INDUSTRIAL MATERIALS Instructed by: Dr. Sajid Zaidi PhD in Advanced Mechanics, UTC, France MS in Advanced Mechanics, UTC, France B.Sc. in Mechanical Engineering,

Slides:



Advertisements
Similar presentations
Ferrous Metallurgy: The Chemistry and Structure of Iron and Steel
Advertisements

Metals and Alloys. Alloys Two definitions Combination of two or more elements Combination of two or more metallic elements Metallurgical Commercial.
METALS Learning Objectives: What is METAL?
GOVERNMENT COLLEGE OF ENGINEERING, SALEM.
Production Technology (IND 006) Preparatory Year, Faculty of Engineering, Fayoum University Dr. Ahmed Salah Abou Taleb Lecturer, Industrial Engineering.
UNIT 3: Metal Alloys Unit 3 Copyright © 2012 MDIS. All rights reserved. 1 Manufacturing Engineering.
Characteristics of Metals AG 221 – Metals and Welding.
Chapter 11 Part 2 Metals and Alloys.
INTRODUCTION TO METALS
Unit 2 Manufacturing Materials Ch 3-5 R. Thomas Wright.
METALS What is METAL? Different Types of Metals – Ferrous, Non-Ferrous, Alloys Main focus of Ferrous Metals Properties of Metals Characteristics of Ferrous.
NC State University Department of Materials Science and Engineering1 MSE 440/540: Processing of Metallic Materials Instructors: Yuntian Zhu/Suveen Mathaudhu.
Properties and Applications
Chapter 5 Ferrous Alloys.
Section 3.3 Ferrous and Nonferrous Metals
Stainless Steels Stainless steels are iron base alloys that contain a minimum of approximately 12% Cr, the amount needed to prevent the formation of rust.
Conceptual Designs. Most Commonly used Metals Plain carbon steels –Available in all structural forms, thin sheets, coated or uncoated, cold formed, hot.
CAST IRON JIGAR RAKHOLIYA PRATIK VALANI SATISH HAPANI NIRAV MULANI.
Metals Part 2 Manufacturing Processes, MET 1311 Dr Simin Nasseri
TYPES OF METALS.
Bachelor of Technology Mechanical
Annealing Processes All the structural changes obtained by hardening and tempering may be eliminated by annealing. to relieve stresses to increase softness,
PALESTINE UNIVERSITY BUILDING MATERIAL chapter No.#4 Steel.
Steel Haseeb Ullah Khan Jatoi Department of Chemical Engineering
INDUSTRIAL MATERIALS Instructed by: Dr. Sajid Zaidi
By Usanee thanawutsakunchai Sasichai jaithum
Metal Alloys Manufacturing Processes © 2013 Su-Jin Kim, GNU Nonferrous Alloys ( 비철금속 ) More expensive than ferrous metals. Applications: aluminium for.
Metals. In the Construction Industry we use metals in the many areas such as; Structural Claddings Architectural Systems Building Service.
Agricultural Mechanics CD Identifying Metals and Their Physical Properties Lesson A5–1.
Nonferrous Metals and Alloys
1 Subject: Composite Materials Science and Engineering Subject code: Prof C. H. XU School of Materials Science and Engineering Henan University.
Chapter 9 Characteristics of Metallic Materials. Objectives Four major classifications – ferrous,non ferrous, high temperature super alloy, and refractories.
Classification of Metals
WHAT ARE METALS Learning Objectives: Defining METAL?
Metallic Materials.  Types of metallic Materials * Aluminum * Brass * Bronze * Stainless Steel * Carbon Steel * Copper.
B. Titanium-based Alloys Titanium is hcp at room temperature – and transform to the bcc structure on heating to 883 o C. Alloying elements are added to.
Steel Stainless Steel Cast Iron Copper/Brass Aluminum
Steel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore.
EBB113 METALS ALLOYS. Metal Alloys Ferrous SteelCast Iron Low AlloyHigh Alloy Non Ferrous Fe 3 C cementite
Metal Alloys Formation
Cast Irons Engr. Waqas Javaid WEC.
Numbering and Classification of Non-ferrous metals
HEAT TREATMENT OF STEEL
1 Teaching Innovation - Entrepreneurial - Global The Centre for Technology enabled Teaching & Learning, N Y S S, India DTEL DTEL (Department for Technology.
Name : Mr. Krutik J Patel Enrollment no. : Cast Iron Guided By : Mr.Umang Patel Material Science and Metallurgy Department : Mechanical [B]
Metal Properties and Processes Design and Manufacture.
Metals can be either ferrous or non-ferrous. Ferrous metals contain iron while non-ferrous metals do not.Metals can be either ferrous or non-ferrous.
Metal Types. Objectives Know the types of metals and examples of them Know the types of metals and examples of them.
Mr. A Roberts GCSE Resistant Materials Materials and their Uses - Metal.
Introduction to nonferrous metal and alloys
Physical Metallurgy EBB222 Stainless steel.
DR KAFEEL AHMED Cast iron Properties 1.Strength 2.Hardness 3.Brittleness 4.Stiffness Depends upon 1.Alloying elements 2.Annealing.
GENERAL CONSIDERATION IN DESIGN OF MACHINE ELEMENTS
Ferrous Metals Neotech Institute of Technology Vadodara.
Presentation on Cast Iron Material Science and Metallurgy ( ) Guided by Mr. Pankaj Sharma Submitted by: ( )/3 rd ME A ( )/3.
Materials. Metal Metals are chemical elements that are good conductors of electricity and heat. Metals are extracted from mineral ores. Metals with high.
Nonferrous Metals & Alloys. Nonferrous Metals Ferrous Alloys – alloys contain iron Nonferrous Metals – metals do not contain iron such as Copper (Cu),
1 UNIT – III Ferrous and Non Ferrous Alloys. 2 3 Pure Metals and Alloys Metal that are not mixed with any other materials are known as pure metals. Metals.
MSE 440/540: Processing of Metallic Materials
Characteristics of Metals
FERROUS AND NON FERROUS ALLOYS
DEPARTMENT OF MECHANICAL AND MANUFACTURING ENGINEERING
What is cast iron? Alloys of iron and carbon with more than 2.11% carbon are called cast irons.
FERROUS AND NON FERROUS ALLOYS
Heat treatment of steel
Chapter 2 Material and Manufacturing Properties
Chapter 6: Metals & alloys Part 2
Four Types of Engineering Materials
CLASSIFICATION OF ENGINEERING MATERIALS
CHAPTER 9 Engineering Alloys 1.
Presentation transcript:

