doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 1 IEEE aj Usage Models Document Date: Author(s)/contributors: (This will grow to reflect those providing explicit contributions / review comments of this document. Please let author know if any name is conspicuously missing from this list.)

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 2 Amendment to WFA VHT Usage Models for ad Submission for IEEE aj Nov meeting in San Antonio

doc.: IEEE /1145r1 Submission Introduction The purpose of this document is to serve as the Usage Model Document for the aj Task Group. This document is an amendment to Wi-Fi Alliance (WFA) Very High Throughput (VHT) usage models for ad. –Category 1 to 6 are WFA VHT usage models. –Category 7 is a ad usage model. –Category 8 and category 9 embrace five new usage models for aj. This document received the support from China Wireless Personal Area Network (CWPAN) Working Group. November 2012 Jiamin Chen, HuaweiSlide 3

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 4 Overview of WFA VHT usage models for ad Category#Usage Model 1.Wireless Display1aDesktop Storage & Display 1bProjection to TV or Projector in Conf Rom 1cIn room Gaming 1dStreaming from Camcorder to Display 1eBroadcast TV Field Pick Up 1fMedical Imaging Surgical Procedure Support 2.Distribution of HDTV2aLightly compressed video streaming around home 2bCompr. video steaming in a room/ t.o. home 2cIntra Large Vehicle (e.g. airplane ) Applications 2dWireless Networking for Small Office 2eRemote medical assistance 3.Rapid Upload / Download3aRapid Sync-n-Go file transfer 3bPicture by Picture viewing 3cAirplane docking 3dMovie Content Download to car 3ePolice / Surveillance Car Upload 4.Backhaul4aMulti-Media Mesh backhaul 4bPoint to Point backhaul 5.Outdoor Campus /Auditorium5aVideo demos / telepresence in Auditorium 5bPublic Safety Mesh 6.Manufacturing Floor6aManufacturing floor automation 7.Cordless computing7aWireless IO / Docking

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 5 Overview of the New aj Usage Models Category#Usage Model 8.Portable Device Applications8aPeer-to-Peer Communication Between Portable Devices 8bRapid Download Mass Data from Fixed Devices (e.g. Kiosk) 8cCloud Computing /Storage & Mass Data Synchronization 8dWireless Peripheral Application (e.g. HD Display, printer, etc.) 9.Wireless Networking9aAccess to Internet/intranet via Millimeter-Wave AP

doc.: IEEE /1145r1 Submission Terminology Usage Model – A usage model is the combination of all the below things; not to be confused with a use case which is the specific set of steps to accomplish a particular task. –Pre-Conditions – Initial conditions before the use case begins. –Application – A source and/or sink of wireless data that relates to a particular type of user activity. Examples are Streaming Video and Wireless Display. –Environment – The type of place in which a network is deployed, such as home, office, outdoor, public space, etc. –Traffic Conditions – General background traffic or interference that is expected while the use case steps are occurring. –Use case – A use case is task oriented. It describes the specific step by step actions performed by a user or device. November 2012 Jiamin Chen, HuaweiSlide 6

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 7 Category 8: Portable Device Applications Portable devices, e.g. smart phones, tablets and laptops, are powerful mini-computers. Portable devices users can utilize fragments of time for information searching, e- commerce, entertainment, photo /video sharing, and various applications anytime and anywhere. This category includes four usage models: 8a. Peer-to-Peer Communication Between Portable Devices 8b. Rapid Download Mass Data from Fixed Device (e.g. Kiosk) 8c. Cloud Computing /Storage & Mass Data Synchronization 8d. Wireless Peripheral Application (e.g. HD Display, printer, etc.)

