Graphics Assignment

I was asked to do a mug design thing so here it is

Different components include.. The body The fret board The pick ups The volume and tone control knobs The bridge The head and little small things [not sure what they are but they has a use] And finally the strings

Here The Body Its use it mainly to hold the pickups and most of the other main things to do with the pickups.

Here is the fret board It is where your fingers press down to make different tunes and you can play songs like the one that’s playing in this presentation.

Here are the pick ups Obviously the pick up something but what ? Well they pick up the notes that you play and they make the sensors receive the sounds and then it goes out from the amp.

Here are the Volume and Tone knobs Well simple really, you turn the knobs and you can adjust the volume and control, hence the name “volume and control knobs”

Here is the bridge It is attached to the body, it holds the bottom part of the string.

The head and the little things Well the head has ‘little things’ on it I’m not sure what the real names are but it comes with a tuner stick and when you turn it, it will change the pitch of the strings when played. And on the head they hold the top part of the string

Finally the strings Well they just make the sounds. Tighten or loosen them to change pitch. Not going to put a picture cause its just a string,

FINAL PRODUCT

At a hot price of $4,999 you wouldn’t want to miss out* * No refunds if you find any cracks or broken seals or even an empty box when the parcel comes to you door Order online NOW !! THE END !!