7.62x 51 SSP Subsonic Penetrator Provides superior accuracy, stealth and penetration capability McLean, VA USA

Typical Problems with Subsonic Ammo Significantly limited effective range, often less than 200 yards Limited penetration capability, due to reduced velocity and terminal energy Weapon jamming/ failure to cycle, due to lower gas pressures Reduced accuracy, due to reduced chance of a ‘clean burn’ and velocity variation Increased weapon fouling Increased chance of projectile obstructing, due to lower pressure DSG’s SSP -Subsonic Penetrator solves these issues

Solution Introducing the 7.62x51-SSP (Subsonic Penetrator) The SSP provides military and LE agencies new and innovative subsonic capabilities Reliable Source: Developed and tested in Norway Manufactured in the USA (Idaho) Maximum effective range: 600m Highly effective materiel and armor penetration Low angle penetration Accuracy: 1.4MOA-Non Optimized Normal weapon function and cycling Exceptional cross-wind stability

Specifications-(7.62x 51 SSP Subsonic Penetrator) Bullet weight, gram 19.25 ± 0.05 (297grain) Ammunition weight, gram 31.5 (486 grain) Ammunition length, mm 70.6 (2 25/32 In) Barrel length, mm 560 (22 In) Velocity (V); energy (Е); flight time (T); trajectory (Y) and drop (Z) at range (Х) Х V Е T Y Z m m/seс Joulе seс 330.0-1082 ft/sec 1045 50 324.4 1010 0.15 + 0.12 + 0.36 + 0.60 + 0.005 100 319.9- 1049 ft/sec 982 724 KE 0.31 ZERO + 0.48 + 0.97 + 0.01 150 315.7 957 0.47 – 0.36 + 1.11 + 0.02 200 311.8 1023 ft/sec 933 688 KE 0.62 – 0.96 + 0.99 + 0.04 250 307.9 910 0.79 – 1.81 – 0.61 + 0.62 + 0.06 300 304.0 997 ft/sec 887 654 KE 0.95 – 2.92 – 1.49 + 0.09 350 300.2 865 1.12 – 4.30 – 2.62 – 0.89 400 296.5 844 1.28 – 5.95 – 4.03 – 2.05 + 0.16 450 292.9 824 1.45 – 7.87 – 5.72 –3.49 + 0.20 500 289.2 803 1.62 – 10.09 – 7.69 – 5.22 + 0.25 550 285.5 782 1.80 – 12.59 – 9.96 – 7.24 + 0.30 600 281.8 921 ft/sec 762 1.98 – 15.40 – 12.53 – 9.56 Penetrated range of 8mm steel plate 100 – 150 m (109-164 yards) Penetrated range of 6mm steel plate 450 – 550 m (492-601 yards) Penetrated range of 6mm/600 steel plate 250 – 300 m (273-328 yards) Penetrated range of 5mm/450 steel plate 100 – 150 m

Weapon: AR-10 with a suppressor Weapon Function Test Weapon: AR-10 with a suppressor Results: Normal weapon function and cycling using the SSP subsonic ammunition

Tested with the Dragon-1 Modular Suppressor Technology / Product Modular lightweight suppressor Monolithic modules, machined from solid bar Stainless Steel with inconel baffles No moving parts, no welds, highly durable Disassemble for inspection or cleaning Q-Lock (Quick Release/Mounting – one hand) operation Customizable and mission-specific Compatible with 3rd party flash hiders Improved Barrels & Suppressors Current TRL level 9 Projected price in quantity 1000-1200USD Suppressor is available for T&E now Weapon-specific variants subject to demand The So What No moving parts ensure fail-safe operation, even in tough conditions. No welds to break. Single handed patented Quick Release/Mounting , , , saves time and reduces operational risk Modular design enables mission-specific version, to suit specific requirements of size, weight and performance. Better suppressor performance, extended life, ease of use, enhanced value for money through modular , design.

Weapon: Remington and AR-10 Accuracy Test 7.62 SSP at 300 meters 7.62 SSP at 300 meters Weapon: Remington and AR-10 Ammo: 7.62 SSP Suppressor: Dragon-1 Range: 300 meters

300m range, 1.4 MOA Pre-production Weapon: Remington 700 rifle Barrel length 26" Range: 300 meters Angle: 60 degree Results: Dispersion of five 7.62 SSP bullets: (A) 11.5 cm (4.5 in) Accuracy: 1.4MOA.

