Pioneering Science and Technology Office of Science U.S. Department of Energy Joseph Xu, apsctl, anl LCLS Motion Control Architecture Motion Drive/Devices.

Slides:

Advertisements

Similar presentations

EPICS Collaboration Meeting, CEA, Saclay, Oct 2014 The use of EtherCAT with EPICS at Diamond Ronaldo Mercado 22/10/2014.

Advertisements

Delta Tau Coordinate Systems and PLCs at Diamond Matthew Pearson Controls Group, Diamond Light Source Overview: Delta Tau Geobrick motor controller Delta.

Update of EXT Stripline BPM Electronics with LCLS-style Digital BPM Processors Glen White, with slides by Steve Smith 15 December 2009 ATF2.

Pico-SAM9G45 Development Board for Envirobat Presented by Kiran G K Date : 18/06/13.

ECT 459 Lecture 8 Encoder Feedback. Linear Linear –Absolute –Incremental –Both Rotary Rotary –Absolute –Incremental –Both.

Kirsten Hacker Triggering and Measurement Devices for LCLS 10/14/04 1 Triggering and Measurement Devices for the LCLS Undulator.

STARLight PDR 3 Oct ‘01I.1 Miller STARLight Control Module Design Ryan Miller STARLight Electrical Engineer (734)

Sheng Peng Motion Control in 3/12/ Motion Control in LCLS Sheng Peng EPICS Meeting 2008, Shanghai.

1 Arturo Alarcon 1 Undulator Controls Status FAC Undulator Controls Status Arturo Alarcon June 9, 2009.

Undulator Control Module Facility Advisory Committee Review, October 30th 2007.

A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.

Yurii Levashov LCLS Undulator Fiducialization October 20, 2005 *Work supported in part by DOE Contract DE-AC02-76SF LCLS.

A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.

A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.

Robert Ruland Installation Alignment -Magnetic Measurements – Fiducialization April 7-8, 2005 FAC Meeting 1 Installation Alignment,

Arturo Alarcon FAC, Undulator June 17, 2008 Undulator Control Module Facility Advisory Committee June 17, 2008 SLAC -

Microprogrammes control the KOMBIS TMM8003. For the reliable operation of its systems and devices there are several programs located in two controllers.

A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.

Arturo Alarcon Undulator Controls Module Status 11/12/2008 SLAC National Accelerator Laboratory 1 Undulator Controls Module Status.

A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.

CNC System. CNC System Encoders An encoder is a device, circuit, transducer, software program, algorithm or person that converts information from.

Data Acquisition and Control Systems HYTEC ELECTRONICS LIMITED Motor Control and Power Drive Support Graham Cross.

Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.Rev 5058-CO900D L14 - Drive Programming with the New PowerFlex ® 520-Series AC Drives.

8/8/2015IENG 475: Computer-Controlled Manufacturing Systems 1 IENG Lecture 11 Sensors, Actuators, and Relay Control Logic.

EtherCAT Driver for Remote I/O James Rowland, Ronaldo Mercado and Nick Rees.

H. MAINAUD DURAND on behalf of the CLIC active pre-alignement team with 3D views and data from Hubert Gerwig, Richard Rosing and Juha Kemppinen Pre-alignment.

Argonne National Laboratory is managed by The University of Chicago for the U.S. Department of Energy P0 Feedback Project: Merging EPICS with FPGA’s Nicholas.

Magnetic Lab Hall Probe Measurement System 8/26/2003 Key System Requirements Motion Control: SmartMotor via RS axis: x(0-400mm), y(0-400mm), z(0-6000mm),

EML 2023 – Motor Control Lecture 3 – Feedback Sensor Optical Encoder.

A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.

Hall Probe Calibration System

EPICS Insertion Device Control System Pete Owens EPICS Collaboration Meeting June 2003 Control System for a Helical Undulator Pete Owens Daresbury Laboratory.

Managed by UT-Battelle for the Department of Energy Kay Kasemir ORNL/SNS Feb Motor Support.

Robot and Servo Drive Lab. Department of Electrical Engineering Southern Taiwan University of Science and Technology 05/07/2014 T A R Y U D I Interfacing.

Controls for High-Availability Magnet PS’s for ATF2 Glen White SLAC September

Golf Swing Robot EE 486 Project Presentation College of Engineering and Technology Presented by Nasser Almarri.

Update on FPGA/IOC applications and RTEMS developments at the APS W. Eric Norum

Franz Peters, Georg Gassner WPM/HLS Status and June 17 th, WPM & HLS Status and Schedule Franz Peters, Georg Gassner.

LCLS Undulator Positioning Control System Shifu Xu, Joseph Xu, Josh Stein Control Group, AES/APS, ANL June 15, 2006.

A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.

A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.

The microIOC Family Gasper Pajor EPICS Collaboration Meeting Argonne National Laboratory June 2006.

Joshua Stein LCLS Undulator 20 Feb 06 LCLS Undulator Controls ANL LCLS All-Hands Meeting February 20, 2006 Josh Stein Argonne.

Internet 0 for Industrial Applications Fred Cohn 13-Dec-07.

ATF2 Mover Software 19 June 2008 Janice Nelson, Doug McCormick (SLAC) Glen White (LAL/SLAC) Justin May (no longer at SLAC)

Magnet Controls GroupOctober 4, Scope, Cost Estimate and Schedule To Complete The LCLS Magnet PS Controls P Bellomo and Kristi Luchini.

Stanford Linear Accelerator Center Ron Chestnut EPICS Collaboration Mtg May 21-23, SLAC EPICS Projects Yesteryear, Today, and Tomorrow.

A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.

