04/26/04By: Strobridge & Sulkoski1 G.U.S.T.E.R. General User System for Testing Engineered Rotors.

Slides:

Advertisements

Similar presentations

MP200 Presentation MICRO-BIT TECHNOLOGY, INC..

Advertisements

ELECTRICAL POWER AC MOTOR & DC MOTOR.

Engineer Training Supply Unit TJ8300 / TJ8500 Supply Unit.

Linked Thermostat Alan Diamond Ravi Patil. Objectives  Temperature sensing device  Multizone capabilities (two)  Heating and Cooling operation  Personal.

09/05/2003 Created by: Mike Loiselle 1 MINI PROJECT THE PULL’N PLOT.

EML 2023 – Motor Control Lecture 4 – DAQ and Motor Controller.

Wind Turbine Simulation (Phase IV) SDMAY Advisor: Dr. Venkataramana Ajjarapu.

Application Types Variable Torque Constant Torque.

Flexible Manufacturing with a Robotic Arm and Lego’s ELM 4701 ELM Project Fall 2002.

Auto - Drive An Automated Driving Range. Team Members Mike Loiselle Jared Beland Jeremy Paradee.

P10054 Enhancements to Cigarette Smoking Machine Senior Design Fall/Winter 2009 Team Lead Frank Forkl (ME) Slide 1 of 8 P10054.

02/10/2004By: Strobridge & Sulkoski1 G.U.S.T.E.R. Electrical Design Project Presentation.

Project: Ink Slinger Team Members Mandi Fournier Stephen Gagnon Ryan Kittredge Matt Nusbaum Adam Ranney Denver Wilson.

Team Hybrid  Daniel Farley  John Hoyt  Sean Frost Hoyt.

September 23, 2003Jeff Wilson1 The Go-Go Gantry Jeff Wilson Lee Strobridge Allison Bodis David Carlson Mark Jarrett Jeremy Paradee.

Auto - Drive An Automated Driving Range. Team Members Mike Loiselle Jared Beland Jeremy Paradee.

02/10/2004By: Strobridge & Sulkoski1 G.U.S.T.E.R. Mechanical Design Project Presentation.

Professor Windmill An Educational Feedback Control System ELM Senior Project Dave Carlson Jeff Wilson.

Logic-level outputs can’t drive a motor directly. Solution: Relays –Relays allow one circuit to switch a second circuit –isolates circuit from potentially.

Auto - Drive An Automated Driving Range. Team Members Mike Loiselle Jared Beland Jeremy Paradee.

Team Hybrid  Daniel Farley  John Hoyt  Sean Frost Hoyt.

September 24, 2003 Created by: P'n'P Team 1 ELM-4701 MINI PROJECT THE PULL ’N’ PLOT.

10/26/2003By: Strobridge & Sulkoski1 G.U.S.T.E.R. General Universal System for Testing External Rotors.

1. Wind Tunnel Control (WEBWIND) By: Adam Green Advisor: Dr. Aleksander Malinowski Dr. Scott Post Bradley University Department of Electrical Engineering.

Wind Instrument Testing Apparatus Project WITAP Team: Rob Koch Andy Lawrence.

Team Bi-directional -Keith Beland -Christian Brinegar -Justin Marsha.

12/13/2003By: Strobridge & Sulkoski1 G.U.S.T.E.R. General Universal System for Testing External Rotors.

October 07, 2003 Created by: P'n'P Team 1 ELM-4701 Mini Project PULL ’N’ PLOT A Poster Plotting System.

11/06/2003By: Strobridge & Sulkoski1 G.U.S.T.E.R. General Universal System for Testing External Rotors.

04/13/2004By: Strobridge & Sulkoski1 G.U.S.T.E.R. Status Report 4.

GRAMM International Future Energy Challenge ‘07 Geoff Sanders, Richard Tan, Ankit Tripathi, Maung Myat, and Marc Hesse Versamachine.

01/21/2004By: Strobridge & Sulkoski1 G.U.S.T.E.R. Status Report.

Team Hybrid Hoyt MemberSubsystem Sean Frost Electric motor, motor controller, charge controller, charge accumulators Dan Farley Hydraulics system: Pumps,

Wind Turbine Simulation (Phase IV) SDMAY Advisor: Dr. Venkataramana Ajjarapu.

Abstract In 2008 President Geoffrey introduced the Live green program which called for environmentally conscious living. In light of this initiative, it.

Automated Feeding Solutions for Dog Owners Preliminary Design Review October 19, 2007 Project Automated Dog Feeder Project Advisor Dr. Hongwei Wu The Canine.

Charging system PT 1 LSy_w.

AC Electrical Box Assembly Main Rocker Switch Enclosure Fans E Stop Switch SSR and Relay Power from Wall Outlet Computer Logic Control Box Assembly Stepper.

Viking Pump Flow Manager - Phase 2 Senior Design May

Presented by:- NAME : Sanjay Kumar Pani BRANCH : Electrical & Electronics GROUP : ‘B1’ ROLL NO. : E/04/14.

Hybrid Wind & Solar Generation Project

0 Special-Purpose Electric Machines In addition to the types of machines we have studied so far, other types of special-purpose machines which operate.

A Company Selling Technology and not just a Product.

COMPUTER MAIN PARTS HARDWARE Y SOFTWARE JORGE MARIO RESTREPO VALENCIA CESDE.

