PHOTOMOD 5.0 Dmitry Kochergin, Head of RACURS Technical support department October 2009, Attica, Greece New level of automation and productivity!

PHOTOMOD 5.0. Main advantages new AAT reliable and precise correlation algorithm up to images in the project no limits for the image size full 16-bit rasters support “dynamic” rebuilding of TIN and contours while editing   new user-friendly interface of tie points manual measurements   block layout from the Exterior Orientation Parameters   direct working with the “source” images   DTM of any size   no “fixed” stages of working with the project   stereo-processing of “any” pair of images   more and more distributed processing   more system openness and reliability   optimal using of modern video cards benefits   powerful 3d window   raster bands managing on any stage of processing   simultaneous access of several operators to the AT-project   WorldView stereoprocessing   and more…

PHOTOMOD 5.0. Automatic Aerial Triangulation terrain: mountains, forest number of images: 629 camera: DMC pixel: 12 mkm / ~ 15 cm GSD processing time: 20 hours 4 minutes

PHOTOMOD 5.0. Automatic Aerial Triangulation terrain: low urban number of images: 762 camera: UltraCamX pixel: 7.2 mkm / ~ 40 cm GSD Processing time: 5 hours 16 minutes

PHOTOMOD 5.0. Automatic Aerial Triangulation PHOTOMOD 4.4: problems in measurements in the strips junctions

Measurements in PHOTOMOD 5.0 PHOTOMOD 5.0. Automatic Aerial Triangulation

PHOTOMOD 4.4: problems with measurements “in the forest” Measurements in PHOTOMOD 5.0

PHOTOMOD 5.0. Automatic Aerial Triangulation PHOTOMOD 4.4 problems:

PHOTOMOD 5.0. Automatic Aerial Triangulation no problems in PHOTOMOD 5.0

PHOTOMOD 5.0. Уравнивание синтетического блока из изображений

PHOTOMOD 5.0. new interface of “manual” tie measurements

PHOTOMOD 5.0. Block layout from exterior orientation parameters

PHOTOMOD 5.0. “Source” images with a point measurements

PHOTOMOD 5.0. Images oriented in accordance with block layout

PHOTOMOD 5.0. QuickBird images > 20 gigabytes

PHOTOMOD 5.0. Block with “big” overlap areas

PHOTOMOD 5.0. Stereopair from any overlapping strip images

PHOTOMOD 5.0. Stereopair from different strips overlapping images

PHOTOMOD 5.0. TIN and breaklines New breaklines embedding algorithm PHOTOMOD 5.0 PHOTOMOD 4.4

PHOTOMOD 5.0. TIN and contour lines “Dynamic” contoursFinal smooth contours

PHOTOMOD 5.0. Distributed processing

PHOTOMOD 5.0. DEM (> 10 gigabytes)

RGBI image processing

PHOTOMOD D window

PHOTOMOD D objects to be exported to AutoCAD

PHOTOMOD 5.0 Thank you for attention !