Figure 1: The GT-1000 Solar PV Technology Panel

Identify and inventory the components that make up the GT-1000 Solar Photovoltaic Installer training system at this point. Solar Panels (2) DC Ammeters (2) AC Ammeters (6) Fuse Holders and Fuses (2) Disconnect Switches (2) 30 Amp/50 Amp Breakers (2) Load Diverter/Regulator (continued)

Identify and inventory the components that make up the GT-1000 Solar Photovoltaic Installer training system at this point. (continued) Grid Tie Inverter Two-Row Electrical Connection Blocks (5) Diverter Load Light (Red Light) Load Lights (2) Master AC Power Switch 120 VAC Outlet 120 VAC On/Off Switches (2)

Figure 2: The Back of the GT-1000 Panel

Figure 3: Non-Mounted GT-1000 Solar PV Technology Panel Components

Identify and inventory the following non-mounted components Identify and inventory the following non-mounted components. These components should be on hand and available for use at this time: Photovoltaic Mounting Post 12V, 50W Photovoltaic Panels (2) Horizontal Support Rails (2) Mounting Clamps (2) 12V Rechargeable Batteries (4) Protective Battery Case with Cover Hand Held Digital Multimeter (continued)

Identify and inventory the following non-mounted components Identify and inventory the following non-mounted components. These components should be on hand and available for use at this time: (continued) Variable Intensity Light Source 12V Rechargeable Batteries (4) Wire (Black 18 AWG) Wire (Red 18 AWG) Wire (Black 12 AWG) Wire (Red 12 AWG) 12 and 18 AWG Crimp-on Fork Lug Connectors (continued)

Identify and inventory the following non-mounted components Identify and inventory the following non-mounted components. These components should be on hand and available for use at this time: (continued) Universal Side Mount Kit Hose Clamps (2) Bucket Mounting Piece Left and Right Vertical Support Rails Left and Right Mounting Clips