Introduction In 2008 President Geoffrey introduced the Live Green Program which called for environmentally conscious living. In light of this initiative,

SDMAY11-01 Advisor: Dr. Ajjarapu Team Members: Luke Rupiper Shonda Butler Andrew Nigro Ryan Semler Chad Hand.

Multidisciplinary Engineering Senior Design Hardinge Universal Turret Project Critical Design Review May 13, 2005 Project Sponsor: Hardinge.

Wind Turbine Simulation (Phase IV)

THE GEORGE WASHINGTON UNIVERSITY SCHOOL OF ENGINEERING AND APPLIED SCIENCE DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING FINAL PRESENTATION WEATHER.

HARDWARE INTERFACE FOR A 3-DOF SURGICAL ROBOT ARM Ahmet Atasoy 1, Mehmed Ozkan 2, Duygun Erol Barkana 3 1 Institute of Biomedical Engineering, Bogazici.

PRINCIPLES OF OPERATION

Advisor: Dr. Edwin Jones 1 Client: Paul Jewell ISU Engineering Distance Learning Facility May01-13 Design Team: David DouglasCprE Matt EngelbartEE Hank.

Wind Turbine Design and Implementation. Team Members Members: Luke Donney Lindsay Short Nick Ries Dario Vazquez Chris Loots Advisor: Dr. Venkataramana.

Motors and Generators.

ECE4006 Senior Design Project Linda Milor and Jay Schlag

A power supply is a device that supplies electrical energy to one or more electric load. The term is most commonly applied to devices that convert one.

Period 7.   The more curved side generates low air pressures, due to more surface area. While high pressure air, pushes on the other side of the design.

STEP MOTOR Yisheng Zhang. Overview What is a step motor? How to control it? Why to use it? Where to use it? How to select it? Where to get it?

Brandon Halleran.  The power supply for your personal computer gives your machine all the different voltages it needs to operate properly. It is able.

BLDC Motor Speed Control with RPM Display. Introduction BLDC Motor Speed Control with RPM Display  The main objective of this.

Critical Air System Pressure Controller Senior Design Project, 2010 Morgan Hespe, Department of Electrical and Computer Engineering Mentor: Dr. Stanislaw.

Lesson 1 PLC BASICS. PLC Definition  Programmable Logic Controllers are industrial computers that control machine and other applications.  PLC have.

Fan Assembly Driven by Magnetic Fields

From Lecture1 vi , ii vo , io Power Processor Controller Source Load

Lesson 16: Asynchronous Generators/Induction Generators

Charging & Depositing Charged Metal Particles

Experimental study of the wake regions in wind farms

Inverters Converting dc to ac

ACOE347 – Data Acquisition and Automation Systems

18 Special-Purpose Electric Machine.

Presentation transcript:

04/26/04By: Strobridge & Sulkoski1 G.U.S.T.E.R. General User System for Testing Engineered Rotors

04/26/04By: Strobridge & Sulkoski2 Agenda  Background  Problem & Solution  System Components Mechanical Electrical Software  Budget

04/26/04By: Strobridge & Sulkoski3 Background  System used for educational purpose.  A fan is used to provide airflow for the testing of small wind rotors.  Old system was insufficient & inadequate. Consisted of:  Lego Generator & LEDs to measure power output.  The tunnel was a box shape made out of scrap material. Old Tunnel

04/26/04By: Strobridge & Sulkoski4 Problem Design & build a wind rotor testing system.  Capable of testing wind rotors up to a 20 inch diameter.  Automated, so the user can obtain measurements of rotor power output to wind speed graphically.

04/26/04By: Strobridge & Sulkoski5 Solution  Hub on generator for blade mounting  Variable blade pitch  Variable wind speed  Data Acquisition Card  Computer program with user interface

04/26/04By: Strobridge & Sulkoski6 System Overview Tubeaxial Fan HC08 Generator Wind Rotor DAQ (Data Acquisition Card) User at PC AC Drive Unit Variable Load Wind Tunnel

04/26/04By: Strobridge & Sulkoski7 Desired Tunnel

04/26/04By: Strobridge & Sulkoski8 Tunnel Prototype Wind Direction

04/26/04By: Strobridge & Sulkoski9 Hub Design

04/26/04By: Strobridge & Sulkoski10 Electrical Overview PC DAQ (in PC) +9V from PS±180V from PS +5V from PS Power Data Voltage Generated AC Fan Motor Generator HC08 AC Drive Unit Load Relay Wall Outlet PS = Power Supply

04/26/04By: Strobridge & Sulkoski11 Micro Controller Motor Controller AC Drive Unit Power Supply 11 22 33 +180VDC -180VDC GND 120VAC To Motor Phases DAQ Analog Output A/D Port A & B +5V GND

04/26/04By: Strobridge & Sulkoski12 Load Bank

04/26/04By: Strobridge & Sulkoski13 AC Drive State Machine State Off State 0 State  State  State  State  State  State Name Fet1 Fet2 Fet3Fet4 Fet5 Fet6 OFF ON Switch

04/26/04By: Strobridge & Sulkoski14 Budget

04/26/04By: Strobridge & Sulkoski15 Timeline

04/26/04By: Strobridge & Sulkoski16 Special Thanks  John. T. Murphy  Bob Royce  David Jarmey  John Kidder

04/26/04By: Strobridge & Sulkoski17 Any Questions? For more information visit our website: