Type Code Labels and FlashScan® Type For All Onyx Panels including the NFS-320, NFS2-640 and NFS2-3030

What is the Difference Between Type Code Label, and FlashScan® Type?

What is the Difference Between Type Code Label, and FlashScan® Type? Type Code Label defines what you wish to do with a device FlashScan® Type is determined by what type of device is being used.

What is the Difference Between Type Code Label, and FlashScan® Type? Example: FSP-851 photo-electric smoke detector It can be an alarm input, or a supervisory. If supervisory, it can be tracking or latching. This is all determined by the Type Code Label. Regardless of selection, the FlashScan® Type will be PHOTO.

Type Code Labels Type Code Labels are software selections for: Initiating devices Detectors Monitor Modules Output devices Control Modules Relay Modules NACs

Type Code Labels for Detectors There are many types of Detectors Photo Ion Laser Heat (Fixed and Rate of Rise) Acclimate ® Plus™ HARSH™ (Hostile ARea Smoke Head) IntelliQuad™ (Smoke, Heat, IR and CO)

Type Code Labels for Detectors Possible uses for a PHOTO (FSP-851) detector Type Code Point Type Latching (Y/N) Activates CBE Device Function SMOKE (PHOTO) Fire Y Photoelectric smoke detector SUP L(PHOTO) Supervisory SUP T(PHOTO) N SMOKE (DUCTP) SUP L(DUCTP) SUP T(DUCTP) Other types of detectors would have similar options

Type Code Labels for Input Modules After auto-programming…. …. Default Type Code Label is MONITOR …. FlashScan ® Type is MONITOR or MINI/DUAL The panel doesn’t know what is connected to it It is up to YOU to tell it!

Type Code Labels for Input Modules Here are some examples of Monitor Module Type Code Labels. *Note that this type code label is only available for the NFS2-3030 ** Some type code labels allow for system functions, such as Acknowledge, Silence, Reset and Drill. Type Code Point Type Latching (Y/N) Activates CBE Device Function MONITOR Fire alarm Y Alarm-monitoring device PULL STATION Manual fire-alarm-activating device WATERFLOW S Supervisory Indicates supervisory condition for activated waterflow switch. FMM 4-20* User-programmable Monitors 4-20 mA industrial sensors RESET SWITCH** Non-alarm N Performs reset function *Note that this Type Code Label only applies to the NFS2-3030. **Type Code Labels also allow for some system functions, such as Acknowledge, Silence, Reset, and Drill

Type Code Labels for Output Modules After auto-programming…. …. the panel will often set default values to CONTROL or RELAY with the appropriate FlashScan ® Type. Again, the panel doesn’t know what is connected to it. It is up to YOU to tell it!

Type Code Labels for Output Modules Examples of Output Types taken from the NFS2-3030 Programming Manual *Note that this type code label is only available for the NFS2-3030 ** Some type code labels allow for system functions, such as Acknowledge, Silence, Reset and Drill. Type Code Silenceable Switch Inhibit Walk Test SLC Output Point Local Mode Group Point Types Device Function CONTROL Y N NAC n/a Supervised NAC RELAY Relay Relay output STROBE CKT Fire SPEAKER Supervised NAC for speaker circuits REL AUDIBLE Activates audio or visual devices steady when releasing starts.

Programming Examples

NFS2-3030 Point Programming This is the Type Code Label This is the FlashScan® Type

NFS2-640/NFS-320 Point Programming This is the Type Code Label Note that the FlashScan ® Type cannot be changed at the panel with the NFS2-640 or NFS-320.

VeriFire™ Tools Selection This is the Type Code Label This is the FlashScan® Type Note that this is the Point Programming screen for the NFS2-3030. The NFS2-640 and NFS-320 screens look different, but the selection process is the same.

FlashScan® Type When the panel is auto-programmed, the appropriate selection will be made. Most of the time, this is sufficient. However, there are a few instances to watch out for.

FlashScan® Type Issue #1 FlashScan® Type for the FDM-1, FMM-101, and XP-10M monitor modules is MINI/DUAL. If Type Code Label is changed using VeriFire Tools (i.e. WATERFLOW), it reverts to the generic FlashScan® Type of MONITOR. This will result in an Invalid Reply trouble for the device. It must be set to Mini/Dual prior to downloading.

FlashScan® Type Issue #1 Screen as it would appear after initial auto-program. Note that default values are set.

FlashScan® Type Issue #1 Change type Code Label to something else, like H20 flow.

FlashScan® Type Issue #1 Note what happens to the FlashScan® Type selection. This would have to set back to the MINI/DUAL selection to function properly.

FlashScan® Type Issue #2 For certain releasing Type Code Labels, the FlashScan® Type is automatically set to RELEASE. Recall that the FlashScan® Type is set by the hardware, not the application. Results in an Invalid Reply trouble RELEASE FlashScan® Type is only for the FCM-1 REL module Only applies to VeriFire™ Tools programming

FlashScan® Type Issue #2 This Type Code Label is used for a relay used to perform a releasing function Since it is an FRM-1 Relay Module, this is the incorrect FlashScan® Type.

FlashScan® Type Issue #2 This Type Code Label is used for a relay used to perform a releasing function The correct FlashScan® Type is RELAY

? Blah,Blah,Blah, Blah,Blah,Blah. What was he talking about ? Z z z z z z z z z z Questions, Comments, Ideas ? Basic Fire Alarm Technology