MANUFACTURING. Storage of materials, mostly different types of woods.

Slides:

Advertisements

Similar presentations

Architectural Services Department HKSAR Laboratory Design for Secondary Schools.

Advertisements

Timber Derivatives- Manufactured Boards

The term gluing means to assemble parts with a glue or adhesive.

Adhesives Questions 1)What is the best kind of clamp to use when gluing wood edge to edge? A.Spring clamp B.Bar clamp C.C clamp D.Hand screw clamp.

The Making of a Quarter Map. Making of the Pop's Shop Quarter Map 2 Cutting and Staining the Map The first step in making a Quarter map is cutting out.

Wood Technology Carpentry Wood Joinery Manufacturing Technician.

What adhesive would you use mainly for wood, but can be used on paper, card, foam board and foam blocks. When you place a piece of paper over another,

STAGES OF PAPER MANUFACTURE

Drill Press. General Safety Wear your safety glasses at all times Take off all jewelry Do not wear loose clothing Make sure you are the only person in.

A story about a tree Inspired by “The giving tree”, Sheldon Silverstein.

INDUSTRIAL TECHNOLOGY-TIMBER

WOOD JOINTS Items to consider when choosing a wood joint.

Portable Power Planes, Routers, and Sanders

Choose my guitar template for “Big Blue”. Cut out two pieces of woods from a long wood. (Then, little bit longer than my guitar body template scale.)

Engineering Manufacturing Facilities

TOOL: Radial Arm Saw NEXT STEP: Radial Arm Saw RESULTS: Finish Top Apron Pieces at 9” L x 4” W x ¾ “ Th PROJECT Square Plant Stand PART Top Apron # NEEDED.

Chapter 16 Processes Used to Form WoodMaterials. Objectives Two basic wood forming processes: bonding and bending. Composition boards: hardboard, insulation.

MANUFACTURING PROTOTYPE How do all the aspects of manufacturing come together to make a final product?

Mantle Clock. Beginning Steps Cut 2 piece 20 x 5 to make the 2 sides and top/bottom Cut 1 10 ¾ and 1- 9 from each 20 piece. This will make a side and.

STRUCTURE & WORK CONTEXT OF THE INDUSTRY. Economic Importance  Australia's Furnishing Industry contributes wealth of the Australian economy as follows:

When I am reading at night I have no light source so if I have a light beside me then I wont have to strain my eyes. The lamp/table will be the height.

Building a clock PART 1: The Body. Gathering materials  The wood that you will be using is called Maple. You can identify it by knowing that it is: Heavy.

Planning Manufacture TaskEquipmentQC/QA Mark out the shape of the speaker front and back Tri square, pencil, ruler, tape measure.

Taxonomy of Wood Products Engineered Wood Products

LAP JOINT The Lap Joint is: basically one piece of wood is laid (lapped) over another piece of wood, and the two pieces fastened together in the contact.

BE PREPARED TO TAKE A FEW NOTES TODAY… Pick up the pink sheet at the front.

Building the Footstool P R O J E C T O V E R V I E W.

GCSE Graphic Products Surface Developments or nets Summer Examination 2011.

Product Design AQA GCSE

Industrial Revolution Time Period Following the War of 1812 through early 1900s.

Construction of “Curio” style Cabinet by Miguel Del Real.

IPC Assembly and Test Palletization of parts is a standard process in many instances for both test and assembly. This can be achieved using.

Chapter One Introduction To Cabinetmaking Pg

Now you have all the materials you need, now you’re ready to put the boards down and measure. When you measure you draw a line and then you cut the boards.

Proposed Agriculture Courses Board of Education October 6, 2015.

Cabinetmaking 1 Mr. Higgins. ► Review ► Descriptions ► Outlines ► Course Competency ► Expectations ► Materials.

Router Router What does a Router Do? Removes wood by using different shaped cutting bits.

Session 2 Jigs and Formers

The Production Process What are the four stages of production? How are things mass produced?

FROM RAW TO READY Lesson 6 Notes. LESSON OBJECTIVES By the end of this lesson you should be able to:  explain how a given resource is prepared for public.

 Segmented Bowl Senior Woodwork. Overview  Materials and machines  4 step procedure: layout, cutting, laminating, turning.  Final product.

What is today’s topic? Instructions: Use this phone pad diagram as the key to unlocking the topic for today. Example 4 is either G , H , I “

Nathanael O’Hara. IDEAS I Researched Games Tables I liked these designs in part I decided to mesh the designs into something I liked and also could work.

Manufacturing: Wooden Pencil

BETHS PENCIL BOX. This is a pictures of my 250 mm piece of wood This is my piece of wood cut half way and I am about to chisel it!

A problem that I have is I need a small to fit in the limited available space beside my bed. For my final craft and design project therefore I have decided.

Revision Topics – General areas Design Process – Analysing, Designing, Evaluating, (anything linked to completing a mini coursework project within the.

There are 2 classification of wood joints: 1.Permanent 2.Temporary.

Design and Manufacture

Place template on top as guide for cutting

Production Planning – Designing Tooling

Manufactured boards Manufactured boards are timber sheets which are produced by gluing wood layers or wood fibres together. Manufactured boards often made.

Kerry J Donovan Furniture Design

Taxonomy of Wood Products Engineered Wood Products

There are 2 classification of wood joints:

Buy Furniture Online | Solid Wood Furniture

Materials Training Board Section 11/18/2018.

AQA GCSE 2 Working with timber based materials and fixings

Starter of the day Book 1 page 4

BC Technology Education Association

Industrial Technology Timber Stage 5

CUSTOMER (Requirements) CUSTOMER (Satisfaction)

Remember you can revise at home!

BC Technology Education Association

Evaluating and Improving a Manufacturing System Mock Preparation

Designing and Turning a Beads of Courage Segmented Bowl

Biggest Problems: Biggest Threat: Deviation of lamellas

British Woodworking Federation

BC Technology Education Association

Presentation transcript:

MANUFACTURING

Storage of materials, mostly different types of woods

Cutting materials to a manageable size, note Health and Safety requirements

British Rail templates

Cutting materials to size

Wood: planed, glued and clamped together for one of the products

Wood being cut to size, note Health and Safety requirements.

Material prepared ready for laminating the edges

Laminated boards ready for further manufacture

Industrial sanding machine

Materials being prepared

The machine for laminating the edges of the boards

Laminating edges of boards, close up.

Spray booths, note Health and Safety

Assembling the furniture on a production line

Assembly line, movement through the factory on a basic roller arrangement

Completed items in storage area.