Laboratory exercise Puu-0.3130 Instrumental analysis in surface, polymer and nanoscience Lokanathan Arcot 2nd March 2015
Outline Chronology of the laboratory works Each step in detail General issues Writing the report
Chronology Students are divided in groups consisting of two persons Each group receives one sample List of samples Chitosan Xylan (from birch wood) Cellulose triacetate (DS 3) Cellulose acetate (DS 2.5) Carboxymethyl cellulose (DS 0.9) Carboxymethyl cellulose (DS 1.2) Pectin Guar gum Methyl cellulose Hydroxyethyl cellulose ethoxyate (quaternized) Cationic starch (DS 0.75) Hydroxypropyl cellulose
(morphology/thickness) Sample Analysis NMR (30 min) Sample identification (meeting) (2h) Sample identification (~4h) IR (45 min) Raman (30 min) Find out a solvent for your sample (~1 h) AFM (morphology/thickness) (4h) XPS (chemical analysis) (2 h) Make a solution and spin coat ultrathin films (1.5 h)
Chronology IR (3rd and 5th March) Experimental Exercise ( Total 8 groups) 6 groups with 3 students each; 2 groups of 2 students each ) IR (3rd and 5th March) Raman (4th March) Sample Identification (6th March) Sample dissolution (10,11th of March) Spin Coating (12,13 of March) AFM (16,17,18,19,20,24,25,26 March) XPS NMR (2,8,9 April) * QCM-D, SPR (Demo only) (23 and 27 March)
Infrared (IR) spectroscopy Sample form – Powder (KBr pellet preparation) Samples will be analyzed with photoacoustic IR Location: PUU 1 Samples must be dry before the measurement (should be placed in the oven in the IR room) Contact person (Depending on date) Meeting place room 234 PUU 1 3rd March timo.paakkonen@aalto.fi and saija.vaisanen@aalto.fi 5th March iina.solala@aalto.fi
Raman spectroscopy Sample form – Powder (Direct measurement) Samples will be analyzed with confocal and UV raman Time allocated for each group: 15 min Location: room 303 in PUU2 Contact person: Leonardo Galvis Rojas (leonardo.galvisrojas@aalto.fi)
Meeting on sample identification IR data should be utilized to identify which sample your group has Search for literature on IR spectra on polysaccharides to compare with your spectra A meeting is scheduled where each group presents their spectra and proposes the identity of their sample (with argumentation) Location: PUU1, room 311 Contact person: Lokanathan Arcot
Dissolution and spin coating After the identifying the sample, each group must find out what is a suitable solvent for their sample Each group must come up with a proposition for a suitable solvent before entering the exercise dealing with dissolution and spin coating The sample will be dissolved in a suitable solvent for spin coating Furthermore, the sample will be dissolved in a deuterated suitable solvent for NMR analysis Total 2 solutions – 50 mL 10g/ml normal solvent 200 mg in 1 ml deutrated solvent Films of four different thicknesses will be cast by spin coating from solutions of four different concentrations (10, 5, 2.5 and 1 g/l) Duration: 1h 30 min Location: room 339 in PUU1 Contact person: elina.niinivaara@aalto.fi (For Sample dissolution) maija.vuoriluoto@aalto.fi (For Spin coating)
Atomic Force Microscopy (AFM) The morphology of spin coated ultrathin films will be characterized with AFM The thickness of the ultrathin films will be determined by scratching the sample and measuring the height difference in the scratch with AFM Time allocated for each group: 4 hours Location: PUU1, room 336 (wait outside until escorted inside) Contact person: tero.kamarainen@aalto.fi
X-ray Photoelectron Spectroscopy (XPS) The chemical nature of the spin coated ultrathin films will be probed with XPS (Used the spin coated sample with 10g/l sample concentration, the same sample used for AFM) This is a demonstration: the measurements are so long that you cannot follow them in real time The results will be emailed to you shortly after the demonstrations Contact person: Leena-Sisko Johansson (leena-sisko.johansson@aalto.fi; phone: 050 555 2608) Meeting point – Room 318, PUU 1
Nuclear Magnetic Resonance (NMR) The sample dissolved in a suitable deuterated solvent will be analyzed by NMR spectroscopy Time allocated for each group: 45 min Place: Chemistry Department, room D238b Contact person: Reeta Salminen (reeta.salminen@aalto.fi; phone: 050 344 1730)
General issues Please carry a memory stick throughout the exercises; it is handy for data collection If you cannot find a suitable time for your group, please contact the contact person of the relevant exercise
Laboratory report Each group hands in a laboratory report Detailed instructions on how to construct the report will appear shortly in Noppa Deadline for the report: 25th May 2015 Submission through email to Lokanathan Arcot lokanathan.arcot@aalto.fi All reports will be automatically checked for plagiarism
What happens now? Form the groups (three persons each) Take your samples Book the times for each exercise Let’s move to the IR lab to get your samples dehydrated overnight