300m, 2.4MOA – Pre-production Weapon: AR-10 Results: Barrel length 24" 7.62 SSP Subsonic ammo Range: 300 meters Angle: 60 degree Results: Dispersion of five ×3 lots 7.62 SSP subsonic bullets: (B, C and D) 18 - 20 cm (7-7.8 in) Accuracy: 2.4MOA

Penetration Test- 90 deg NOTE: 8-mm, 6-mm, 5mm and 4mm steel S355MC with tensile strength Rm=355-550 MPa used in all tests.

6mm steel, 90 degree, 600m Results Weapon: Remington Range: 600m Angle: 90 degree Velocity at impact: 295 m/s - (977 ft/sec) Results Projectile penetrated 6mm steel plate, plus 2mm aluminum plate Projectile did not break after penetration of 6-mm steel – see the photo of 2-mm aluminum plate, placed behind steel target. The subsonic bullet penetrated 6mm steel plate at 600m range.

8mm steel, 90 degree, 150m Results (Steel plate S355MC) Weapon: AR-10 Range: 150m Angle: 90 degree Velocity at Impact: 321 m/s- (1053 ft/sec) Results Bullet can penetrate 8mm steel plate “S355MC” Bullets before and after penetration of 8-mm steel: (A) projectile before shot (B) two 7.62 SSP projectiles after penetration of 8mm steel

Inclined Target Penetration Test NOTE: 8mm, 6mm, 5mm and 4mm steel S355MC with tensile strength Rm=355-550 MPa used in all tests.

8mm steel, 60 deg, 300 meters Weapon: Remington 700 rifle Results: Barrel length 26" Range: 300 meters Angle: 60 degree Results: Several 7.62 SSP penetrated 8mm steel plate set at 600 angle at 300 meters

6mm steel, 60 deg, 300m Weapon: AR-10 Barrel length 24" 7.62 SSP Subsonic ammo Range: 300 meter Angle: 60 degree Results: All fifteen 7.62 SSP rounds penetrated the 6mm steel plate at 600 angle at 300 meters

Windshield Test

Windshield, 30 deg, 350m – 7.62 SSP Results Weapon: AR-10 The windshield (A) was set at an 30.90 angle for the first shot. Velocity at the impact in windshield: 300 m/s-(984 ft/sec) Range: 350 meters Results No change in projectile trajectory, however projectile tumbled after impacting windshield and struck 5mm steel plate (B) then ricocheted back into windshield (C).

Windshield shot: 29.5 deg, at 50 meters Weapon: AR-10 The windshield (E) was set at an 29.50 angle Velocity at the impact in windshield: 320 m/s- (1049 ft/sec) Range: 50 meters Results: No change in projectile trajectory, tumbled after impacting windshield and struck 5mm steel witness plate sideways (F) then ricocheted back into windshield (G). D0 – 7.62 SSP projectile before firing; D1 – first shot into windshield; D2 – second shot into windshield; D3 – third shot into windshield;

Windshield shot: 29.5 deg, at 50 meters Weapon: AR-10 The windshield (E) was set at an 29.50 angle Velocity at the impact in windshield: 320 m/s- (1049 ft/sec) Range: 50 meters Results: No change in projectile trajectory, tumbled after impacting windshield and struck 5mm steel witness plate sideways (F) then ricocheted back into windshield (G). D0 – 7.62 SSP projectile before firing; D1 – first shot into windshield; D2 – second shot into windshield; D3 – third shot into windshield;

Windshield, compound angle shot: 45 deg (H), 35 deg (V), at 200 meters Weapon: AR-10 The windshield (H) was set at 350 and 42.20 angle for third shot. Projectile velocity at impact in windshield was 312 m/s (1023 ft/sec) at 200meters Results Projectile trajectory did not change, however projectile broke into 2 fragments after impacting windshield. Two fragments penetrated 4mm + 2mm aluminum witness plates (K).

Car Door Test

Car door, 43 deg, at 100m range Weapon: AR-10 Target: Car-door (L) Angle: 42.90 Range: 100 meters Velocity at impact in windscreen: 319 m/s. (1046 ft/sec) Weapon: AR-10 Results: No change in projectile trajectory, however projectile “key holed” after penetration of door (L and M) and tumbled after striking 5mm steel (P)

Available Calibers 7.62mm (7.62x51) 300 Blackout 5.56mm (5.56x45) Pre-production Samples available for testing 5.56mm (5.56x45) Currently testing .50 and .338 Under development

For more information, please contact: Thank you. For more information, please contact: sg@inter2t.com * 703-929-0595 McLean, VA 22101