SERVICE CENTER FACILITIES

SERVICE CENTER FACILITIES 2 CUT-TO-LENGTH LINES SLITTING LINE POLISHING LINE FOR COILS POLISHING LINE FOR SHEETS 2 LASER CUTTING MACHINES SHEAR 2 POLISHING LINES FOR ROUND TUBES POLISHING LINE FOR SQUARE AND RECTANGULAR TUBES

CUT-TO-LENGTH LINE – No 1 December 2005 COILS THICKNESS: 0.3- 3.0 mm WIDTH: 380-1600 mm WEIGHT: max 25 T MILL EDGE SHEETS LENGTH: 400- 6700 mm WIDTH CORRECTION TOLERANCES: EN ISO 9445 – for cold rolled sheets, EN ISO 9444 – for hot rolled sheets

CUT-TO-LENGTH LINE – No 2 June 2012 SHEETS LENGTH: 500 – 6,000 mm in “automatic mode” (automatic sheet discharge);    500 – 10,000 mm in “manual mode” (manual sheet discharge) TOLERANCES: EN ISO 9445 – for cold rolled sheets, EN ISO 9444 – for hot rolled sheets COILS THICKNESS: 1.0 – 10.0 mm WIDTH: 500 - 2150 mm WEIGHT: max 30 T no reduction of input coil width

SLITTING LINE COILS STRIPS thickness: 0.3- 4.0 mm width: 50 – 1600 mm FEBRUARY 2008 COILS thickness: 0.3- 4.0 mm width: 50 – 1600 mm inside diameter of a coil: 508 or 610 mm outside diameter of a coil: 2 000 mm STRIPS width - up to thickness 1.5 mm>18 mm; more than 1.5 mm>28 mm Outside and inside diameter – as above Tolerances – EN ISO 9445

POLISHING LINE FOR COILS APRIL 2009 WIDTH OF COILS – 300 -1600 mm WEIGHT OF A COIL – max 20 ton THICKNESS – 0.4 -2.0 mm SPEED OF WORK – 25 m/min SURFACE: dry brush, imitation of wet polish, duplo

POLISHING LINE FOR SHEETS August 2003 DRY PROCESSING MACHINERY 2 GRINDING HEADS 3 SCOTCH BRITE HEADS SHEET BY SHEET FEEDING SYSTEM SHEETS THICKNESS: 0.5- 4.0 mm LENGTH: 6000 mm WIDTH: 1600 mm GRIT: 80,120,180,240,320,400, DB

2 LASER CUTTING MACHINES 2D Trumpf MARCH 2010, FEBRUARY 2012 Thickness of sheets Stainless steel up to 15 mm Aluminium up to 10 mm Work table dimensions 1500 x 3000 mm Tolerance – EN ISO 9013

SHEAR LVD THICKNESS: 0.5 – 4.5 mm WIDTH: up to 3100 mm FEBRUARY 2013 THICKNESS: 0.5 – 4.5 mm WIDTH: up to 3100 mm LENGTH: up to 6000 mm TOLERANCES EN ISO 9445 – for cold rolled sheets, EN ISO 9444 – for hot rolled sheets

BENDING OF SHEETS LVD BENDING PRESS JANUARY 2015 LVD BENDING PRESS Bending of stainless steel and aluminium sheets with thickness up to 8 mm* Working length 3050 mm 220 tons pressing force 8-axis CNC positioning Laser bend angle measurement Table camber compensation CNC crowning High quality machine tooling for stainless steel/aluminium sheets *available depth thickness depends on overall workpiece dimensions

2 POLISHING LINES FOR ROUND TUBES June 2007 8 POLISHING HEADS DIAMETER OF TUBES - 10-168.3 mm SPEED UP TO 12 m/min

POLISHING LINE FOR SQUARE AND RECTANGULAR TUBES, FLATBARS GRIT: 80,120,180,240,320,400,600,800,1000 POLISHING SIZES SQUARE TUBES: from 20x20 to 120x120 mm RECTANGULAR TUBES: from 20x10 to 80x120 mm FLATBARS THICKNESS – 6-20 mm MAX WIDTH – 120 mm

Thank you for your attention