Southern California Integrated GPS Network (SCIGN) This presentation will probably involve audience discussion, which will create action items. Use PowerPoint to keep track of these action items during your presentation In Slide Show, click on the right mouse button Select “Meeting Minder” Select the “Action Items” tab Type in action items as they come up Click OK to dismiss this box This will automatically create an Action Item slide at the end of your presentation with your points entered. Southern California Integrated GPS Network (SCIGN) Kenneth W. Hudnut U. S. Geological Survey U.S. – Japan Natural Resources Panel on Earthquake Research U. S. Geological Survey, Menlo Park - November 14, 2000
Continuous GPS Best tool ever devised for highly accurate, automated, constant monitoring of crustal strain for long baselines absolute ref. frame displacement field high precision SCIGN & other PBO elements require sub-millimeter velocities on the plate boundary scale in order to answer the scientific questions
Faults & Earthquakes San Andreas fault zone North American and Pacific plate relative motions of 56 mm/yr in a right-lateral sense Eastern California shear zone Accomodation of right-lateral motion inboard of Sierra Nevada block Estimated rates of some 8-12 mm/yr (geological & space geodetic) Easier to go through than the Big Bend?
SCEC crustal motion map Combined EDM, VLBI, survey-mode and continuous GPS rigorously Released as a SCEC product Set the bar very high for the SCIGN project
Plate tectonic motions For the past 5 million years, this motion has been very steady at about 5 cm/yr From long-base laser strainmeter and geodolite data, steady rates of motion are seen Will higher resolution instruments see temporal variation in strain rate? tectonic reconstruction and movie by Tanya Atwater, UCSB
The major objectives of the SCIGN array are: To provide regional coverage for estimating earthquake potential throughout Southern California To identify active blind thrust faults and test models of compressional tectonics in the Los Angeles region To measure local variations in strain rate that might reveal the mechanical properties of earthquake faults In the event of an earthquake, to measure permanent crustal deformation not detectable by seismographs, as well as the response of major faults to the regional change in strain
SCIGN project installation: 250 sites by end of 2000
SCIGN station installation Each of 5 legs is drilled to 10 meters Lowermost 6 meters is anchored to earth by concrete grout Uppermost 4 meters is isolated from soil by foam Stainless for longevity movie by John Galetzka, USGS
Analysis comparisons by King, Hurst, van Domselaar & Langbein Time series reprocessed by JPL and SIO; similar - reference frame implementation processing strategy Mean differences for each of 6100+ baselines Line length proportional differences at <9 ppb
Hector Mine (Mw7.1) Photo by Paul ‘Kip’ Otis-Diehl, USMC, 29 Palms Helicopter support by OES and National Guard
Hector Mine eq.: modelled displacement field
Post-seismic deployment GPS for precise absolute position changes GPS data from these instruments will also show us afterslip and other post-seismic phenomena
Short-braced monument Requires bedrock Remote installation is feasible Half as expensive as drilled-braced (but not as stable) Useful for special post-earthquake network deployments
Post-seismic deformation Stations near the earthquake fault continue to move after the earthquake Less than 20 mm motion recorded, so we required extremely high precision data Too much motion to be explained by aftershocks Requires a deep source in the lower crust Large scale relaxation phenomenon May explain fault interaction between large earthquakes
Inboard shear strain transfer (preliminary & speculative) Savage et al. (1993) and Johnson et al. (1994) showed NW-SE pull apart of 8 mm/a in USGS geodolite data prior to 1992 Landers sequence [orange] We see similar pattern after Hector Mine, farther to northeast [red]
GPS & telemetry/networking Market for GPS boards is driven by Moore’s law (like PC’s) toward faster/better/cheaper, miniaturization, etc. Spread spectrum radio and satellite telemetry leading to high bandwidth IP field networking (e.g., TDMA) Allows higher sampling rates and more affordable real-time telemetry
SCIGN data acquisition and processing system
New methods: high-resolution topographic mapping and digital photography Laser scanning using an airborne platform requires high sampling-rate GPS data during flight to control aircraft position and attitude SCIGN stations were operated at 1 and 2 sample per second rates via the radio network
Existing GPS Networks in North America International GPS Service (IGS) So. Calif. Integrated GPS Network (SCIGN) Bay Area Regional Deformation (BARD) Basin and Range GPS Network (BARGEN) Pacific Northwest GPS Array (PANGA) Eastern Basin and Range & Yellowstone (EBRY) Contin. Operating Reference Stations (CORS) SuomiNet, FSL, INEGI, WCDA, etc.
Conclusions Networks of continuously operating GPS stations in the U. S. and Japan give us a higher resolution method to search for temporal variations in strain with renewed hope of learning about earthquake related processes Geodesy is now feasible in a network mode, similar to seismology – it is time to incorporate both, side by side, into modern earthquake monitoring networks – extending our reach to truly broad-band observational capabilities so that we can detect and study a wider range of seismic and aseismic phenomena
Short-braced rod monuments Good bedrock is needed Drill to one meter depth Epoxy rods in place Weld rods together movie by John Galetzka
Land Surveying and GIS New methods such as RTK require higher sampling rate base station data in real-time This is necessary for all work at accuracies of a few tens of centimeters or better Approximate georeferencing for GIS applications such as fleet management of inventorying can be met by non-differential GPS (SA is off now) or C/A code differential
Assess damage to infrastructure Were tilts or strains large enough to damage systems? (from regional measurements) Did damage occur to critical structures or systems? (from site-specific monitoring)
Structure monitoring Pacoima dam GPS monitoring since Sept. 1995 with LA County GPS data can indicate damage to engineered structures such as overpasses and tall buildings
New initiatives EarthScope - NSF USGS budget initiative Plate Boundary Observatory USGS budget initiative $12M/yr add-on partly in response to a new FEMA report State of California Governor’s initiative California Spatial Reference Center A non-profit organization to support spatial information infrastructure in California Will seek to sustain the infrastructure built with earthquake research funding
The Plate Boundary Observatory PBO’s GPS sites could provide spatial reference infrastructure throughout the Western U. S. A., as well as in Canada and Mexico
The San Andreas fault zone ‘focus array’ of PBO Geodetic networks for earthquake monitoring can provide the GPS infrastructure network that is also needed for Land Surveying and GIS applications
For More Information: http://pasadena.wr.usgs.gov/scign/ http://www.scign.org/ Ken Hudnut hudnut@usgs.gov (626)583-7232
InSAR results ESA data rapidly available from good repeat of recent pass JPL, Scripps and Caltech investigators quickly made results available on WWW Gilles Peltzer, JPL
regional active faults
California relative plate motions for the past 20 million years Tectonic reconstruction and movie by Tanya Atwater, UCSB