G64INC Introduction to Network Communications Ho Sooi Hock Internet Protocol

Outline Internetworking IP Addressing Hierarchy Classful vs. Classless Addressing Special IP Addresses IP Datagrams Fragmentation

Internetworking Existence of multiple network technologies today A need to interconnect heterogeneous networks to form single internet –hardware: routers connect different physical networks –protocol software: give the illusion that there is a single virtual (logical) network providing universal service

Internetworking Protocols The TCP/IP Reference Model –begun in the 1970s –the Internet has emerged into the public domain in the 1990s –controlled by the Internet Engineering Task Force (IETF) TCP/IP used the term host computer to refer to any system that connects to an Internet running applications Both hosts and routers use TCP/IP protocol software Internet Reference Model

Directed Reading Open Systems Interconnect Reference Model (OSIRM) –Chapter 1: Introduction and Overview 1.6 to 1.9

Message Transmission Example

Position of IP in TCP/IP Protocol Suite

The IP Address Hierarchy Every host is assigned a globally unique 32-bit address for identification Each 32-bit address is divided into two distinct parts –prefix: physical network to which a host is attached, also known as network number –suffix: a host attached to a given physical network, also known as host number Prefixes are coordinated globally and suffixes locally. Hence the former is unique but the latter can be duplicated

Classes of IP Address Size of prefix and suffix determines maximum number of networks and maximum number of hosts per network respectively IP defines different classes of address with different sized prefixes and suffixes The first four bits of the address specify the address class

The Five Classes of IP Address

Division of the Address Space Public Internet network numbers are assigned by Internet Service Providers (ISPs) and these are coordinated by the Internet Assigned Number Authority

Default Masks for Classful Addressing An Addressing Example

Routers and IP Addressing Routers are assigned two or more IP addresses So are multi-homed computers

Special IP Addresses

Example of this host on this address

Network Addresses

Example of Direct Broadcast Address

Example of Limited Broadcast Address

Example of Loopback Address

CIDR Notation A large part of available addresses were wasted due to the use of classful addresses Classless addressing, known as CIDR (Classless Interdomain Routing) was adopted Network suffix can be any number of bits long, rather being constrained to 8, 16 or 24 bits CIDRized network address has the dotted decimal form a.b.c.d/x. x defines the number of mask bits and a.b.c.d is the first address in the block (by setting 32-x bits to 0s) More efficient allocation of IP addresses

IP Datagrams Data are transmitted in small units called packets, with header added containing control information, e.g. addresses, data length etc. Internet protocols define a universal virtual packet – the IP datagram IP datagrams are switched across multiple physical networks via routers IP datagram can be at most 64K octets, including header and data

IP Datagram Header Format TTL field used to prevent looping datagrams and used for tracing routes

Protocol Field and Encapsulated Data Examples of Protocol Values

Routers and Routing Tables Each router forwards IP datagrams by matching the destination IP address of the IP header to entries in a local routing table Each entry consists of: –destination address –subnet mask 32 bit value that specifies the boundary between network prefix and suffix –next hop IP address of a router or hardware interface that allows direct delivery

Example Routing Table

Binding Protocol Addresses An Internet packet passes through a series of routers –each hop takes it over a particular network, either to a specific computer on that network or to the next router –in either case, the sending host or router has to map between the protocol (IP) address and a hardware address –this is known as address resolution

Address Resolution Protocol TCP/IP defines the Address Resolution Protocol (ARP) which defines the format of resolution requests and responses This technique is usually combined with local caching of hardware addresses

Frame Encapsulation Protocols –TCP – end to end, identification by port numbers –IP – host to host, identification by IP addresses –Network Interface (Link Layer) – hop to hop (link to link), identification by MAC addresses

MTU and Datagram Size Maximum Transmission Unit –maximum-sized packet that can be carried on a given physical network IP datagrams may have to cope with different MTU sizes as it passes over an internet

Fragmentation A datagram that is larger than MTU will be fragmented into smaller fragments Each datagram contains a fragment Header fields indicate when the data is a fragment and also where it belongs –identification, flags and fragment offset MTUs for Some Networks

Fragmentation Example Reassembly done at the final host only –routers require less state information –fragments can take different routes Whole datagram is lost if any fragment lost

Best Effort Delivery Connectionless Service IP attempts best effort delivery and does not guarantee to deal with: –datagram duplication –delayed or out of order delivery –corruption of data –datagram loss These issues are dealt with by the next higher transport protocol i.e., TCP (Transmission Control Protocol)

Acknowledgements Most lecture slides used in this presentation are adopted from the same module taught in Nottingham, UK Campus, with addition of diagrams from the recommended texts by Douglas E. Comer and A. Forouzan.