ENGR 220 Section 4.7. Saint-Venant’s Principle When loading is applied at a point on a body, it tends to create a stress distribution that becomes more.

Slides:

Advertisements

Similar presentations

Sample Problem 4.2 SOLUTION:

Advertisements

FRACTURE, FAILURE AND FATIGUE Catastrophic failure in materials resulting from crack development.

CHAPTER 4: FRACTURE The separation or fragmentation of a solid body into two or more parts, under the action of stresses, is called fracture. Fracture.

LECTURER5 Fracture Brittle Fracture Ductile Fracture Fatigue Fracture

Chapter 7 Fracture: Macroscopic Aspects. Goofy Duck Analog for Modes of Crack Loading “Goofy duck” analog for three modes of crack loading. (a) Crack/beak.

ME 240: Introduction to Engineering Materials Chapter 8. Failure 8.1 CHAPTER 8.

Chapter 11 Mechanical Properties of Materials

1 Classes #5, 6, 7, 8 Civil Engineering Materials – CIVE 2110 Stress Concentration Fall 2010 Dr. Gupta Dr. Pickett.

FIG. 1.4 Deformations produced by the components of internal forces and couples.

Analysis and Design of Beams for Bending

MAE 314 – Solid Mechanics Yun Jing

MAE 314 – Solid Mechanics Yun Jing

Complex Static Stresses and Torsion

Introduction – Concept of Stress

ENGR 225 Section Saint-Venant’s Principle When loading is applied at a point on a body, it tends to create a stress distribution that becomes.

ENGR 220 Section

4 Pure Bending.

Stress and Strain – Axial Loading

Mechanics of Materials II UET, Taxila Lecture No. (3)

THEORIES OF FAILURE THEORIES OF FAILURE FOR DUCTILE MATERIALS

ENGR 225 Section

Axially loaded member Axial load and normal stress under equilibrium load, Elastic Deformation.

Introduction – Concept of Stress

Introduction – Concept of Stress

4.5 FORCE METHOD OF ANALYSIS FOR AXIALLY LOADED MEMBERS

10 Pure Bending.

Thermal Strains and Element of the Theory of Plasticity

Structure Analysis I. Lecture 13 Cables & Arches Ch.5 in text book.

Elasticity and Strength of Materials

CHAPTER OBJECTIVES Review important principles of statics

Lecture # 6 Failure Intended learning Outcomes: 1.Describe the mechanism of crack propagation for both ductile and brittle modes of fracture. 2. Explain.

Chapter 2 Stress and Strain -- Axial Loading

MECHANICS OF MATERIALS Third Edition Ferdinand P. Beer E. Russell Johnston, Jr. John T. DeWolf Lecture Notes: S.A.A.Oloomi CHAPTER © 2006 Islamic Azad.

Load and Stress Analysis

STRUCTURES Outcome 3 Gary Plimer 2008 MUSSELBURGH GRAMMAR SCHOOL.

Mechanical Properties of Materials

Chapter 4 Axial Load. Saint -Venant's Principle Saint-Venant's Principle claims that localized effects caused by any load acting on a body will dissipate.

Fracture Overview Fall Figure 6.1 Rectangular plate with hole subjected to axial load. (a) Plate with cross-sectional plane;

FATIGUE Fatigue of Materials (Cambridge Solid State Science Series) S. Suresh Cambridge University Press, Cambridge (1998)

Mechanical Behavior, Testing and Manufacturing Properties of Materials

Stress and Strain – Axial Loading

Stress and Strain – Axial Loading

Failure Criteria and stress concentration

Mechanics of Materials – MAE 243 (Section 002) Spring 2008 Dr. Konstantinos A. Sierros.

Introduction – Concept of Stress

Overview of Mechanical Engineering for Non-MEs Part 2: Mechanics of Materials 6 Introduction – Concept of Stress.

CTC / MTC 222 Strength of Materials

Mechanics of Materials II UET, Taxila Lecture No. (4&5)

Mechanical Properties of Materials

Stress Concentrations

Course No.: MEBF ZC342 MACHINE DESIGN

Structure Analysis I. Lecture 7 Internal Loading Developed in Structural Members Ch.4 in text book.

EGM 5653 Advanced Mechanics of Materials

STRUCTURES Young’s Modulus. Tests There are 4 tests that you can do to a material There are 4 tests that you can do to a material 1 tensile This is where.

Analysis and Design of Beams for Bending

Engg College Tuwa Mechanics of Solids.( ) Presented by: PARMAR CHETANKUMAR VIKRAMSINH PARMAR NILESHKUMAR NATVARLAL PARMAR.

Machine Design: An Overview

Chapter 6: Failure Prediction for Static Loading

Introduction – Concept of Stress

Concept of Stress.

Introduction We select materials for many components and applications by matching the properties of the material to the service condition required of the.

Types of Fracture.

Mechanics of Materials Dr. Konstantinos A. Sierros

4.7 STRESS CONCENTRATIONS

Strain Transformation

Concept of Stress.

Presentation transcript:

ENGR 220 Section 4.7

Saint-Venant’s Principle When loading is applied at a point on a body, it tends to create a stress distribution that becomes more uniform at regions removed from the point of application.

Stiffeners are welded to corners to mitigate stress concentrations.

Stress Concentration Factor, K

Stress Concentration Factor

Important Points Stress concentrations occur at sections where the cross-sectional area suddenly changes. The more severe the change the larger the stress concentration

Important Points For design or analysis it is only necessary to determine the maximum stress acting on the smallest cross sectional area.

Important Points Normally the stress concentration in a ductile material that is subjected to static loading will not have to be considered in a design. If the material is brittle or subjected to fatigue loadings, then stress concentrations become important.

THE ROLE OF STRESS CONCENTRATION IN SLAB AVALANCHE RELEASE By R. A. SOMMERFELD U.S. Forest Service, Rocky Mountain Forest and Range Experiment Station, Fort Collins, Colorado 80521, U.S.A. ~1967 ABSTRACT Slab avalanches are shown to be released by brittle fracture. An analogy is drawn in which the snow- pack is considered to be a macroscopic, molecular model of glass. The analogy is examined qualitatively from two viewpoints: the Griffith fracture criterion, and stress concentration theory. The details of fracture propagation in a layered snow-pack are explained by means of stress concentration theory, and many details of slab avalanches are shown to be consistent with the proposed mechanism. The significance of various fracture surface markings is pointed out.

Lecture Example: Determine the maximum normal stress developed in the bar when it is subjected to a tension of P=2 kip.