FP7-Fission LUCOEX Large Underground Concept EXperiments 2011 - 2014 Project Progress Meeting 14th May 2014 WP5 Problem handling tools for buffer installation.

Slides:

Advertisements

Similar presentations

HEAVY-DUTY FASTENER SYSTEMS

Advertisements

BMW 1985 – 325e Timing Belt and Water Pump Replacement

T N Todd JT60SA Remote Handling meeting 24th November 2008 Boom (transporter) Two-arm manipulator Remote Handling at JET Required due to high in- vessel.

Module 4: Hacksaws Mechanical Workshop.

Service box enclosure bolt recesses get encrusted with dirt, ice and debris. Current methods for clearing them are unsafe, difficult.

FP7-Fission LUCOEX Large Underground Concept EXperiments Project Progress Meeting 14th May 2014 WP5 Quality Control of Buffer Installation.

KBS-3H Initial State Lucoex Workshop: Installation, closure and initial state May 13-14, 2014 Antti Öhberg.

Q1 for JLAB’s 12 Gev/c Super High Momentum Spectrometer S.R. Lassiter, P.B. Brindza, M. J. Fowler, S.R. Milward, P. Penfold, R. Locke Q1 SHMS HMS Q2 Q3.

EURADWASTE´04 Large-scale Experiments in Underground Research Laboratories Experience in EBS Engineering Development and Handling Feasibility Christer.

Pipe Cutting System The evolution of Patented products Designed in Finland pipe cutting.

Self Drilling Rock Bolt Technology for the Coal Industry Advanced Solutions Ground Support Services Pty Ltd September 2007.

Progress on the MICE 201 MHz Cavity Design Steve Virostek Lawrence Berkeley National Lab RF Working Group Fermilab August 22, 2007  automatic.

TCC2-TDC2 working group Handling means for the TAX repairs JL GRENARD EN-HE 21th September 2011.

Home Work #4 Due Date: 18 Mar, 2010 (Turn in your assignment at the mail box of S581 outside the ME general office) The solutions must be written on A4.

Mounting arrangement for the Solid Absorber. This contains mounting arrangement for:- 1. Handling and lifting from manufacturer’s place to RAL; 2. For.

Weight-Volume Relations Soil can be considered as a 3-phased material Air, Water, Solids.

1 RF-Structures Mock-Up FEA Assembly Tooling V. Soldatov, F. Rossi, R. Raatikainen

Agricultural Mechanics 1 Kingsburg High School. Identifying Metals  All metals are either ferrous or nonferrous Ferrous metals contain iron(Fe) Nonferrous.

Luca Dassa – 23/02/ / 8 CRAB cavities meeting Preload Bolt size (1) Shear load: 602 N (p=0.26 MPa) -> Min preload: 2006 with Static friction coefficient:

Bapetco NORM Control Case Study IDENTIFY ASSESS CONTROL & RECOVERY.

Principal Stresses and Strain and Theories of Failure

DROP IN ANCHOR DETAIL COMMERCIAL SERIES LIFTS INSTALLATION MANUAL Drop In Anchor/COMMERCIAL SERIES.

LUCOEX Large Underground Concept EXperiments 2011 – 2014 Work Package 5 KBS-3V Emplacement tests in ONKALO Progress and Plans Project Progress Meeting.

Safety Induction to the Lift & Escalator Industry Part 4b – Mechanical Handling Part 4b – Mechanical Handling.

Long pallet heavy workpiece MTS + on a large milling machine.

Percussion drilling By Batch -2. Percussion drilling Cable Tool Drilling Percussion drills have been used to drill thousands of feet, though they are.

 2005 Pearson Education South Asia Pte Ltd TUTORIAL-1 : UNIAXIAL LOAD 1 PROBLEM-1 1 m P A composite A-36 steel bar shown in the figure has 2 segments,

모니터 리프트 규격서 (HML-500) Audio & Video System, Display, Conference System.