INDUSTRIAL MATERIALS Instructed by: Dr. Sajid Zaidi PhD in Advanced Mechanics, UTC, France MS in Advanced Mechanics, UTC, France B.Sc. in Mechanical Engineering, UET, Lahore B.TECH Mechanical Technology IQRA COLLEGE OF TECHNOLOGY (ICT) INTERNATIONAL ISLAMIC UNIVERSITY, ISLAMABAD

Classification of Ferrous Alloys Plain Carbon Steel ◦ Plain Carbon steel contains up to 2.14% of Carbon ◦ These steels may also contain other elements, such as Si (maximum 0.6%), copper (up to 0.6%), and Mn (up to 1.65%). Alloy Steel ◦ Alloy steels are compositions that contain more significant levels of alloying elements. Cast Iron ◦ Cast Iron contains 2.14 % to 6.70 % of Carbon. INDUSTRIAL MATERIALS Ferrous Alloys

Classification of Ferrous Alloys SteelCast Iron INDUSTRIAL MATERIALS Ferrous Alloys

Plain Carbon Steel Decarburized steels contain less than 0.005% C. Ultra-low carbon steels contain a maximum of 0.03% carbon. They also contain very low levels of other elements such as Si and Mn. Low-carbon steels contain 0.04 to 0.15% carbon. These are used for making car bodies and hundreds of other applications. Mild steel contains 0.15 to 0.3% carbon. This steel is used in buildings, bridges, piping, etc. Medium-carbon steels contain 0.3 to 0.6% carbon. These are used in making machinery, tractors, mining equipment, etc. High-carbon steels contain above 0.6% carbon. These are used in making springs, railroad car wheels, etc. INDUSTRIAL MATERIALS Ferrous Alloys

Plain Carbon Steel Steel can be defined as an Iron alloy which transforms to Austenite on heating. A plain-carbon steels has no other major alloying element beside carbon. When a plain-carbon steel is slowly cooled from the Austenitic range it undergoes the eutectoid transformation. INDUSTRIAL MATERIALS Ferrous Alloys