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 8 Usage Model 8a: Peer-to-Peer Communication Between Portable Devices Traffic Conditions: Link between energy and/or power constrained portable devices may carry traffic with low power or/and low energy consumption requirement. Some with simply best-effort rates, others with low jitter and low latency requirements. There is typically no interference from other mm- wave links due to directional transmission and short link distance. Peer-to-peer link is typically symmetric and bidirectional. Use Case: 1.Users approximately align beam direction of the two portable devices toward each other. 2.Users complete secure pairing between two portable devices with minimal user configuration. 3.Users select and launch the desired application (e.g. sharing video/pictures, sync files, etc.) 4.When task is complete users exit the application. Pre-Conditions: Users have wireless connectivity between two portable devices (e.g. smart phone, tablet, laptop, camera, etc.). Application: Portable devices users can utilize fragments of time to share mass data such as video/audio, electronic map, picture, etc. with each other in seconds. The key metric is the user’s time spent to do a transfer. Less than 1 minute is acceptable. 1-5 minutes may be acceptable. More than 5 minutes may not be acceptable, especially when portable devices are held in users’ hand. Wireless connective between two portable devices for bidirectional controller data of interactive game requirements are: jitter is less than 15 msec, delay is less than 15 msec. Environment: Environments can be highly variable; e.g. crowded public space, a single home or a dense office, etc. The antenna size, energy and/or power are constrained for some portable devices (e.g. smart phones).Therefore, peer-to- peer link distance between these devices may typically be 3m. Transmissions are Line Of Sight. All devices will typically be stationary during usage.

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 9 Usage Model 8b: Rapid Download Mass Data from Fixed Devices Traffic Conditions: Traffic is asymmetric: high data rate from fixed device to portable device, and low data rate reverse link. More than one portable device can access to an fixed device simultaneously. Usually, multiple links and data streams are transmitting with simply best- effort rates. There is typically no interference from other mm- wave links due to directional transmission and spatial reuse. Use Case: 1.User approximately aligns beam direction of the portable device toward the fixed device antenna. 2.User completes secure pairing between the two devices with minimal user configuration. 3.User selects and downloads the desired mass data (e.g. video/pictures, data files, etc.). 4.When task is complete user exits the application. Pre-Conditions: User has wireless connectivity between a portable device and a fixed device(e.g. kiosk, PC, etc.). Application: Users can download mass data (e.g. HD movie, TV play/news/ entertainment video or audio, picture library etc.) to their portable devices from kiosks (or PCs) deployed at public crowded spaces for mass data cache, to reduce data traffic overload on backbone network. The key metric is the user’s time spent to do a transfer. Less than 1 minute is acceptable. 1-5 minutes may be acceptable. More than 5 minutes may not be acceptable. Environment: Environments can be variable; e.g. crowded public space such as railway stations, airports, shopping mall, or home,office. Fixed devices can adopt phased array antenna with more array element, then the beam can be narrow, and signal transmission range can be larger. Hence, link distance can typically be 3-5m or more. Typically transmissions are Line of Sight. All devices will typically be stationary during usage.

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 10 Usage Model 8c: Cloud Computing /Storage & Mass Data Synchronization Traffic Conditions: Uplink from energy and/or power constrained portable device to server may carry traffic with low power or/and low energy consumption requirement(s). Usually with simply best-effort rates. There is typically no interference from other mm-wave links due to directional transmission and spatial reuse. Point-to-point link can be symmetric(cloud computing) or asymmetric(mass data synchronization). Use Case: 1.User approximately aligns beam direction of the portable device toward the antenna of server/PC. 2.User completes secure pairing between the two devices with minimal user configuration. 3.User select and launch the desired application (e.g. cloud computing, etc.). 4.When task is complete user exits the application. Pre-Conditions: User has wireless connectivity between portable device and cloud computing server or backup server or PC etc. Application: Portable devices can be wirelessly connected to cloud computing server to transfer heavy cloud traffic or to synchronize mass data to/from backup server. Since cellular networks have relatively expensive data plan and lower data rate than LAN, mass data can be uploaded from portable device to a PC or a laptop for cache with very high data rate, and then be sent to the cloud server via wired or wireless local area network. Users can enjoy very high data rate when downloading mass data from the server to portable devices. During this procedure, cache based on PC or laptop shall be used when necessary. Environment: Environment can be home, office, manufacturing floor, etc. Link distance can typically be 3-5m, which depends on the capacity of device. Transmissions are Line Of Sight. All devices will typically be stationary during usage.

