Signal port flange and beam pipe Norihito Ohuchi 2009/10/27122nd S1-G Webex meeting.

Slides:

Advertisements

Similar presentations

Interface of Plug-Compatible Cryomodule Components KEK Norihito Ohuchi 2008/3/41GDE-Sendai Meeting.

Advertisements

E. Kako (KEK) Webex Meeting in May 24th, Status and Disassembly Plan of S1-G Cryomodule.

Progress and Plan for Superconducting RF Cavity RF Group.

EXPERIENCE FROM KEK Norihito Ohuchi 2009/11/9-101 Workshop on cryogenic and vacuum sectorisations of the SPL.

CRYO PIPING & INTER-MODULE CONNECTIONS Yun He, Daniel Sabol, Joe Conway External Review of MLC Daniel Sabol, MLC External Review 10/3/2012.

Internal Cryomodule Instrumentation Sensors, Actuators, Heaters, and Wiring ERL Main Linac Cryomodule 9/5/2012 Peter Quigley Internal Design Review.

Alignment and assembling of the cryomodule Yun He, James Sears, Matthias Liepe MLC external review October 03, 2012.

Cavity Integration summary H. Hayano April 25, 2008 ILC-SCRF

Progress of SC RF Cavity during the RF Group May 10, 2007.

1.3 GHz FNAL Dressed Cavity S-1 Global Deliverable to KEK 7 July 2009.

TDR Part 2: 3.3 Cavity Integration (10 pages) H. Hayano Baseline Design based on the meeting discussion.

Heat load study of cryomodule in STF

S1G Experiment Schedule Plan H. Hayano. Assembly work after cavity arrived Assumption: cavity with VT, with pickup antena, with Ar or N2 filled,

Cavity status; recent KEK activities : Hayano (1) STF CM-1 cavities are; MHI-014: 3-rd VT:36MV/m (finished) MHI-015: 3-rd VT: > 18.4MV/m.

Internal Cryomodule Instrumentation ERL Main Linac Cryomodule 10/10/2015 Peter Quigley, MLC Design Review.

S1 Global Module Cavity String Assembly Workflow Tug Arkan January 15, 2010.

LCLS-II cryomodule alignment. 2 Wednesday meeting, 6/17/2015 Topics Alignment of Components inside the CM Tunnel Network Tolerances LCLS-II cryomodule.

Absorber Production Status Contents (1)MICE absorber design/status (2)MICE absorber instrumentation (3)Schedule (4)Summary Sasanqua at KEK on 13-DEC,’09.

FNAL Cavities for S1 Global Jim Kerby ALCPG 09. FNAL Deliverables Discussed in meetings 15/16 July and 10/11 Sept, and Webex and s 9/30/20092FNAL.

Detail discussion of S1 Global at STF H. Hayano (KEK) GDE Mar 3-6, 2008.

Cryomodule Design and R&D during the EDR phase Robert Kephart With input from the T4 CM Collaboration.

Parallel session summary ML/SCRF L. Lilje, H. Hayano, N. Ohuchi, S. Fukuda, C. Adolphsen (with help of Chris Nantista) TILC09,

Requirements concerning the interface linking the BPM to the quadrupole M. Wendt, S. Zorzetti.

S1G Experiment Schedule Plan; H. Hayano ILC10 GDE meeting.

5 K Shield Study of STF Cryomodule Norihito Ohuchi, Norio Higashi KEK Xu QingJin IHEP 2008/3/3-61Sendai-GDE-Meeting.

Test plan for SPL short cryomodule O. Brunner, W. Weingarten WW 1SPL cryo-module meeting 19 October 2010.

Date 2007/Oct./25 FNAL-GDE-Meeting Global Design Effort 1 Cryomodule Report N. Ohuchi KEK 1.Cryomodule & Cryogenics KOM 2.GDE-meeting discussion I.Interface.

Summary （ Cryomodule, Plug-compatible Interface) Norihito Ohuchi.

Date 2007/Oct./23 FNAL-GDE-Meeting Global Design Effort 1 Cryomodule Interface Definition (FNAL-GDE-Meeting) N. Ohuchi.

1 K.Jensch, D.Kostin, DESY - Cryomodule components List S1 – DESY parts DESY parts for the S1 Cavity-String.

Definition of Work Area H. Hayano, KEK EDR-KOM-cavity at DESY Issues of Cavity and Cavity Package, Work Package discussion.

 =1 cavity: parameters Dimensions for cavity fabrication before any chemical polishing and at room Temp. outer ½ cell pick-up side inner ½ cells outer.

Carlo Pagani University of Milano INFN Milano-LASA & GDE ILC and XFEL Cryomodules Preliminary thoughts for convergence ILC EDR Kick-off Meeting DESY,

Alignment and assembling of the cryomodule Yun He, James Sears, Matthias Liepe.

Cryostat & LHC Tunnel Slava Yakovlev on behalf of the FNAL team: Nikolay Solyak, Tom Peterson, Ivan Gonin, and Timergali Khabibouline The 6 th LHC-CC webex.

Check the component list with FNAL solid model Norihito Ohuchi 2009/8/251 19th Biweekly Webex meeting (S1-G, Cryomodule, Cryogenics)

Detail plan of S1-Global H. Hayano (KEK),

Date 2007/Sept./12-14 EDR kick-off-meeting Global Design Effort 1 Cryomodule Interface definition N. Ohuchi.