MKT May 2012 C850: Fast sliding gate operator. MKT May 2012 Summary  Why a fast slider operator?  USPs  Applications  Details  Technical specifications.

1 Discussion for basic options — engineering video conference July 12, 2006 Outline Water pool — advantages — issues, problems, engineering options Aquarium.

Fabrication Guide Triten Range Of Products. Cutting.

Structural option for the Jinping neutrino central detector Contributor ： Yuanqing Wang, Zongyi Wang Speaker ： Zongyi Wang Department of civil engineering,

 2005 Pearson Education South Asia Pte Ltd TUTORIAL-1 : UNIAXIAL LOAD 1 PROBLEM-1 1 m P A composite A-36 steel bar shown in the figure has 2 segments,

Flex Cam – Training This shows one version of a complete FlexCam system including Power Unit HCP and Compact Cam CC for piercing operation.

Physics 1B03summer-Lecture 12 1 Fluid Mechanics Pressure Buoyancy.

TF Coil Vacuum Vessel Wire Rope Tensioning Fixture 3 Per Segment Horizontal Stop 3 Per Segment Wood Block 2 Per Segment TFTR D&D FMEA REVIEW Vacuum Vessel.

ZDC Remote Handling Tool Structure and Force Analysis P. Debbins University of Iowa December 10, 2009.

Chia Po Lin EWTEC Lisbon PhD Thesis Edinburgh University.

4.4 SOIL NAILING SOIL NAILING IS A REINFORCEMENT METHOD TO REINFORCE THE GROUND WITH STEEL BARS OR STEEL BARS IN GROUT FILLED HOLES. IT IS MAINLY USED.

Mechanical Designs of The Central Detector Jinyu Fu

Shield Module Design Considerations Adam Carroll Van Graves July 3, 2014.

TAS at IP5 Present situation and plans François BUTIN TS/LEA.

Alternative Buffer Material Project meeting #

Shape of a rain drop.

Kapton module ass. Spacers for pins 3.6 m m 1.25 mm.

1 T i r e s a n d W h e e l s 2 What Wheels Are Made Of  Made  Made of stamped or pressed steel that are either riveted or welded together. or of aluminum.

LHCb Radiation Shielding Wall – Lifting Tool Overview.

T2K Remote Handling T. Sekiguchi (KEK) on behalf of Tada (KEK) 2012/11/10.

Baby Mind C OIL DESIGN AND ASSEMBLY SCENARIOS Helder Silva Phillipe Benoit Alexey Dudarev Gabriela Rolando Herman ten Kate Etam Messomo Laurent Nicola.

Clemson Hydro Deformation of Solids. Clemson Hydro Tensile test.

Thermal screen of the cryostat Presented by Evgeny Koshurnikov, GSI, Darmstadt September 8, 2015 Joint Institute for Nuclear Research (Dubna)

1 SORMAT Universal Facade Plugs S-UF, S-UP, S-FP For safer construction.

1. Two rods, one of nylon and one of steel, are rigidly connected as shown in Fig. P.1.2. Determine the stresses and axial deformations when an axial load.

Trough during installation of Micropiles TITAN and Foundation Plate.

Photograph Frame Project

SX1 manipulation VERSION 1 Version

Status of straw production straw module assembling

Components for the Machine-Interface Regions

TAS at IP1 Present situation and plans

My engineering project tipping swarf bin

nTof pipe cutting proposal Robotic platform design

The evolution of pipe cutting Patented products Designed in Finland Pipe Cutting System.

모니터 리프트 규격서(HML-500) Audio & Video System, Display, Conference System.