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 11 Usage Model 8d: Wireless Peripheral Application Traffic Conditions: Some with simply best-effort rates (storage etc.), while others with QoS requirements (video, etc.) There is typically no interference from other mm- wave links due to directional transmission and spatial reuse. Point-to-point link will be symmetric or asymmetric, bidirectional or unidirectional. Use Case: 1.User aligns beam direction of the portable device to the antenna of peripheral. 2.User completes secure pairing between the portable device and peripheral with minimal user configuration. 3.User select and launch the desired peripheral application with the utilization of wireless technology. 4.When task is complete user exits the application. Pre-Conditions: User has wireless connectivity between portable devices and peripherals such as HD displays, projectors, printers, DVDs, etc. Application: Portable devices can be wirelessly connected to peripherals instead of traditional cable connection, e.g., enabling portable device to wirelessly display movie or picture to display devices such as HD-TV/projector, or to print files/pictures wirelessly, etc. Peripherals include but are not limited to, storages (DAS/NAS), displays, printers, scanners, wireless dockings, DVD’s, HD players, STBs. Environment: Environment can be home, office, manufacturing floor, etc. Fixed peripherals can adopt high performance phased array antenna. Hence, link distance between portable device and fixed peripherals can be 3-5m or more, which is determined by the performance of devices. Usually one portable device shall connect to only one peripheral simultaneously. All devices will typically be stationary during usage.

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 12 Category 9: Wireless Networking One or more End-Devices (fixed or portable) can be wirelessly connected to an AP (access point) to access internet/intranet or general data network in home or office with the utilization of millimeter-wave communication technology. Multiple links and data streams may require varying QoS and throughput. This category includes one usage model: 9a. Access to Internet/Intranet via Millimeter-Wave AP

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 13 Usage Model 9a: Access to Internet/Intranet via Millimeter-Wave AP Traffic Conditions: One or more End-Devices can access to an AP to form a service set. Multiple links and data streams with varying QoS, reliability, and throughput requirements, some with simply best-effort rates (downloading), others with QoS requirements(video, VoIP, etc.) Link from energy and/or power constrained portable devices to AP may carry traffic with low power/energy- consumption requirement. There is typically no interference from other mm-wave links due to directional transmission and spatial reuse. Use Case: 1.User approximately aligns beam direction of the End- Device to the antenna of AP. 2.User completes secure pairing between the End- Device and AP. 3.User commences to surf the internet/intranet or launch the desired application at different time with the utilization of mm-wave communication technology. 4.When task is complete user exits the application or disconnects from AP. Pre-Conditions: User has operational WLAN network for internet or intranet access. User has wireless connectivity between End-Device (fixed or portable) and millimeter-wave AP. Application: End-Device can be wirelessly connected to an AP for internet/intranet accessing or general data networking. User can wirelessly surf the internet/intranet for business or for entertainment such as collect/send , search for information, do e-commerce, update personal website, watch news/video, etc. Multiple applications may run at the same time. Environment: Environment can be highly variable, e.g. crowded public place, a single home or a dense office, air plane, high-speed train etc. Link distance between End-Device and AP depends on their performance. A ceiling installation for AP is strongly recommended since mm- wave links might not be easily blocked by obstacles such as furniture, human body on the floor. Transmissions are LOS or NLOS. All devices will be typically stationary during usage.

doc.: IEEE /1145r1 Submission November 2012 Jiamin Chen, HuaweiSlide 14 References liaison-from-wi-fi-alliance-to regarding-wfa-vht-study-group-consolidation-of- usage-models ad-tgad-usage-model.ppt ac ac-usage-model-document.ppt ad-implications-of-usage-models-on-tgad-network-architecture.ppt c-mmwave c-usage-model-document.doc n-usage-models.doc cmmw-ieee cmmw-sg-par.doc cmmw-ieee cmww-sg-5c.doc