Alloy Steel Alloy steels are compositions that contain more significant levels of alloying elements. Alloying elements are added to steels ◦ To provide solid-solution strengthening of ferrite, ◦ To cause the precipitation of alloy carbides rather than that of Fe 3 C, ◦ To improve corrosion resistance and other special characteristics of the steel, and ◦ To improve hardenability. The AISI defines alloy steels as steels that exceed in one or more of these elements: ≥ 1.65% Mn, 0.6% Si, 0.6% Cu. The total carbon content is up to 1% and the total alloying elements content is below 5%. INDUSTRIAL MATERIALS Ferrous Alloys

Alloy Steel A material is also an alloy steel if a definite concentration of alloying elements, such as Ni, Cr, Mo, Ti, etc., is specified. These steels are used for making tools (hammers, chisels, etc.) and also in making parts such as axles, shafts, and gears. These are used in making springs, railroad car wheels, etc. Silicon, chromium, molybdenum, and vanadium are ferrite stabilizing elements whereas manganese and nickel are austenite stabilizers. Certain specialty steels may consist of higher levels of sulfur (>0.1%) or lead (0.15–0.35%) to provide machinability. These, however, can not be welded easily. Recently, researchers have developed ‘‘green steel’’ in which lead, an environmental toxin, was replaced with tin (Sn) and/or antimony (Sb). INDUSTRIAL MATERIALS Ferrous Alloys

Alloy Steel - Stainless Steel Stainless steels are selected for their excellent resistance to corrosion. All true stainless steels contain a minimum of about 11% Cr, which permits a thin, protective surface layer of chromium oxide to form when the steel is exposed to oxygen. The chromium is what makes stainless steels stainless. Chromium is also a ferrite stabilizing element. It causes the austenite region to shrink, while the ferrite region increases in size. For high-chromium, low-carbon compositions, ferrite is present as a single phase up to the solidus temperature. There are several categories of stainless steels based on crystal structure and strengthening mechanism. INDUSTRIAL MATERIALS Ferrous Alloys

Cast Iron Cast irons are iron-carbon-silicon alloys, typically containing 2.14 to 4% C and 0.5–3% Si. They pass through the eutectic reaction during solidification. In cast irons, silicon is the catalyzing agent that allows free carbon (graphite) to appear in the microstructure by breaking down the cementide to iron and carbon. Silicon, therefore, is a graphite stabilizing element. Gray cast iron It contains small, interconnected graphite flakes that cause low strength and ductility. This is the most widely used cast iron and is named for the dull gray color of the fractured surface. Higher strengths are obtained by reducing the carbon equivalent, by alloying, or by heat treatment. INDUSTRIAL MATERIALS Ferrous Alloys

Cast Iron Gray iron has a number of attractive properties, including high compressive strength, good machinability, good resistance to sliding wear, good resistance to thermal fatigue, good thermal conductivity, and good vibration damping. White cast iron It is a hard, brittle alloy containing massive amounts of Fe 3 C. A fractured surface of this material appears white. A group of highly alloyed white irons are used for their hardness and resistance to abrasive wear. Elements such as chromium, nickel, and molybdenum are added. Malleable cast iron It is formed by the heat treatment of white cast iron, produces rounded clumps of graphite. INDUSTRIAL MATERIALS Ferrous Alloys

Cast Iron It exhibits better ductility than gray or white cast irons. It is also very machinable. It is produced by heat treating unalloyed 3% carbon equivalent (2.5% C, 1.5% Si) white iron. Ductile (or nodular) cast iron Ductile iron is produced by treating liquid iron with a carbon equivalent of near 4.3% with magnesium. Compared with gray iron, ductile cast iron has excellent strength and ductility. Due to the higher silicon content (typically around 2.4%) in ductile irons compared with 1.5% Si in malleable irons, the ductile irons are stronger but not as tough as malleable irons. INDUSTRIAL MATERIALS Ferrous Alloys

