Thermal-mechanical Metal-forming Simulations in LSDYNA (revisited) Rudolf Bötticher TMB GmbH
Ulm, Motivation Assess adaptive (space, time) coupled simulations (SOLN=2) with plastic heating for nodal pressure tetraheadrons (ELFORM=13) and EFG elements. Assess adaptive (space, time) coupled simulations (SOLN=2) with plastic heating for nodal pressure tetraheadrons (ELFORM=13) and EFG elements. 1. Methods and Keywords 2. Adaptive 3D (EFG) Tets 3. Adaptive axi-2D 4. Conclusions
Ulm, Caution: SMP vs. Serial! Using Real DMF solver and MMD ordering stiffness matrix data number of equations = 4957 stiffness coefficients = 0.1 Mw expanding memory to imfisgy sym. storage 1 expanding memory to imfisgy sym. storage 3 Memory Requirements: incore out-of-core TOTAL for linear algebra = Mw TOTAL for entire job = Mw TOTAL available = Mw expanding memory to imfisgy numeric storage ic an INCORE solution will be performed Symbolic Factorization CPU = 0.000E+00 seconds Numeric Factorization CPU = 1.000E+00 seconds Using Real DMF solver and MMD ordering stiffness matrix data number of equations = 3640 stiffness coefficients = 0.0 Mw expanding memory to imfisgy sym. storage 1 expanding memory to imfisgy sym. storage 2 expanding memory to imfisgy sym. storage 3 Memory Requirements: incore out-of-core TOTAL for linear algebra = Mw TOTAL for entire job = Mw TOTAL available = Mw expanding memory to imfisgy numeric storage ic an INCORE solution will be performed Symbolic Factorization CPU = 0.000E+00 seconds ******************************************************** * - WARNING - * * 544 negative eigenvalues detected during * * factorization of linear equation system. * ******************************************************** Implicit needs no mass scaling. Thermal always implicit!
Ulm, Keywords *CONTROL_ADAPTIVE *CONTROL_ADAPTIVE *CONTROL_REMESHING *CONTROL_REMESHING *SECTION_SOLID_EFG *SECTION_SOLID_EFG1,411.4,1.4,1.4,,,4,3 *CONTROL_IMPLICIT_GENERAL/AUTO *CONTROL_IMPLICIT_GENERAL/AUTO *CONTROL_THERMAL_SOLVER/TIMESTEP *CONTROL_THERMAL_SOLVER/TIMESTEP
Ulm, Single frames printed as *.jpg and mounted with Gifmerge. Scripting critical. EFG has a mesh. Not adaptive alone. Adaption may fail at complicated surfaces. LSPP Windows: saving of juxtaposed animation impossible. 3D Remarks: Results of explicit, implicit, adaptive and explicit EFG are sound.
Ulm, Better concept for displaying plastic strain at a given point for adaptive needed for LSPP Plastic strain is projected correctly during adaption. Element and node numbers are reused! Adaptive EFG works in explicit. Severe constraints on time step for mass scaling. 2D-axi Remarks: EFG
Ulm, projects plastic heating during adaption faulty. 2D-axi Remarks:
Ulm, Concluding Remarks Lacking a more intuitive definition of SPC boundary conditions and forcing functions that are robust unter switching between implicit, explicit and adaptive. Lacking a more intuitive definition of SPC boundary conditions and forcing functions that are robust unter switching between implicit, explicit and adaptive. Advantages of EFG often limited. Advantages of EFG often limited. Projections of plastic heating for axi-2D false. Projections of plastic heating for axi-2D false. LSPP on Windows has still room for improvements. LSPP on Windows has still room for improvements.