SIMATIC Overview Automation and Drives SIMATIC Industrial Automation System

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart2 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems System family High-performance range Medium range Micro PLC S Programming devices + STEP 7 software + Distributed I/O + Human machine interface S7-400 PC-based Control S7-300 Control system C7 Controllers

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart3 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems SIMATIC S the universal PLC High level of efficiency Compact design requiring a minimum amount of space, e.g. CPUs only 40 mm wide Graded line of CPUs Integrated communications interfaces Maintenance-free Wide range of applications Extensive line of modules for an exceptionally wide variety of applications, such as closed-loop control, positioning and cam control Line of fail-safe CPUs: fail-safe and standard applications on a single CPU, making separate fail-safe controller unnecessary System solutions for production engineering Controllers

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart4 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems SIMATIC S7-400 – our most powerful PLC High performance High processing speeds and determinism for short machine cycle times Isochrone mode for controlling high-speed machines Communication included Multicomputing Space-saving thanks to the highest channel density among I/O modules Wide range of applications Special machines, plant construction, process industry High-availability and fail-safe applications System solutions for production and process engineering Controllers

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart5 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems SIMATIC WinAC – PC-based Control PC-based Automation with WinAC Control, data processing, communication, visualization and technology on a single PC Use of open PC-Standards (OPC, ActiveX) Integration of existing C/C++ libraries and PC hardware Wide range of applications Software PLC for data-intensive applications and for real-time applications with deterministic behaviour Slot PLC with its own safety on board Software PLC for the Multi Panel MP 370 – the compact and rugged solution Controllers SIMATIC WinAC – the flexible basis for innovative solutions

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart6 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems Control Systems SIMATIC C7 S7-300 and Operator Panel in a single compact device Location direct at the machine Less mounting effort through ready-to-use complete solution Less initial costs compared to modular solution Complete machine controls in the most restricted possible space Controllers

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart7 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems SIMATIC Safety Integrated – From proprietary solutions to failsafe PLCs Failsafe and fault- tolerant systems Previous solution New solution with SIMATIC Safety Integrated Standard and failsafe I/O DP slave PROFIBUS with PROFIsafe profile Standard and failsafe PLCs EMERG- ENCY-OFF e.g. Safety bus Standard I/O DP slave POFIBUS Standard SIMATIC PLCs Failsafe third-party PLCs EMERG- ENCY-OFF

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart8 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems Fault-tolerant SIMATIC S7 Failsafe and fault- tolerant systems Fault-tolerant, failsafe systems SIMATIC S7-400FH The fault-tolerant SIMATIC S7 for time-critical processes with switchvoer times < 100 ms Compliance with the highest safety grades IEC (to SIL 3) EN 954 (to Category 4) IEC NFPA 79 – 2002 Fault-tolerant systems SIMATIC S7-400H The fault-tolerant SIMATIC S7 for time-critical processes with switchover times < 100 ms SIMATIC S7 Software Redundancy The software solution for non-time-critical processes with switchover times in the seconds range

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart9 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems SIMATIC ET 200 Distributed I/O The right solution for any requirements Benefits Saves space in the control cabinet Cuts down on the amount of wiring Solutions for control cabinets From bit modular to block I/O With motor starters and failsafe modules For potentially explosive atmospheres Solutions without control cabinets Modular, integrated motor starters and frequency converters Low-cost block I/O Solution for robots, resistant to welding chips Distributed I/O

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart10 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems SIMATIC PCS 7 Process Control System – Fulfills all requirements made on a modern DCS Uniform automation for production and process engineering based on SIMATIC Plant-wide, consistent engineering for all components based on a common database Flexibility attained through scalable performance and modular design Distribution near the process too with intrinsically safe PROFIBUS PA Highlights of the new version Configuration modifications during operation Very large framework quantities and high performance Much shorter engineering and turnaround times Extremely powerful batch system with validation support PCS 7

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart11 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems SIMATIC Software - For all phases of a project Operation Diagnostics Remote maintenance Test / Commissioning Simulation Diagnostics Test functions Programming Standard languages Task-oriented Hardware configuring Controllers I/Os Networks Shorter test phase Faster configuration Software / Programmers

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart12 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems SIMATIC PC – always the right industrial PC SIMATIC Box PC for machine level use SIMATIC Rack PC for 19“ control cabinets and consoles SIMATIC Panel PC for use direct at the machine, in consoles or in control cabinets Modern PC technology in rugged and industrial design PC-based Automation

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart13 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems Always completely in the picture with SIMATIC Machine Vision Intelligent Vision Sensors for application-specific image processing VS 110 – Form inspection VS 120 – Object inspection VS 130 – Data-Matrix-Code Reader General Purpose Systems – for universal use in any production system VS 710 Smart Camera VS 720-series: VS 721 CMOS VS 722 Basic VS 723 Performance VS 724 High Resolution VS 725 Color Machine Vision

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart14 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems SIMATIC HMI Operator Devices for any Requirements Complete, price-optimized family for applications near or at the machine: From the pushbutton control Panel up to Panel PC For stationary or mobile use High operating convenience with ergonomic keypad or intuitive touchscreen Rugged and compact Great variety of PLCs can be connected Comprehensive language support including Asian languages One uniform configuration software: SIMATIC ProTool HMI / NET

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart15 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems Micro Automation – Logic module LOGO! LOGO!Pure LOGO!Basic High functionality 34 ready to use functions 130 connectable blocks Display with backlit Max. 24DI/8AI/16DO Different expansion modules Simple programming On the device or on the PC with LOGO!Soft Comfort Connection of functions via drag and drop Offline-Simulation and Online-Test Professionell Documentation Low-priced solution for small automation tasks Micro Automation

SIMATIC Overview Automation and Drives Overview SIMATIC Industrial Automation System Component based Automation Controllers Technology Distributed I/O Software / Programmers Machine Vision PC-based Automation HMI / NET PCS 7 Micro Automation A&D AS, 07/2003, Chart16 © Siemens AG Subject to change without prior notice Failsafe and fault- tolerant systems Micro Automation – Micro PLC S7-200 Modular with 5 CPU´s Open in communication On-board communication (PPI) PROFIBUS slave AS Interface master Modem communication Ethernet and Internet connection Outstanding real-time response Simpliest programming with 13 wizards Extensive command set Operating and monitoring with SIMATIC Text Display or Touch Panel Micro Automation SIMATIC S7-200 Low-priced PLC´s with extensive performance.