LIGO-G9900XX-00-M LIGO II1 Why are we here and what are we trying to accomplish? The existing system of cross connects based on terminal blocks and discrete.

Diagnostics and Optimization Procedures for Beamline Control at BESSY A. Balzer, P. Bischoff, R. Follath, D. Herrendörfer, G. Reichardt, P. Stange.

438 labs. Labs Lab 1: Refreshing C and Linux Programming 2 Lab 1: Refreshing C and Linux Programming 2 – First: Getting familiar with development.

Pioneering Science and Technology Office of Science U.S. Department of Energy UNDULATOR SYSTEMS REVIEW MARCH 3-4, 2004 ARGONNE NATIONAL LAB. 1 LCLS Optical.

Debbie Rogind LCLS Magnet June 15, 2006 LCLS Magnet Control Challenging Design Issues “How to integrate the legacy system.

Debbie Rogind Diane Fairley SLC-Aware BSAC Facility Requirements Review May 26, 2005 SLC Aware IOC BSAC* Facility Requirements Review *Beam Synchronous.

Jeff T. Collins Undulator Support/Mover System 20 October 2005 LCLSLCLSLCLSLCLS LCLS Undulator Support/Mover System.

1 ATF2 Q-BPM Magnet Movers & 1 st Pulse Calibration Progress from May 7-11 J. May, D. McCormick, T.Smith (SLAC) S. Boogert (RH)

June 6, 2016 – Slide 1. ELECTRONICS THIS PROJECT ASSISTS THE END USER IN DESIGNING THE LAYOUT OF A MODULAR STUDY PROGRAM IN THE INDUSTRIAL ELECTRONICS.

LCLS Digital BPM Processor for ATF2 Extraction Line BPMs Steve Smith 26 August 2009.

Magnet Low Current PS Upgrade Kristi Luchini,Sandeep Babel, Till Straumann, Mitch D’Ewart, Briant Lam, Dave MacNair May 19, 2016 VME to Emedded Industrial.

Using COTS Hardware with EPICS Through LabVIEW – A Status Report EPICS Collaboration Meeting Fall 2011.

NEW UPGRADE TO THE APS MAGNETIC FIELD INTEGRAL MEASUREMENT SYSTEM

Automation Technologies SCADA SENSORS HMI

Control in Drive Systems

HAPS Controls Glen White ATF2 Software Review Workshop, LAL, June 2008

New Products 2013.

Quanser Rotary Family Experiments

Presentation of Robotics (3)

IENG 475: Computer-Controlled Manufacturing Systems

IENG 475: Computer-Controlled Manufacturing Systems

Presentation transcript:

Pioneering Science and Technology Office of Science U.S. Department of Energy Joseph Xu, apsctl, anl LCLS Motion Control Architecture Motion Drive/Devices CA over TCP/IP Ethernet Motion Drive/Devices Motion Drive/Devices Motion Drive/Devices Motion Drive/Devices Motion Drive/Devices Motion Drive/Devices Angular Position Sensors Field IOC (motion control /position readouts) Linear Position Sensors RS-232 Dry Contact (DC) DC Use modular field IOCs with EPICS Asyn on Linux. Use field IOC serial interface to control movers, one port per each mover. Use field IOC power to excite the linear/rotary potentiometers. Use field IOC onboard ADCs with linear/rotary potentiometers to monitor ID positions. Use field IOCs to translate the motion vectors. Use EPICS clients to calibrate the movers.

Pioneering Science and Technology Office of Science U.S. Department of Energy Joseph Xu, apsctl, anl Field IOC’s: Off-the-shelf Integrated Industrial Computer Systems (PC-104 based) with 16 ADC’s (16-bit) for position readouts and 8 RS-232 for motion controls. RT OS: Linux. EPICS 3.14.x w/ Asyn module. Field IOC Prometheus w/16x16 bit ADCs, Diamond Systems Inc. Size: 5.5”x5.75”x1.7”. Power: 5W. Each ID/Cradle Assembly has one Field IOC

Pioneering Science and Technology Office of Science U.S. Department of Energy Joseph Xu, apsctl, anl Motion Drive/Devices: Servo Motors with RS-232 interfaces. Motion Device SmartMotors from Animatics Corporations 2 for undulator segment translation. 5 for cradle assembly camshafts.

Pioneering Science and Technology Office of Science U.S. Department of Energy Joseph Xu, apsctl, anl Linear Position Sensors: Absolute position feedback with 2 microns repeatability and 0.2 micron resolution. Linear transducers (w/2-micron repeatability) from Novotechnik US, Inc. 2 for undulator segment translation and 8 for cradle assembly. With 16 bit readout, the resolution is 0.15 micron. Linear Position Feedback

Pioneering Science and Technology Office of Science U.S. Department of Energy Joseph Xu, apsctl, anl Rotary Position Sensors: Absolute position feedback with 0.1 degree repeatability and 0.01 degree resolution. Rotary transducers (w/0.004 degree repeatability) from Novotechnik US, Inc. 5 for cradle assembly camshafts. With 16 bit readout, the resolution is degree. Rotary Position Feedback

Pioneering Science and Technology Office of Science U.S. Department of Energy Joseph Xu, apsctl, anl Current Status Asyn/EPICS/Linux based Field IOC SmartMotor drive development: Completed. Motor drive unit test: Completed. Cam Shaft motion control and position feedback system development: In progress. Client (calibration) tools development: Pending. Development environment setup: In progress. Verification environment: Pending. Network mgnt: Pending. Interface with SLAC IT. Configuration mgnt: Pending. Interface with LCLS global ctls. System and network verification: Pending. Documentation: On going.