Lutz Lilje XFEL Coupler Some Comments. XFEL Coupler WEBEX Lutz Lilje DESY Status TTF III Coupler  has shown full ILC performance  has not.

5 K Shield Study of STF Cryomodule (up-dated) Norihito Ohuchi KEK 2008/4/21-251FNAL-SCRF-Meeting.

ALCPG/GDE Meeting FNAL Global Design Effort 1 Cavity Specification Table 23 Oct 2007 FNAL Lutz Lilje DESY.

S1-Global status report KEK Norihito Ohuchi 2008/11/171ILC08-GDE-Meeting-Chicago.

Overview of Main Linac Cryomodule (MLC) Yun HE MLC Internal Review 9/5/2012Yun HE, MLC Internal Review1.

Plug compatibility discussion TILC09 cavity integration session H. Hayano.

LCLS-II Button-type BPM (Review) Nikolay Solyak Review, FNAL, Dec. 12, 2014.

Visiting DESY for S1-G module Norihito Ohuchi 2009/8/251 19th Biweekly Webex meeting (S1-G, Cryomodule, Cryogenics)

Reliability of SNS Superconducting Linac April 12, 2011 Jeff Saunders SNS/ORNL.

Ralf Eichhorn CLASSE, Cornell University. I will not talk about: Cavities (Nick and Sam did this) HOM absorbers (did that yesterday) Power couplers (see.

5K shield removal experiment in STF cryomodule Norihito Ohuchi 2008/11/181ILC08-GDE-Meeting (CHICAGO)

Extra / Discussion Slides. 2 1.Helium Top Fill Port Add extra CF/ISO flange as collar so that the weld-region is not disturbed 2.Helium bottom FillCF.

Shuichi NoguchiTTC Meeting at Milano, Injector Cryomodule for cERL at KEK Cavity 2 Prototypes were tested. Input Coupler 2 Couplers were tested.

Prototype Cryomodule FDR Ken Premo 21 – 22 January 2015 High Power Coupler Design.

LCLS-II Prototype Cryomodule Darryl Orris 21 January 2015 Final Design Review: Instrumentation.

Eiji Kako (KEK, Japan)TTC at Cornell, 2013 June 13 1 HOM absorbers; KEK HOM couplers in injector Eiji Kako (KEK, Japan)

S1G Experiment Schedule Plan

TDR guideline discussion on Cavity Integration

MICE Meeting at RAL, Oct-23, 2005

Meeting for S1-Global module design Cryomodule and Cryogenics

Norihito Ohuchi – KEK (presented by P. Pierini - INFN)

Sensors in the S1-G Cryomodules (Updated )

TTC Topical Workshop on SRF Cryomodule Clean Room Assembly

S1-G cryomodule assembly status

Definition of work flow for string DESY Example on critical operation

S1-G Webex meeting Global Design Effort

5K Shield Study & HL Measurements

Summary of the checking items of the Module-C design

Alignment of Main Linac Cryomodule (MLC)

SNS PPU Cryomodule Instrumentation

CEPC-650MHz Cavity Cryomodule

SNS PPU Cryomodule Instrumentation

Presentation transcript:

Signal port flange and beam pipe Norihito Ohuchi 2009/10/27122nd S1-G Webex meeting

Signal cable assignment on A and B flanges 2009/10/2722nd S1-G Webex meeting2 Original design of signal cables for A and B flanges A flange 2 ×Piezo 4 ×WPMs B flange 2×e‐pickup coupler 2 ×cavity HOM 1 ×cavity pickup 2 ×PT1000 coupler 1 ×STC He vessel D flange Stepping motor, BPM, Piezo vibration sensors Signal cables from cavities for S1-G Module-C A flange 2 ×Piezo B flange 2 × e‐pickup coupler 2 ×cavity HOM 1 ×cavity pickup D flange Stepping motor Signals for WPMs and temperature sensors go through the KEK terminal ports.

2009/10/27322nd S1-G Webex meeting A-flange 2 ×Piezo No use

2009/10/27422nd S1-G Webex meeting B-flange cavity Pickup cavity HOM1 cavity HOM2 spare e‐pickup coupler No use

2009/10/27522nd S1-G Webex meeting Stepping motors D-flange No use

D-flange location 2009/10/2722nd S1-G Webex meeting6 Upper side WPMs and D-flange Temperature sensors, strain gauges, pin diodes

Feedthroughs (From data of #M9) 2009/10/2722nd S1-G Webex meeting7

Confirmation for feedthroughs 1.Assignment of the cables to the A and B flanges is basically same as the #M9. – #M9 is the module which DESY sent to FNAL as CM1. – However, the cables for WPMs and temperature sensors go out via the KEK terminal ports. 2.D-flange locates at the downstream of Module-C. – The cable lengths are same as the #M9 including the stepping motors. 3.The machine process of the A, B and D flanges – The blind A and B flanges will be sent to KEK with Module-C components from INFN/Zanon. – Proposal: the flanges would be machine-processed by FNAL or DESY, and be checked with feedthroughs for leak tightness. 2009/10/2722nd S1-G Webex meeting8

Beam pipe between gate valve and FNAL cavity 2009/10/2722nd S1-G Webex meeting9 FNAL cavity : fixed flange KEK gate valve : rotatable flange KEK cavity group will prepare this components. For checking leak tightness, the group needs the hexagon seals and the blind flange.