BAJA STATUS UPDATE September 27, 2011 FRAME & SUSPENSION Research Phase 100% completed Design Phase 75% completed – Frame Design (CAD) – Suspension Design.

Slides:

Advertisements

Similar presentations

SAE BAJA TEAM MEMBERS: CHAD CHANDLER JOE COFER NATHAN ERAMIAN

Advertisements

SAE Baja Senior Design Project

Design of a Baja SAE Vehicle

Powertrains Carsen Banister Objective: To explain the application of differentials within various powertrains Front Wheel Drive Rear Wheel Drive All Wheel.

Geometry of five link mechanism with two degrees of freedom David Tavkhelidze.

ODU Formula SAE MAE 435 Final Report 4/23/13. Introduction Charles Pearson The 2013 Michigan FSAE Competition Competition Scoring: Static Events o Design.

Dream Car Presentation by Nick Britten. Specs  3 Cylinder, 675 cc Engine  106 Horsepower  50.2 ft/lbs. of torque  Weighs only 416 lbs.  MSRP of $9,599.

Drive Train Ryan Barba Patrick Hickey Andrew Hill.

Powertrain Differentials David Ng. Objectives Familiarize with the essential elements of Powertrain Provide an oversight of torque and speed transfer.

 To understand and calculate gear ratios  To understand and demonstrate the relationship of torque and rotational speed  To understand and properly.

1 CALCULUS Optimization

Team HazardHawk Team HazardHawk The HazardHawk Team HazardHawk 2008.

Phase Difference = Phase Difference = 0.05.

Is the HUMVEE Powered Sufficiently? Operation Charge 10/5/06.

New Traction Drive Pairing with Inner Spherical Rotor for Automobile Usage Depart of Mechanical Design, Pusan National Univ. South Korea. Researcher: Ilkeun.

Flywheel Selection Need flywheel to simulate inertia of bus to model exactly how bus will react Option to manufacture our own flywheel or use existing.

Finite Element Analysis of Mini Baja Frame Ariana L. Gonzalez April 29, 2003 MECE.

Radio Controlled Jeep Chris Venditti Chris Ayoub Daniel Girgis Jonathan Avalishvili Paul Grobelny Saiff Ezeldin.

TEAM MEMBERS: Chad Chandler Joe Cofer Nathan Eramian Francis Hauris Jeff Wong.

SAE Mini Baja GROUP MEMBERS: JOHN MERRITT FRANCES OTHERSEN CHRIS DAVIS

SAE Mini Baja GROUP MEMBERS: JOHN MERRITT FRANCES OTHERSEN CHRIS DAVIS

GROUP MEMBERS: JOHN MERRITT FRANCES OTHERSEN CHRIS DAVIS JAMES CHAPMAN JOSEPH FANNING Baja SAE ® Series 2015 Status Update.

TextMonTuesWedThursFriSatSun Text example GANTT CHARTS Example text Text.

BAJA STATUS UPDATE November 9, 2011 FRAME & SUSPENSION Design Phase completed Analysis Phase 35% completed – Frame Design uploaded to PATRAN – Material.

Status Report # 4 LCDE Noe Flores, Marcos Lujan, Andrew Patton, Mark Steele September 17, 2012 The goal of our project is rectify problems with an existing.

Driven Drive Simple Gear B. 2. What is the position of the input shaft compared to the output shaft? Simple Gear B Parallel.

Two-Gear Gear Trains Using different size gear allows change in speed

Suspension Peter Morabito Michael Paliga Brian Ross Drivetrain Kenny Elliot Patrick Mooney Dylan Quinn Frame Dan D’Amico Curtis May Greg Schafran.

Abdelmageed Elmustafa

Automotive Power Trains By: Anthony John Manistre 4M-G.

SAE Baja Senior Design Project

New look New 6 speed gearbox ESP Product improvements Model year 2005 Content.