Non-Ferrous Alloys Nonferrous alloys (i.e., alloys of elements other than iron) include, but are not limited to, alloys based on aluminum, copper, nickel, cobalt, zinc, precious metals (such as Pt, Au, Ag, Pd), and other metals (e.g., Nb, Ta, W). Comparison of Steel and some non-ferrous metals INDUSTRIAL MATERIALS Non-Ferrous Alloys

Aluminum Alloys General Properties and Uses of Aluminium Aluminum has a density of 2.70 g/cm 3, or one-third the density of steel, and a modulus of elasticity of MPa. Aluminum alloys have lower tensile properties compared with those of steel, their specific strength (or strength-to- weight ratio) is excellent. Aluminum can be formed easily, it has high thermal and electrical conductivity, and does not show a ductile-to-brittle transition at low temperatures. It is nontoxic and can be recycled easily. Aluminum’s beneficial physical properties include nonmagnetic behavior and its resistance to oxidation and corrosion. Aluminum does not display a true endurance limit, so failure by fatigue eventually may occur, even at low stresses. INDUSTRIAL MATERIALS Non-Ferrous Alloys

Aluminum Alloys General Properties and Uses of Aluminium Because of its low-melting temperature, aluminum does not perform well at elevated temperatures. Finally, aluminum alloys have low hardness, leading to poor wear resistance. Aluminum responds readily to strengthening mechanisms. INDUSTRIAL MATERIALS Non-Ferrous Alloys

Aluminum Alloys General Properties and Uses of Aluminium About 25% of the aluminum produced today is used in the transportation industry, another 25% is used for the manufacture of beverage cans and other packaging, about 15% is used in construction, 15% in electrical applications, and 20% in other applications. About 200 pounds of aluminum was used in an average car made in the United States in Aluminum reacts with oxygen, even at room temperature, to produce an extremely thin aluminum-oxide layer that protects the underlying metal from many corrosive environments. INDUSTRIAL MATERIALS Non-Ferrous Alloys

Aluminum Alloys Aluminum alloys can be divided into two major groups: wrought and casting alloys, depending on their method of fabrication. Wrought alloys, which are shaped by plastic deformation, have compositions and microstructures significantly different from casting alloys. Within each major group we can divide the alloys into two subgroups: heat treatable and non-heat treatable alloys. Casting Alloys contain enough silicon to cause the eutectic reaction, giving the alloys low melting points, good fluidity, and good castability. Fluidity is the ability of the liquid metal to flow through a mold without prematurely solidifying, and castability refers to the ease with which a good casting can be made from the alloy. INDUSTRIAL MATERIALS Non-Ferrous Alloys

INDUSTRIAL MATERIALS Non-Ferrous Alloys Aluminum Alloys

Copper Alloys Copper occurs in nature as sulfides and also as elemental copper. Copper was extracted successfully from rock long before iron, since the relatively lower temperatures required for copper extraction could be achieved more easily. Copper is typically produced by a pyro-metallurgical (high- temperature) process. The copper ore containing high-sulfur contents is concentrated, then converted into a molten immiscible liquid containing copper sulfide-iron sulfide and is known as a copper matte. This is done in a flash smelter. In a separate reactor, known as a copper converter, oxygen introduced to the matte converts the iron sulfide to iron oxide and the copper sulfide to an impure copper called blister copper, which is then purified electrolytically. INDUSTRIAL MATERIALS Non-Ferrous Alloys

Copper Alloys Copper-based alloys have higher densities than that for steels. Although the yield strength of some alloys is high, their specific strength is typically less than that of aluminum or magnesium alloys. These alloys have better resistance to fatigue, creep, and wear than the lightweight aluminum and magnesium alloys. Many of these alloys have excellent ductility, corrosion resistance, electrical and thermal conductivity, and most can easily be joined or fabricated into useful shapes. Applications for copper-based alloys include electrical components (such as wire), pumps, valves, and plumbing parts, where these properties are used to advantage. Copper alloys are also unusual in that they may be selected to produce an appropriate decorative color. Pure copper is red; zinc additions produce a yellow color, and nickel produces a silver color. INDUSTRIAL MATERIALS Non-Ferrous Alloys

Copper Alloys Copper containing less than 0.1% impurities is used for electrical and microelectronics applications. Small amounts of cadmium, silver, and Al 2 O 3 improve their hardness without significantly impairing conductivity. INDUSTRIAL MATERIALS Non-Ferrous Alloys