CCNA 1 v3.1 Module 7 Review. 2 Which of the following has limited the bandwidth of fiber based Ethernet? (Choose three.) emitter technology absolute fiber.

Slides:

Advertisements

Similar presentations

CHAPTER Practical Ethernet Implementation. Chapter Objectives Provide a background on Ethernet itself and describe its characteristics Explain the practical.

Advertisements

CSC 450/550 Part 3: The Medium Access Control Sublayer More Contents on the Engineering Side of Ethernet.

CCNA 1: Module 7 Ethernet Technologies. Overview The most successful LAN technology –Easy to install –Has evolved to meet changing needs Media Increased.

Fast Ethernet and Gigabit Ethernet. Fast Ethernet (100BASE-T) How to achieve 100 Mbps capacity? Media Independent Interface provides three choices. LLC.

1 Version 3.0 Module 7 Ethernet Technologies. 2 Version 3.0 Legacy Ethernet 10BASE2 10BASE5 10BASE-T Same Timing Parameters...

Network+ Guide to Networks, Fourth Edition Chapter 3 Transmission Basics and Networking Media.

Networks & telecommunications Part 2 July 2, 2012.

1 NETWORKING TECHNOLOGIES (II) BUS Abdou Illia, Fall 2010 (October 20, 2010)

1 NETWORKING TECHNOLOGIES (II) BUS Abdou Illia, Spring 2007 (Week 9, Thursday 3/8/2007)

1 LANs are Subnet Standards Only Physical and Data Link Layer standards Implemented by the NICs:NICs Application Transport Internet LAN Subnet (NIC) Application.

TDC 461 Basic Communications Systems Local Area Networks 29 May, 2001.

Chapter 15: LAN Systems Business Data Communications, 4e.

Networks: Fast Ethernet1 Fast Ethernet and Gigabit Ethernet.

NESCOT CATC1 Ethernet Technologies CCNA 1 v3 – Module 7.

Ethernet Technologies

Ethernet By far, the dominant standard for guided media for the internet is Ethernet. How does it work?

Chapter 13 Wired LANs: Ethernet

Networking Software Solutions Chapter 4 Current Ethernet Specifications.

Module 7 Chapter 6 Ethernet Technologies. 10-Mbps Ethernet Legacy Ethernet –10BASE5, 10BASE2, and 10BASE-T Four common features of Legacy Ethernet –Timing.

Networks: Fast Ethernet1 Fast Ethernet and Gigabit Ethernet.

1 LAN Topologies, Access methods (Week 1, Wednesday 1/10/2007) © Abdou Illia, Spring 2007.

Copyright CCNA 1 Chapter 6, Part 1 Ethernet Technologies By Your Name.

LAN SYSTEMS. GIGABIT ETHERNET Gigabit Ethernet protocol (1000 Mbps). The IEEE committee calls the Standard 802.3z. The goals of the Gigabit Ethernet design.

Router. Switch Repeater Cable is the medium through which information usually moves from one network device to another. It used to connect one network.

1 Kyung Hee University Chapter 13 Wired LANs: Ethernet.

Ethernet Technologies

Network Security FAST & GIGABIT ETHERNET. Network Security Fast Ethernet: Goals  Upgrade the data rate up to 100 Mbps  Make it compatible with Standard.

Thin Ethernet (10B2 / IEEE 802.3a) Segment length 0.5 m Up to 30 attached nodes Cable flexible and cheap Integrated or external transceiver connected via.

Review: Medium Access Control Sublayer –What is the problem to be addressed in this sublayer? –Protocols that allow collision Pure ALOHA Slotted ALOHA.

Semester 1 Module 5 Cabling LANs and WANs. Ethernet Standards.

MODULE II LAN SYSTEMS.

Semester 1 Module 7 Ethernet Technologies

Basic network concepts (Part 5)

Chapter 13 Wired LANs: Ethernet

1 Computer Communication & Networks Lecture 13 Datalink Layer: Local Area Network Waleed Ejaz

Jaringan Komputer Dasar Ethernet Aurelio Rahmadian.

Logical & Physical Topologies A logical technology is how the hosts are connected logically example token Ring can be laid out in a physical star but.

Modern Ethernet Chapter 6. Contents Define the characteristics, cabling, and connectors used in 10BaseT and 10BaseFL Explain how to connect multiple Ethernet.

1 Ethernet & IEEE Cisco Section 7.3 Stephanie Hutter October 2000.

Module07-Ethernet Technologies By Uditha Gamage Sri Lanka Institute of Information Technology.

McGraw-Hill©The McGraw-Hill Companies, Inc., 2004 Chapter 14 Local Area Networks: Ethernet.

13.1 Chapter 13 Wired LANs: Ethernet Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Network Devices & Wiring Geert Jan de Groot. Network Wiring Half/full duplex Ethernet Network Wiring Autonegotiation Structured wiring Optics.

Local Area Networks: Ethernet. IEEE Background Institution of Electrical and Electronic Engineering (IEEE) A professional non-profit organization Project.

1 Data Link Layer Lecture 22 Imran Ahmed University of Management & Technology.

McGraw-Hill©The McGraw-Hill Companies, Inc., 2004 Chapter 14 Local Area Networks: Ethernet.

McGraw-Hill©The McGraw-Hill Companies, Inc., Chapter 14 Local Area Networks: Ethernet.

