HAMMERS, PUNCHES & CHISELS

HAMMERS

BALL PEEN HAMMER PARTS HANDLE HEAD PEENING SURFACE

HAMMER PURPOSES USED TO DRIVE, BEND, STRAIGHTEN, ADJUST, PULL, AND ALIGN THINGS

PROPER USE OF HAMMER HOLD HAMMER FIRMLY NEAR END OF HANDLE STRIKE SQUARELY HANDLE CAN HIT YOUR ARM WHILE SWINGING CAUSING YOU TO MISS

PROPER USE OF HAMMER CHOOSE THE CORRECT SIZE FOR THE JOB YOU ARE DOING HEAD TWICE THE SIZE TOO BIG OF HAMMER

HAMMER MAINTENANCE BEFORE USING, MAKE SURE HANDLE IS NOT CRACKED OR BROKEN MAKE SURE HEAD IS ON TIGHTLY MAKE SURE HEAD ISN’T CRACKED

HAMMERS TYPES SLEDGEBALL PEENMALLET CLAW DEAD BLOW

HAMMER SIZES

PUNCHES

PUNCH PURPOSE USED TO DRIVE, PUSH, OR ALIGN THINGS ALL PUNCHES HAVE A FLAT NOSE EXCEPT THE CENTER PUNCH

PUNCH TYPES SOFT HARDENED STRAIGHT PUNCH TAPER PUNCH CENTER PUNCH HAS SHARP POINT

CENTER PUNCH USE MARKS METAL WITH SMALL INDENTATION TO HELP KEEP DRILL BIT CENTERED

CHISELS COLD ROUND NOSE CAPE DIAMOND CHISEL CHISEL CHISEL POINT CHISEL

CHISEL PURPOSES USED TO CUT THINGS CHISELS HAVE SHARP CUTTING ENDS

PROPER USE & SAFETY PUNCHES & CHISELS MAKE SURE THE HEAD DOESN’T HAVE A “MUSHROOMED” TOP –GRIND OFF BEFORE USING

PROPER USE & SAFETY PUNCHES & CHISELS (ON TOOL TEST) HOLD THE PUNCH OR CHISEL NEAR THE TOP OF THE HEAD –THIS ALLOWS YOUR HAND SOME GIVE IF YOU MISS WITH YOUR HAMMER

PROPER USE

PROPER USE & SAFETY ALWAYS USE EYE PROTECTION STRIKE SQUARELY USE THE PROPER SIZE OF HAMMER

HAMMERS PUNCHES & CHISELS QUESTIONS?