Chia Po Lin EWTEC Lisbon PhD Thesis Edinburgh University

Senad Kudumovic Design engineer

Educational Power Point by D&T Within Schools

QUADCOPTER PRODUCTION PLAN

Presentation transcript:

FP7-Fission LUCOEX Large Underground Concept EXperiments Project Progress Meeting 14th May 2014 WP5 Problem handling tools for buffer installation in KBS-3V Keijo Haapala

LOT3: Problem handling tools. What is needed if the bentonite block falls to the deposition hole during the installation? The broken blocks must be taken quickly out from the hole. The weight of the blocks are from 1.8 to 3.5 tons. 14th May 20142Haapala Keijo

LOT3: Problem handling tools. The work can be devided in two parts. Before canister installation After canister Big parts can be lifted by vacuum griper. 14th May 20143Haapala Keijo

LOT3: Problem handling tools. Before canister Repairing work by ”A man in the hole”. Lifting and cleaning buffer parts out from the hole Some fixing accessories has been tested Nylon Frame Plug Throughbolts. 14th May 20144Haapala Keijo

TESTING OF FIXING TOOLS Testing of tension and shear force of different fixing accessories in bentonite blocks has tested in Tampere university. Test blocks used in the tests Material MX-80 L x W x H: 400 x 300 x 250 mm3 Isostatically pressed 43 MPa, dry density 1742 kg/m3 14th May Blocks Vaterc ratio (weight-%) 116,5 216,7 316,2 417,1 Haapala Keijo

TESTING OF TROUGH BOLT (1) 14th May FBN 8/50, D8 – 85/111 MM, AXIAL FORCE Koe Murtovoima F max (kN) Murtosiirtymä s murto (mm)F keskiarvo (kN) Keskihajonta s x (kN) Koelohko 11,111,11 20,961,191,140,201 31,3611,81 Haapala Keijo

TESTING OF TROUGH BOLT (1) 14th May FBN 8/50, D8 – 85/111 MM, SHEAR FORCE Haapala Keijo

TESTING OF TROUGH BOLT (2) 14th May D10 – 75/92 MM, AXIAL FORCE Haapala Keijo

TESTING OF TROUGH BOLT (3) 14th May PFG 8/85 ( MM) AXIAL FORCE Koe Murtovoima F max (kN) Murtosiirtymä s murto (mm)F keskiarvo (kN) Keskihajonta s x (kN) Koelohko 11,594,52 21,692,61,710, ,8310,82 Haapala Keijo

TESTING OF TROUGH BOLT (3) 14th May PFG D8 – 85 ( MM) SHEAR FORCE Haapala Keijo

TESTING OF PLASTIC PLUG (4) 14th May Plastic plug HD82 – 7/105 (9 – 85 MM) AXIAL FORCE Koe Murtovoima F max (kN) Murtosiirtymä s murto (mm)F keskiarvo (kN) Keskihajonta s x (kN) Koelohko 12,362,02 21,912,42,200,252 32,332,52 Haapala Keijo

TESTING OF PLASTIC PLUG (4) 14th May Plastic plug HD82 – 7/105 (9 – 85 MM) SHEAR FORCE K Koe Murtovoima V max (kN) Murtosiirtymä s murto (mm)V keskiarvo (kN) Keskihajonta s x (kN) Koelohko 15,1420,81 25,4829,35,220, ,0515,92 Haapala Keijo

TESTING OF HEAVY TROUGH BOLT (5) 14th May PGF D12 – 112 MM ( MM) AXIAL FORCE Koe Murtovoima F max (kN) Murtosiirtymä s murto (mm)F keskiarvo (kN) Keskihajonta s x (kN) Koelohko 13,1913,53 22,766,12,970,0964 Haapala Keijo

TESTING OF HEAVY TROUGH BOLT (5) 14th May PGF D12 – 112 MM ( MM) SHEAR FORCE Haapala Keijo

LOT3: Problem handling tools. After canister Repairing work by ”No one in the hole” because of radiation. Possible to use remotely the same tools as ”Before Canister” situation Demonstrations will be done manually. 14th May Haapala Keijo

LOT3: Problem handling tools. After canister If it is needed to clear out the hole buffer, and be carefull with copper canister? -> Water jet cutting. 14th May Haapala Keijo

WATER JET CUTTING TOOL 14th May Haapala Keijo

WATER JET CUTTING TOOL 14th May Haapala Keijo

14th May Haapala Keijo