PHY132 Introduction to Physics II Class 7 – Outline: Ch. 23, sections 23.6- 23.8 The Thin Lens Equation The Lens-Maker's Equation Image Formation with.

Slides:



Advertisements
Similar presentations
Mirror and Lens by Rifki Irawan. a surface, such as polished metal or glass coated with a metal film, that reflects light without diffusion and produces.
Advertisements

Option G2: Optical Instruments
PHY132 Introduction to Physics II Class 6 – Outline: Ch. 23, sections The Thin Lens Equation The Lens-Maker's Equation Image Formation with.
Physics 1C Lecture 26B Quiz Grades for Quiz 2 are now online. Avg is again 67% Same as for Quiz 1.
Announcements Homework for tomorrow… (Ch. 23, Probs. 20, 22, & 24)
Convex and Concave Lenses
Announcements Homework for tomorrow… (Ch. 23, CQ7, Probs. 32 & 33)
Geometric Optics Chapter Thin Lenses; Ray Tracing Parallel rays are brought to a focus by a converging lens (one that is thicker in the center.
→ ℎ
Homework Notes If you are struggling with the homework, start working on it early enough that you can come to office hours if needed. You can go to the.
Chapter 31 Images.
Physics 1161: Lecture 16 Introduction to Mirrors.
Chapter 23 Mirrors and Lenses.
Chapter 23 Mirrors and Lenses Conceptual questions: 4,5,10,14,15,17
Chapter 36 Image Formation.
4/12: Applying the Lens/Mirror Formula  Today we will review problems 9-12 on the Light III calculation WS and then you will prepare for tomorrow’s test.
Chapter 23 Mirrors and Lenses. Medical Physics General Physics Mirrors Sections 1–3.
Curved Mirrors Chapter 14 Section 3.
PHY132 Introduction to Physics II Class 6 – Outline: Ch. 23, sections The Thin Lens Equation The Lens-Maker's Equation Image Formation with.
Chapter 34 Geometric Optics. What is Geometric Optics It is the study of light as particles. Geometric optics treats light as particles (or rays) that.
Reflection from Curved Mirrors. 2 Curved mirrors The centre of the mirror is called the pole. A line at right angles to this is called the principal axis.
Chapter 23 Mirrors and Lenses. Notation for Mirrors and Lenses The object distance is the distance from the object to the mirror or lens Denoted by p.
Chapter 23 Mirrors and Lenses.
Curved Mirrors.
Lecture 23 Mirrors Lens.
From Mirrors to Lenses. c f real image Real Images Rather than a virtual image (which is formed by virtual rays), a real image is formed by real rays!
2 nd & 3 th N.U.T.S. Workshops Gulu University Naples FEDERICO II University 3 – Imaging (thin lenses and spherical mirrors)
Chapter 34: Thin Lenses 1 Now consider refraction through this piece of glass: optic axis This is called a “Double Convex Lens” converging light focal.
Light: Geometric Optics
Chapter 25. Mirrors and the Reflection of Light Our everyday experience that light travels in straight lines is the basis of the ray model of light. Ray.
Reflection & Mirrors.
Your final homework (#12) is due Friday 25th April. This homework can be collected from my office area in SER 220 from Monday 28 th onwards (for exam revision).
Physics 1502: Lecture 30 Today’s Agenda Announcements: –Midterm 2: Monday Nov. 16 … –Homework 08: due Friday Optics –Mirrors –Lenses –Eye.
Copyright © 2009 Pearson Education, Inc. Chapter 32 Light: Reflection and Refraction.
Copyright © 2009 Pearson Education, Inc. Lecture 2 – Geometrical Optics b) Thin Lenses.
Chapter 23 Mirrors and Lenses.
Physics 1161: Lecture 16 Introduction to Mirrors.
Curved Mirrors and Ray Diagrams SNC2D. Concave Mirrors A concave mirror is a curved mirror with the reflecting surface on the inside of the curve. The.
Geometrical Optics (Lecture II)
Image Formation. We will use geometrical optics: light propagates in straight lines until its direction is changed by reflection or refraction. When we.
Physics 1C Lecture 26A.
Image formation Lenses and Mirrors. Object:p Image: q Focal length : f Magnification :M Real : light at image Virtual : no light Mirrors Lenses +p +q.
 Mirrors that are formed from a section of a sphere.  Convex: The reflection takes place on the outer surface of the spherical shape  Concave: The.
Chapter 23 Mirrors and Lenses.
8. Thin lenses Thin lenses are those whose thickness is small compared to their radius of curvature. They may be either converging or diverging. 1) Types.
Geometrical Optics – Part II Chapter Going Backwards 2.
1 2 Curved mirrors have the capability to create images that are larger or smaller than the object placed in front of them. They can also create images.
Geometric Optics This chapter covers how images form when light bounces off mirrors and refracts through lenses. There are two different kinds of images:
Geometrical Optics Chapter This week  This week we begin the study of optics. I have no idea how far we will get into these chapters.  Lenses.
Ch 23 1 Chapter 23 Light: Geometric Optics © 2006, B.J. Lieb Some figures electronically reproduced by permission of Pearson Education, Inc., Upper Saddle.
Test Corrections Due Tuesday, April 26 th Corrections must be done in a different ink color Lots of 4’s for effort – doesn’t mean answer is right! Check.
PHY138 – Waves, Lecture 9 Today’s overview Lenses The Thin Lens Equation Lenses Used in Combination.
Chapter 36 Image Formation.
Thin Lenses: Locating Images & Magnification Chapter 24: Interference.
1 32 Optical Images image formation reflection & refraction mirror & lens equations Human eye Spherical aberration Chromatic aberration.
Announcements Two exams down, one to go! No HW this week. Office hours: My office hours today from 2-3 pm (or make an appointment) Always check out
Lesson 4 Define the terms principal axis, focal point, focal length and linear magnification as applied to a converging (convex) lens. Define the power.
Today’s agenda: Death Rays. You must know when to run from Death Rays. Refraction at Spherical Surfaces. You must be able to calculate properties of images.
Physics 1202: Lecture 23 Today’s Agenda Announcements: –Lectures posted on: –HW assignments, etc.
PHY138 – Waves, Lecture 8 Today’s overview:
Physics 1202: Lecture 22 Today’s Agenda Announcements: –Lectures posted on: –HW assignments, etc.
CLASS :- X MADE BY :- MANAS MAHAJAN © Galaxysite.weebly.com - All Rights Reserved.
Calculate distances and focal lengths using the mirror equation for concave and convex spherical mirrors. Draw ray diagrams to find the image distance.
Part 10 Optics --Mirrors and Lenses Chapter 24 Geometric Optics.
Basics Reflection Mirrors Plane mirrors Spherical mirrors Concave mirrors Convex mirrors Refraction Lenses Concave lenses Convex lenses.
Chapter 32Light: Reflection and Refraction Formation of Images by Spherical Mirrors Example 32-7: Convex rearview mirror. An external rearview car.
Spherical Mirrors.
Announcements FINAL EXAM:
Thin Lenses – Ray Tracing
Lenses & Optical Instruments
Presentation transcript:

PHY132 Introduction to Physics II Class 7 – Outline: Ch. 23, sections The Thin Lens Equation The Lens-Maker's Equation Image Formation with Spherical Mirrors

Slide from Response Curves for the three types of cones in the retina of the human eye.

Additive Primary Colours (light bulbs) and Subtractive Primary Colours (ink)

Why the Sky Is Blue For small scattering particles, like nitrogen or oxygen molecules, higher frequency blue light is scattered much more readily than lower frequency red light.

Why the Sky Is Blue

If molecules in the sky scattered orange light instead of blue light, the sky would be A.orange. B.yellow. C.green. D.blue. Why Sunsets Are Red CHECK YOUR NEIGHBOUR

Why Sunsets Are Red Light that is least scattered is light of low frequencies, which best travel straight through air.

If molecules in the sky scattered orange light instead of blue light, sunsets would be A.orange. B.yellow. C.green. D.blue. Why Sunsets Are Red CHECK YOUR NEIGHBOUR

Image formation at a spherical interface R is positive means surface is convex toward the object R is negative means surface is concave toward object s o is positive means object is to the left of interface s i is positive means image is real, to the right of interface soso sisi

Lensmaker’s Formula so2so2 si2si2 so1so1 si1si1

Converging Lens Focal Point Focal length, f NOTE: Focal length is defined for initially parallel rays.

Diverging Lens Virtual Focal Point Negative Focal length, − f Rays appear to emerge from Virtual Focal Point

You can use the sun’s rays and a lens to start a fire. To do so, you should use QuickCheck 23.8 A.A converging lens. B.A diverging lens. C.Either a converging or a diverging lens will work if you use it correctly.

Focusing Power  Traditionally, lenses are specified not by their focal length, but by the inverse of their focal length.  This is called “focusing power”  The S.I. unit of focusing power is m –1  Traditionally, this unit is called the “diopter,” abbreviated D.

Diverging rays through a Converging Lens Focal length, f If an object emits rays at the focal point, they end up being parallel on the other side of the converging lens.

What will happen to the rays emerging to the right of the lens if the face is moved a little closer to the lens? A.They will remain parallel. B.They will diverge (spread out). C.They will converge (toward a focus). f

What will happen to the rays emerging to the right of the lens if the face is moved a little closer to the lens? B. They will diverge (spread out). f

What will happen to the rays emerging to the right of the lens if the face is moved a little further away from the lens? A.They will remain parallel. B.They will diverge (spread out). C.They will converge (toward a focus). f

What will happen to the rays emerging to the right of the lens if the face is moved a little farther away from the lens? B. They will converge (toward a focus). f

Diverging rays through a Converging Lens Focal length, f s s’ Thin Lens Equation:

Thin Lens Equation: sign conventions s s’ f object image s is positive for objects to the left of lens, negative for objects to the right of lens (virtual objects). s’ is positive for images to the right of lens, negative for images to the left of lens (virtual images). f is positive for converging lenses, negative for diverging lenses.

