Presentation is loading. Please wait.

Presentation is loading. Please wait.

Finite Element Method (FEM) Different from the finite difference method (FDM) described earlier, the FEM introduces approximated solutions of the variables.

Similar presentations


Presentation on theme: "Finite Element Method (FEM) Different from the finite difference method (FDM) described earlier, the FEM introduces approximated solutions of the variables."— Presentation transcript:

1 Finite Element Method (FEM) Different from the finite difference method (FDM) described earlier, the FEM introduces approximated solutions of the variables at every nodal points, not their derivatives as has been done in the FDM. The region of interest is subdivided into small regions that are called “finite elements”. It will then be assumed that some predetermined function ( such as  (x,y,z,t)) in terms of dependent variables (such as the spatial and time coordinates, x,y,x,z & t) can be used to replace the dependent variable (T(x,y,z,t)at the node (with unknown coefficients (a i ) to be determined). This function has to satisfy both the governing equation (heat diffusion equation for heat transfer problem, for example) at every nodal points and the boundary condition at every exterior nodal points. By substitute this function into every points we can obtain a system of algebraic equations in terms of the unknown coefficients (a i ). This system of equations can then be solved using standard numerical schemes described before.

2 Finite Element Example Determine the temperature distribution of the flat plate as shown below using finite element analysis. Assume one-dimensional heat transfer, steady state, no heat generation and constant thermal conductivity. The two surfaces of the plate are maintained at constant temperatures of 100°C and 0°C, respectively. T=100°C T=0°C 1 2 3 L=3 First, divide the plate into three elements (1,2 & 3). The temperatures of these three elements are represented by their nodal temperatures T 1,T 2 & T 3, respectively. Next, assume the temperature is a function of its coordinate: T(x)=Ax 2 +Bx+C. A,B & C are three constants. Finally, determine the constants using the governing equation and all corresponding boundary conditions. x 1 =1/2 x 2 =3/2 x 3 =5/2

3 Example (cont.) To simplify the solution, we can apply the governing equation first: Therefore, A=0 for all nodal temperature functions. This is no surprise for us since we know the steady state, no generation, 1-D heat transfer should have a linear temperature distribution. Therefore: T(x)=Bx+C and the three nodal equations are: T 1 =Bx 1 +C=(B/2)+C, T 2 =Bx 2 +C=(3B/2)+C, T 3 = Bx 3 +C=(5B/3)+C Therefore, there are only two constants to be solved and they can be determined using the two boundary conditions. At the left-side surface, the temperature is a constant 100°C and there is a constant heat transfer into the element 1 and the same amount of the heat is transferred to the element 2 since there can be no heat accumulation inside the element to satisfy the steady state condition. q (left surface to element 1) = q (element 1 to element 2)

4 Example (cont.) zero The second equation can be determined by using the boundary condition on the other side of the plate:

5 Example (cont.) This equation satisfies both boundary conditions: T(x=0)=100°C and T(x=3)=0 °C. For most finite element problems, we have to use thousands or even millions of elements in order to resolve as much detailed information as possible. Therefore, a fast numerical solver for the matrix (system of equations) is necessary to obtain satisfactory results. The use of numerical scheme has been discussed previously when we introduce the finite difference method.


Download ppt "Finite Element Method (FEM) Different from the finite difference method (FDM) described earlier, the FEM introduces approximated solutions of the variables."

Similar presentations


Ads by Google