REBUS, Inc. New Product Showcase 205 West Bridgewater Road, Aston, PA 19014 PRESENTED TO 2006 Annual Meeting Montreal, Quebec, Canada September 12, 2006

“Color Department for the Thermoset Plastics Industry,” Agenda Rebus Introductions General Product Overview New Products Benzoate Ester dispersions for hot cure urethane elastomers D2000 dispersions for polyurea coatings Desmophen NH 1420 dispersions for polyaspartic coatings Oligomer Dispersions for energy curable films and coatings “Color Department for the Thermoset Plastics Industry,”

Introduction/Mission Specialty chemical manufacturer Color and additive dispersions Paste or liquid form Thermoset plastics industry Custom tolling services for creating effect chemicals The Color Department for the Thermoset Plastics Industry Entrepreneurial and agile Capable of rapidly responding with customized solutions Line of standard products “Color Department for the Thermoset Plastics Industry,”

“Color Department for the Thermoset Plastics Industry,” Company Overview Founded in 1992 Hands-on management team with industry experience since 1976 ISO 9001:2000 certified TS 16949, 4Q06 Modern, well appointed plant Three-acre site, 40,000 square feet 10 miles / Philadelphia International Airport Convenient to major highways Fully-equipped laboratory Proactive R&D capability State of the art color spectrophotometry “Color Department for the Thermoset Plastics Industry,”

“Color Department for the Thermoset Plastics Industry,” Core Product Lines Urethanes Series 1000 Polyester Polyols Series 2000 Polyether Polyols Series 3000 HMW Polyether Polyols Epoxies (All Series 6000) Bis A Bis F Epoxy Novolacs Color Pack 6000CP Non-float 6000NF Polyesters Series 4000 Series 5000 Series 8000 “Color Department for the Thermoset Plastics Industry,”

“Color Department for the Thermoset Plastics Industry,” New Product Lines Hot Cure Urethane Elastomer Series 70000 Benzoate Ester Series 70000 plasticizers are formulated using Benzoflex 9-88 plasticizers, an excellent diluent for many urethane elastomer formulations and ideal for introducing color into the prepolymer. Pigments: Organic and Inorganic pigments. “Color Department for the Thermoset Plastics Industry,”

“Color Department for the Thermoset Plastics Industry,” New Product Lines Polyurea Series 60000 Polyamine Dispersions Series 60000 dispersions are pigment and additive dispersions based on D2000 primary polyether amine. Although not required by the PDA definition of a pure polyurea Rebus considers this the ideal method for coloring the resin component in polyureas. Pigments: Organic and Inorganic pigments. “Color Department for the Thermoset Plastics Industry,”

“Color Department for the Thermoset Plastics Industry,” New Product Lines Polyaspartic Esters Series 10000 Polyaspartic Ester Dispersions Series 10000 dispersions are pigment and additive dispersions based on Desmophen NH 1420 which is the ideal method to introduce color in your high performance aliphatic polyurea coatings. Pigment: Iron oxides and high performance organic pigment for excellent light fastness and weather resistances. “Color Department for the Thermoset Plastics Industry,”

“Color Department for the Thermoset Plastics Industry,” New Product Lines Series 9000 Oligomer Dispersions Urethane Acrylate Oligomer Rebus’ Series 9000UA products are made using a viscous aliphatic urethane acrylate oligomer. This series offers the best light-fastness, but due to the high viscosity of the oligomer, these dispersions have a thick, paste-like consistency. End Uses: Wood Coatings, High Performance Coatings, Electronics Pigments: transparent iron oxides for wood coating, and high performance organic pigment for excellent chemical and weather resistances. Polyester Acrylate Oligomer Rebus’ Series 9000PA products are made using a low viscosity aliphatic polyester acrylate oligomer. This series offers good light-fastness with a high pigment loading at pourable viscosities. End Uses: Wood Coatings, Inks, Coatings, Electronic Epoxy Acrylate Oligomer Rebus’ Series 9000EA products are made using a low viscosity epoxy acrylate oligomer. This series is not recommended for exterior applications due to the epoxy backbone of the oligomer. The dispersions in this series utilize high pigment loading at pourable viscosities. End Uses: Graphic Arts, Inks, Electronics Pigments: organic pigments designed for indoor applications. “Color Department for the Thermoset Plastics Industry,”

“Color Department for the Thermoset Plastics Industry,” Tolling Services Tolling Any liquid (polymer) with a flash point >200o F Any non-hazardous granular or crystalline chemical “Color Department for the Thermoset Plastics Industry,”

“Color Department for the Thermoset Plastics Industry,” R ● E ● B ● U ● S I ● N ● C www.rebusinc.net “Color Department for the Thermoset Plastics Industry,”