Example A lens has a focal power of +10 D. A 1 cm high object is placed 15 cm in front of the lens. Where does the image form? +10D s = 15 cm 1 cm

A lens produces a sharply focused, inverted image on a screen. What will you see on the screen if a piece of dark paper is lowered to cover the top half of the lens? A.An inverted but blurry image. B.An image that is dimmer but otherwise unchanged. C.Only the top half of the image. D.Only the bottom half of the image. E.No image at all. QuickCheck 23.10

Lateral Magnification The absolute magnitude of the magnification |M | is defined to be the ratio of image height to object height. A positive value of M indicates that the image is upright relative to the object. A negative value of M indicates the image is inverted relative to the object. Note that when s and s’ are both positive, M is negative.

Example A lens has a focal power of +10 D. A 1 cm high object is placed 15 cm in front of the lens. How large is the image, and is it upright or inverted? +10D s = 15 cm 1 cm

Ray Tracing With a converging thin lens

Ray Tracing With a diverging thin lens

 The figure shows a concave mirror, a mirror in which the edges curve toward the light source.  Rays parallel to the optical axis reflect and pass through the focal point of the mirror. Image Formation with Concave Spherical Mirrors

This focus only exists for rays that are close to the axis. No good focus This is called “spherical abberation”

A Real Image Formed by a Concave Mirror

 The figure shows parallel light rays approaching a mirror in which the edges curve away from the light source.  This is called a convex mirror.  The reflected rays appear to come from a point behind the mirror. Image Formation with Convex Spherical Mirrors

A Real Image Formed by a Convex Mirror

For a spherical mirror with negligible thickness, the object and image distances are related by: where the focal length f is related to the mirror’s radius of curvature by: The Mirror Equation

Midterm Test 1 Tuesday, Jan. 27, from 6:00pm to 7:30pm. Tomorrow! The test will actually begin at 6:10pm and last for 80 minutes; please arrive 10 minutes early if you can, so you can get settled This test will count for 15% of your mark in the course There will be no make-up for this test. Students who miss a test for legitimate and documented reasons will have the weight of the test transferred to the other test which will then count for 30% of their course mark You must go to the correct room, based on your Practical Group Your practical group is the one that shows under the "My PRA groups" link on the Portal

“Which room am I in on Tuesday at 6:00pm?” EX = Exam Centre, 255 McCaul St. HA = Haultain Building, 170 College St.

Midterm Test 1 The test will have:  12 multiple-choice questions worth 5 points each (total = 60)  Two long-answer problems counting for a total of 40 points, which will be graded in detail; part marks may be awarded, but only if you show your work. Please bring:  Your student card.  A calculator without any communication capability.  A pencil with an eraser.  A single, original, handwritten 8 1/2 × 11 inch sheet of paper on which you may have written anything you wish, on both sides.

Midterm Test 1 - hints Don’t be late. If you’re very early, just wait outside the room. Spend the first 2 or 3 minutes skimming over the entire test from front to back before you begin. Look for the easy problems that you have confidence to solve first. Before you answer anything, read the question very carefully. The most common mistake is misreading the question! Manage your time; if you own a watch, bring it. 10 problems over 80 minutes means an average of 8 minutes per problem. You CANNOT HAVE YOUR PHONE with you or in your pocket at a test or exam at U of T – you must store it in your backpack at the edge of the room, or in a special bag underneath your desk

Midterm Test 1 – more rules You are also allowed a paper dictionary as an aid – ie it could be a translation dictionary between your first language and English – the invigilator may flip through it to make sure no extra physics-stuff is written in there Bags, books pencil cases and ALL notes are to be deposited in areas designated by the Chief Presiding Officer and are not to be taken to the examination desk or table. If pencil cases are found on desks, they will be searched. If you bring a bag (paper, transparent plastic or non- transparent plastic), the following items may be stored inside it under your chair (as long as the bag is large enough): cell phone, wallet, laptop computer.

What will the test cover? Test 1 covers: –Knight Chapters. 20, 21, 22, 23 If it’s in the above reading, on MasteringPhysics, done in classes, or done in Practicals, it is material that is important and that you should know for the tests and final exam.

Where to get help Your classmates: go on Piazza.com, form a study group, hang out in MP125, etc Your two graduate student TAs. Learn their address, office hours, and office location. Me. After class + MP121B office hours are T12, F10, [Note I am away Friday Jan.23] Professor Meyertholen, MP129A office hours are M2, F11-12 The Physics Drop-In Centre in MP125, back corner MTWR 12-3, F11-2 Academic Success Centre in Koffler 1 st floor, inside the Career Centre

You see an upright, magnified image of your face when you look into magnifying “cosmetic mirror.” The image is located Clicker Question A. In front of the mirror’s surface. B. On the mirror’s surface. C. Behind the mirror’s surface. D. Only in your mind because it’s a virtual image.

Before Class 8 on Wednesday Please read Knight Pgs : Ch. 25, sections Note there is no pre-class reading quiz due Wednesday, as it is the morning after the test. Something to think about: If you rub a balloon on your head, it becomes negatively charged. Where does this charge come from? Does your hair also become negative, or does your hair become positive?