Vehicle Dynamics Term Project Driveline Modelling

DESIGN, FABRICATION, AND TESTING OF LANDER RAMPS FOR ROVER EGRESS Zack Morrison Hahna Alexander Anton Galkin 1 11/21/2011.

Motor is G.E 250 Hp 1750 Rpm Shunt Wound, 500 v Arm 300 V Field CD506AT Frame. Connected to forming extruder gearbox with a 6.66:1 reduction that drive.

Brennen Dav. That is one cool car. Glowing car.  Power: 500.1bhp  Torque: ft lsb  Top speed: 198mph  0-62mph: 4.1 seconds.

Warlocks 8/5/05 TMU FIRST Robotics 101 u Week 1) Gears, Pulleys, Sprockets, Bearings u Week 2) Motors & Controls u Week 3) Pneumatics u Week 4) Materials.

Warlocks 8/5/05 TMU FIRST Robotics 101 u Week 1) Gears, Pulleys, Sprockets, Bearings u Week 2) Motors & Controls u Week 3) Pneumatics u Week 4) Materials.

Ansys Workbench 11 Case Study with Design Optimization ME 520 Fundamentals of Finite Element Analysis.

Gear Ratios. Why? A firm grasp of gear ratio math will allow you to fine tune your vehicle's performance—specifically, its acceleration, torque and top.

Engine & Drivetrain  Engine: 2011 Yamaha YFZ-450r: Rebuilt entire engine: all new cylinder, head assembly, gaskets and bolts.  Spiral Plenum Design:

HUMAN POWERED TRACTOR Team Members: Ethan Harris: Team Leader/Design Engineer Matthew Burtis: Team Reporter/Design Engineer Brandon Roberts: Design Engineer.

Transverse Engine Front Wheel Drive

Gear ratio and machine Secondary two Design & Technology.

Greg Brown Logan Krier Ethan Oberg J Forrest Schumacher

Engine Dynamics A sample of power and torque performances for a spark ignition engine.

SECTION 5 Full Vehicle Analysis.

SAE Mini Baja: Drivetrain

SAE Mini Baja: Powertrain

SAE Baja Senior Design Project

SAE Baja Senior Design Project

Two-Gear Gear Trains Using different size gear allows change in speed

SAE Baja Senior Design Project

SAE Baja Senior Design Project

If we increase b2 from 10 to 20 will the optimal basis change?

Limited Slip Differential

GROpt.m (1) Copy the 7 files from GRopt.zip into one directory.

SAE Baja Senior Design Project

Two-Gear Gear Trains Using different size gear allows change in speed

Two-Gear Gear Trains Using different size gear allows change in speed

Two-Gear Gear Trains Using different size gear allows change in speed

Design of Powertrain for an Electric Car

Unit 3 Review (Calculator)

SAE Mini Baja: Powertrain

MECH 3550 : Simulation & Visualization

Project Progress: The Floating Dutchmen

Calculate 9 x 81 = x 3 3 x 3 x 3 x 3 3 x 3 x 3 x 3 x 3 x 3 x =

Warm Up: Name the parts of a wind turbine

LIMITED SLIP DIFFERENTIALS

Increasing V Torque Speed Characteristic of Regenerative Braking T.

Presentation transcript:

BAJA STATUS UPDATE September 27, 2011 FRAME & SUSPENSION Research Phase 100% completed Design Phase 75% completed – Frame Design (CAD) – Suspension Design (LOTUS) Upcoming Tasks – Finalize Suspension Kinematics – Frame Finite Element Analysis

BAJA STATUS UPDATE September 27, 2011 OPTIMAL GEAR REDUCTION RATIO ~ 7.5 MAX TORQUE~ 435 ft-lbs MAX SPEED ~ 35 mph GEARBOX Research Phase 100% completed Design Phase 30% completed – Data Calculations Reduction Ratio Max Torque Max Speed Upcoming Tasks – SolidWorks gearbox design – Order Rear Differential

GANTT CHART – 9/27/2011