Local Area Networks © Prof. Aiman Hanna Department of Computer Science Concordia University Montreal, Canada Local Area Networks Part B.

Ethernet Physical Layer Topology: Order in which stations receive bits Ethernet hubs use a bus topology –Signal is broadcast –All stations receive.

 LANs – A Definition - A local area network (LAN) is a computer network covering a small physical area, like a home, office, or small group of buildings,

ETHERNET. Network Architecture Covers issue like how data will flow between the computers on the network. Involves with: Logical design Physical design.

1 © 2003, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.0 Module 4 Switching Concepts.

Sem1 - Module 7 Ethernet Technologies All versions of Ethernet have the same: 1.MAC addressing 2.CSMA/CD 3.Frame format However, other aspects.

Addressing Each station on an Ethernet network (such as a PC, workstation, or printer) has its own network interface card (NIC). The NIC fits inside the.

1 Traditional Ethernet 8Ethernet and CSMA/CD (IEEE 802.3) 8Carrier sense multiple access with collision detection 8Four step procedure 8If medium is idle,

CSCI 465 D ata Communications and Networks Lecture 22 Martin van Bommel CSCI 465 Data Communications & Networks 1.

Lesson 4—Networking BASICS1 Networking BASICS Network Architectures Unit 2 Lesson 4.

Transmission Media. Characteristics to consider for Media Selection Throughput Cost Installation Maintenance Obsolescence vs bleeding edge Support Life.

Chapter 14 Local Area Networks

Ethernet Advanced Chapter 5. Release 16/7/2009 Chapter Objectives Explain 10Base-T network Explain 10Base-FL Explain the rule Identify different.

Sem1 - Module 7 Ethernet Technologies. This module introduces the specifics of the most important varieties of Ethernet.

CCNA3 Module 4 Brierley Module 4. CCNA3 Module 4 Brierley Topics LAN congestion and its effect on network performance Advantages of LAN segmentation in.

LECTURE#6 - CABLES Asma AlOsaimi. Copper Coaxial Cable - Thick or Thin Unshielded Twisted Pair - CAT 3,4,5,5e&6 Optical Fiber Multimode Singlemode Wireless.

Semester 1 v CCNA 1 Module 7: Ethernet Technologies.

Wired LANs: Ethernet Shashank Srivastava Motilal Nehru national Institute Of Information Technology, Allahabad 4 Sep 2013.

Ethernet Technologies Khondaker Abdullah-Al-Mamun Lecturer, CSE Instructor, CNAP AUST.

1 NETWORKING TECHNOLOGIES (II) BUS Abdou Illia, Fall 2008 (November 4, 2008)

Chapter 14 Local Area Networks: Ethernet. Figure 14.1 Three generations of Ethernet.

CCNA1 v3 Module 7 v3 CCNA 1 Module 7 JEOPARDY S Dow.

1 Kyung Hee University Chapter 13 Wired LANs: Ethernet.

Presentation transcript:

CCNA 1 v3.1 Module 7 Review

2 Which of the following has limited the bandwidth of fiber based Ethernet? (Choose three.) emitter technology absolute fiber light-carrying capacities theoretical limits of fiber capacity fiber manufacturing processes detector technology angles and curves in the fiber run emitter technology absolute fiber light-carrying capacities theoretical limits of fiber capacity fiber manufacturing processes detector technology angles and curves in the fiber run

3 What are 2 Fast Ethernet technologies? 100BASE-TX 100BASE-FX

4 What are 3 media types that can be used in an implementation of a 10BASE-T network? Category 3 UTP Category 5 UTP Category 5e UTP

5 What are 2 reasons why an organization would choose to implement twisted pair cabling over coaxial cabling? easier to install cheaper

6 For a network manager planning the installation of a new network, what are 3 basic items that will be needed to implement a typical 10BASE-T network installation? Category 5 UTP cables RJ-45 connectors hubs or switches

7 What are 3 Ethernet technologies that are considered legacy Ethernet? 10BASE2 10BASE5 10BASE-T

8 What are 3 Ethernet technologies that share the same timing parameters? 10BASE2 10BASE5 10BASE-T

9 What common networking problem is eliminated when an Ethernet network uses separate transmit and receive wire pairs and a switched topology? collisions on the physical bus

10 Which class of repeater changes between one Ethernet implementation and another? Class I

11 What best describes how the Gigabit Ethernet, Media Access Control method views the link? point-to-point

12 What is the maximum distance that 10BASE-T will transmit data before signal attenuation affects the data delivery? 100 meters

13 What describes the Gigabit Ethernet bit patterns created at the physical layer? symbols

14 What is the most important aspect to consider when designing a 10BASE-T architecture? minimizing the delay between distant stations

15 To insure that 10 Mbps Ethernet timing limits are not exceeded, networks must comply with the rule. What is the meaning of the rule? no more than 5 segments separated by more than 4 repeaters, and no more than three populated segments

16 100BASE-TX operates in which 2 transmission modes? full-duplex half-duplex

17 Which of the following are common to all versions of Gigabit Ethernet? (Choose three.) packet size frame format medium timing transmission wavelength packet size frame format medium timing transmission wavelength

18 How does 1000BASE-T use the UTP wire pairs to accomplish transmission? all four pairs are used in parallel by both hosts to transmit and receive simultaneously