How to setup VRT- 402N with VRT-401/311S?

Outline  Connections Topology  VRT-402N setup  VRT-401 setup

Connection Topology Tunneling

VRT-402 Setup  In Security – VPN/ ISEC Add New Policy Key in VRT-401’s WAN IP Address Key in VRT-401’s LAN IP Subnet and the netmask Key in the pre-share key, example on “12….0” Select the rest configuration where should match to VRT-401. Confirm the settings Save Settings!!

 In VPN -> VPN Polices VRT-401 Setup - 1/2 Add a new Policy Key in VRT-402N’s WAN port IP Address. Key in the local IP subnet and mask of VRT-401 Key in the remote IP subnet and mask. I.e. VRT-402N’s subnet Select phase 1 encryption Select phase 2 encryption & key in the pre- share key Select phase 1, 2 PFS group Save the configuration

VRT-401 Setup - 2/2  In VPN -> VPN Status Check the VPN status. Here shows the success status

Hint  At VRT-401 –You can check the log to see the information, if you encounter some connection issues.  Connection fail –For most of the time, IF you failed in the connection, it could be IP setup issues. Please do check: –Have you key in the correct WAN IP for both ends. –Have you key in the correct IP Subnet for both ends. –Have you choose the correct Encryption for both ends. Say, Phase 1, phase 2.  This example also applies to: –VRT-311S