TARGIS The New CEROMER Material Ceramic optimized polymer

What is the Targis? Light activated veneering material made of Ceromers Ceramics ( esthetics ) + Resins (Flexual strength) Unmatched Ceromer material –75-85 weight % of Inorganic filler –Ceramic particle –Organic matrix

Indications (Targis) Metal-free bridges with Vectris fmwk Metal-free single posterior crowns with Vectris fmwk Metal-reinforced crown, bridge, and implant veneers Metal-free anterior crowns Metal-free inlays,onlays, veneers Metal-reinforced combination dentures

Contraindications Metal-free bridges with more than one pontic between two abutment teeth Allergic patient

Side effects Hypersensitivity on skin - uncured Targis material Avoid eye contact

General Steps Shade selection Preparation of Model –Sealing of die: Die hardener/Separating varnish –Drying is important –Check tolerance with separator

Modelling of wax –Isolation Two coat - 3 min dry on each coat Check the sharp edge area - thin coat

Metal-reinforced crown, bridge, and implant veneers Alloys - Corrosion resistant alloys –Copper and/or silver content: < 50% –Gold, platinum content: < 90% High gold alloys containing more than 90% gold, platinum must only be used in combination with retentive elements

Life Like Esthetics –Translucency –Fluorescence High Flexual strength Enamel-like Abrasion

VECTRIS The New FRC Material Fibre-reinforced composite

Advanced Framework Material –Fibre-reinforced Vectris material –Metal-free, translucent frameworks

Proven fibre-reinforced technology –Composed of several layers of fibre wafers –Uniaxially oriented fibre bundles –Excellent elasticity and distribution of strain

Outstanding translucency –Metal-free, translucent Vectris

High Flexual strength

1. Modelling –Wax up a simple beam-like pontic on the model –Fabricate a silicone key and remove the wax 2. Framework fabrication –Place a Vectris Pontic in the occlusal opening of the silicone key, according to the situation –A process combining vacuum, pressure, and light in the state-of-art Vectris VS 1 produces highly accurate, bubble-free frameworks

3. Finishing –Finish Vectris Pontic and replace it on the model –Reinforce with a Vectris Frame –Optimum adaptation and curing is achieved with the fully automatic Vetrix VS 1 franework former

4. Bridge Framework –The finished framework made of Vectris Pontic and Bectris Frame is ready for the esthetic Targis veneer

Molar framework –Vectris Singles are used to fabricate esthetic single paoterior frameworks easily and accurately

Prefabricated Vectris components Vectris single Vectris pontic Vectris Frame

Vectris Glue Applicator

Vectris VS 1 –Vaccum, Pressure, Light Furnace

Targis on Vectris / Targis on Metal Fabrication of metal-free framework with Vectris –Bond with translucent Targis Base Framework fabrication without mechanical retention –Targis Link to reinforce the bond between the metal and the framework mat4rial –Targis Opaquer

Additive crown buildup and individualized shading –Targis quick –Targis stains –Targis impulse –Targis gingivae –Targis power Adhesive cementation Conventional cementation

Targis Power –High-performance curing unit –Light and Heat Targis Quick –Initial curing light for quick precuring