PENDOGAS SECURITY SYSTEMS LIMITED “Your First Line of Defence” 44 Modupe Young Thomas Estate, Lekki Phase 2 Lagos, Nigeria Telephone: 08066878713, 08183335202 Email:pendogas@yahoo.com www.pendogassecuritysystems.com

Pendogas Security Systems Limited Company Brief Sell & install Perimeter Intrusion Detection (PID) systems Private, Commercial , Industrial & Military use Providing quality, durable security systems globally Continual research & development to enhance our product range Comprehensive product training and support West African representative for Advanced Perimeter Security Systems Limited, Stirling, UK. APS are the manufacturers of Electro-fence, Flexiguard And Multisys Perimeter Security Products. BS EN IS09001 Quality Systems Accreditation

Complete Perimeter Security Solutions Flexiguard™ Sensor Cable Detection Electro-Fence™ HV & LV Detect & Deter Multisys® Security Management

Complete Perimeter Security Solutions Microguard™ Microwave Detection Multiview™ Remote Site Monitoring Sensor Point™ Point Sensor

Fence & Warehouse Protection Flexiguard™ Fence & Warehouse Protection

Sensor Cable & Analyser Flexiguard™ Sensor Cable & Analyser FEATURES: Early intruder warning Maximum cable flexibility Screened & manufactured to military specification Not effected by electrical or magnetic interference Low voltage operation Unobtrusive system

Sensor Cable & Analyser Flexiguard™ Sensor Cable & Analyser BENEFITS: Can be installed on existing fence or building Resulting in lower installation & maintenance costs Flexible cable can be installed in awkward areas Resistant to interference for excellent audio quality Operates with zener barriers for use in hazardous areas

Chainlink, Weldmesh & Palisade Fence Flexiguard™ Chainlink, Weldmesh & Palisade Fence Typical System Layout

Chainlink, Weldmesh & Palisade Fence Flexiguard™ Chainlink, Weldmesh & Palisade Fence FS-300 – FS-310 Series Analysers

High Security - Cut & Climb Flexiguard™ High Security - Cut & Climb FS-302 Analyser Dual Zone Independent controls for Cut and Climb detection Weatherproof enclosure

Building & Warehouse Security Flexiguard™ Building & Warehouse Security Flexiguard™ will protect: Internal walls of buildings & warehouses Roofs & skylights Lead church roofs Internal metal cages

Building & Warehouse Security Flexiguard™ Building & Warehouse Security WS-100 & WS-110 Analysers

Building & Warehouse Security Flexiguard™ Building & Warehouse Security Typical System Layout

HV, LV & Bipolar Fence Security System Electro-Fence™ HV, LV & Bipolar Fence Security System

Electro-Fence™ System Features: Deters Detects Denies Access

Electro-Fence™ System Purpose built Intrusion Detection with Active Deterrent Gives a “Short Sharp Safe Shock”

Electro-Fence™ System The System releases a pulse of energy Connected to an energiser which fully complies with BS EN 60335-2-76, not to exceed 5 joules of energy measured on a 500 ohm load Systems installed to BS 1722 part 17

Electro-Fence™ System Pulse Diagram

Electro-Fence™ System The system comprises a grid of high tension parallel wires A pulse goes out on a series loop returning to the control unit which monitors the pulse

Electro-Fence™ System

Electro-Fence™ System Alarm Monitoring Alarm threshold typically = 3kv Number of missing pulses = 2

Electro-Fence™ System LV System Features: Cut wire detection Short wire detection Can be used stand alone or with HV system Full integration with HV controllers and Multisys

Electro-Fence™ System LV System Features: Low Voltage fence integrity monitoring Very secure system – does not use DC on fence which is easily defeated Uses an AC tone, 6V peak to peak signal

Electro-Fence™ System Typical Configuration Fence mounted Free standing – full fence Wall Roof topping

Fence Mounted Weldmesh Installation Electro-Fence™ Fence Mounted Weldmesh Installation

Fence Mounted Palasade Installation Electro-Fence™ Fence Mounted Palasade Installation

Typical Free Standing Installation Electro-Fence™ Typical Free Standing Installation

Typical Wall Mounted Installation Electro-Fence™ Typical Wall Mounted Installation

Typical Roof Mounted Installation Electro-Fence™ Typical Roof Mounted Installation

Standard Security Controllers Electro-Fence™ Standard Security Controllers Single Zone Dual Zone Six Zone

High Security Controllers Electro-Fence™ High Security Controllers Electro-Fence Single Electro-Fence Dual LV Fence Monitoring Bipolar Dual Zone

Standard Security Controllers Electro-Fence™ Standard Security Controllers Features: Shock Monitoring Alarm generated when an intruder receives a preset number of consecutive shocks. Voltage Monitoring If an intruder tries to reduce the fence voltage an alarm is generated. Cut Monitoring Alarm generated when wires are cut. Short Circuit Monitoring Alarm generated when wires are short circuited

High Security Controllers Electro-Fence™ High Security Controllers Features: Fence wired as 2 loops High Voltage Low Voltage

High Security Controller Electro-Fence™ High Security Controller Features: High Security controller constantly monitors all the earth wires High voltage can be switched off but the fence is still monitored Additional Monitoring Features: Earth wire cut Earth wire short to live wire Earth wire short to ground

High Security Controller Electro-Fence™ High Security Controller Alarm outputs voltage free contacts. Simple interface to commercially available intruder alarm panels, CCTV and access control systems

Bipolar Controller Every wire is a hot live wire Electro-Fence™ Bipolar Controller Features: Every wire is a hot live wire No alternate live wire pulsing Every wire pulses live at the same time RS485 or Ethernet Communication Multisys Direct Control

Electro-Fence™ Bipolar Controller Typical Wiring:

High voltage contact detects gate opening Electro-Fence™ Gates High voltage contact detects gate opening

Insulators Electro-Fence™ Low loss black UV resistant Water barriers (no wire overlap)

Intermediate Insulators Electro-Fence™ Intermediate Insulators Very effective water barrier

Very effective water barrier (no overlapping wires) Electro-Fence™ End Insulator Very effective water barrier (no overlapping wires)

Flexitop™ For High Security Applications Electro-Fence™ Flexitop™ For High Security Applications

Flexitop™ Electro-Fence™ Flexitop™ consists of 1.5m spring steel post 16 high tensile steel wires One wire attached directly to top of the post

Electro-Fence™ Flexitop™ Flexitop™ is fixed to outside edge of fence with 5 wires below top of fence. Flexible topping creates a very unstable environment making it difficult to climb up.

Security Management System Multisys® Multisys® Security Management System Multisys® is a unique modular PC based Security Management System It uses a common communication protocol to integrate and control the APS Electro-Fence™ controllers, Flexiguard™ analysers and Alarm Control Units

Security Management System Multisys® Multisys® Security Management System This integration allows the system designer the flexibility to construct many different perimeter intrusion detection systems with multiple network configurations.

Security Management System Multisys® Multisys® Security Management System Electro-Fence™ Controller The EF-132 Electro-Fence™ energiser can be controlled from Multisys® using RS485 communication Individual zones can be switched on and off, pulse count varied and voltage levels set at the click of a mouse

Security Management System Multisys® Multisys® Security Management System Flexiguard™ Analyser The EF-302 High Security analyser can also be controlled by Multisys® Each zone can be individually controlled. The cut and climb detection sensitivity and characteristics are set using the on screen menu

Security Management System Multisys® Multisys® Security Management System Alarm Control Unit Up to 2032 alarms can be connected into the Multisys® system Alarm Control Units have 8 programmable inputs and 8 programmable outputs

Security Management System Multisys® Multisys® Security Management System Camera Control Camera Preset commands can be linked to alarm activations so that a camera or group of cameras will move automatically to preset positions on receiving an alarm activation

Multisys® Multisys® Schematic

Remote Monitoring System Multiview™ Multiview™ Remote Monitoring System Multiview™ provides the facility to remotely monitor and control any site which is running Multisys® via LAN or WAN. Using the Internet you can control multiple remote sites worldwide.

Remote Monitoring System Multiview™ Multiview™ Remote Monitoring System Alarm Control Alarms from any remote site are automatically routed through to Multiview™ to alert the operator To view the site the operator selects the site from the site list and then clicks the view button The operator then has full control of the remote site

Remote Monitoring System Multiview™ Multiview™ Remote Monitoring System Remote Monitoring & Control To enable monitoring of a remote site you enter the site IP address and password into Multisys®

Microwave Barrier System Microguard™ Microguard™ Microwave Barrier System Features: Automatic 200m range adjustment Multi-level sensitivity adjustment Microwave sensitivity unaffected by heavy fog, rain or snow Microstrip Antennas Microprocessor Controlled Designed for easy and quick installation High RFI and EMI immunity

Microwave Barrier System Microguard™ Microguard™ Microwave Barrier System The system consists of a Transmitter and Receiver unit The transmitter generates a microwave beam in the X band creating an invisible but sensitive protection zone An intruder entering this zone will immediately be detected and an alarm will be generated It will detect an intruder walking, running or crawling through the protect zone

Solar Powered All the perimeter systems have been designed to be powered from low voltage DC sources including Solar and Wind Power systems.