PHOENIX AUTHORISED DEALER IN BHARUCH DISTRICT. CONTACT: OR PHOENIX AUTHORISED DEALER IN BHARUCH DISTRICT. CONTACT: OR

GENERAL PROPERTIES OF PP-RC:- 1)POLYPROPYNE RANDOM CO-POLYMER PIPE. 2)TEMPERATURE:- -4*C TO +95*C. 3)PRESSURE:- UPTO 20KG/CM2 AGAINST TEMPERATURE/PRESSURE 4)ATLEAST YEARS LIFE EXPETANCY FOR JOINT GAURANTEE. 5)SOCKET FUSION WELDING MACHINE PROCESS 1) F ULL FORM OF PP-RC 2) T EMPERATURE WITHSTAND 3) P RESSURE WITHSTAND 4) V ALIDITY OF JOINT GAURANTEE 5) W ELDING PROCESS FACILITY 4/28/2015

MAIN CHARACTERISTICS OF PP-RC Noise The material’s elasticity and high insulation capacity mean a considerable reduction in the noise of the installation even when there is water hammering. Welding capacity This is fundamental characteristic of the system. It enables all the elements in the system to be joined by poly-fusion welding or the use of electric coupling. Portability The ANJNEY’s system is in full compliance with the international standards on the use of plastic materials for the transportation of drinking water. Head loss The internal surface of the pipes and fitting are smooth so limestone or other deposits cannot form and head loss is reduced to the minimum. 4/28/2015

MAIN CHARACTERISTICSOF PPRC:- Versatility The low specific weight means easy of transport and handling. The system can be used in traditional site installation, for the preparation of prefabricated constructions and in the creation of modules or fitted walls. Energy saving The reduced heat dispersion in association with a low thermal inertia, allow to supply hot water even if the pipe has not yet reached the average working temperature. The energy saving is in the range of 10% to 20%. Resistance to abrasion and corrosion This characteristic allows high flow velocities of the transported fluid.up to 7m/s, without any problem of erosion, even in the presence of acid and alkaline substance with PH values between 1 and 14. Low conductivity of the heat Since PP-R is a poor conductor of heat, condensation and heat dispersion of the transported fluid are considerably reduced Resistance to frost The typical elasticity of PP-R permits the enlargement of the pipe section under the thrust of the volume increase due to freezing of the conveyed liquid.. 4/28/2015

INDUSTRIAL APPLICATIONS :- 4/28/2015

PRODUCT RANGE - PHOENIX 4/28/2015

RESIN SPECIALITIES' FOR RANDOM CO-POLYMER:- ANJNEY GETS A SPECIAL GRADE RAW MATERIAL OF PP FROM ONE OF THE WORLD’S LARGEST POLYMER MANUFACTURING COMPANIES LIKE BASELL. THROUGH CONTINUOUS RESEARCH AND DEVELOPMENT, AND AFTER USING CERTAIN ADDITIVES AND SPECIFIC PROCESS, ANJNEY HAS DEVELOPED AND ENHANCED A SPECIAL GRADE OF PPRC. THIS SPECIAL GRADE HELPFUL LIKE VERY LESS THERMAL CONDUCTIVITY, COMPARED TO OTHER METAL AND POLYMER PIPES. THROUGH THIS ENHANCED VERSION, ANJNEY HAS MANUFACTURED PPRC HEAT SAVING PIPES FOR PREVENTING HEAT LOSS AND SAVING ENERGY. 4/28/2015

WHAT IS ANJNEY PPRC HEAT SAVING PIPES ? 4/28/2015

WALL THICKNESS OF PP-RC PIPES:- NOMINAL DIAMETER PN-10KG/CM2 MIN-MAX PN-16KG/CM2 MIN-MAX PN-20KG/CM2 MIN-MAX 20MM MM MM MM MM MM MM MM MM MM /28/2015

PIPE SELECTION CHART :- TEMP DEG C*PN-10KG/CM2PN-16KG/CM2PN-20KG/CM /28/2015

AGAINST METALLIC PIPES, PROVES SUPERIOR :- IT IS A TENDENCY OF ALL INDUSTRIES THAT THEY MOSTLY USE METAL PIPES (MS, GI, CI, SS) FOR EACH AND EVERY APPLICATION, WHETHER FOR HOT OR COLD TEMPERATURE. WHEREAS ANJNEY HAS DEVELOPED PPRC HEAT SAVING PIPES FOR DIFFERENT APPLICATIONS, THROUGH CONTINUOUS RESEARCH AND DEVELOPMENT, AND THROUGH PRACTICAL EXPERIENCE. FROM THE YEAR 2003 TO 2005, WE HAVE GIVEN FREE INSTALLATIONS IN MANY DIFFERENT INDUSTRIES AND TESTED THE SUITABILITY OF OUR PRODUCT PRACTICALLY. THEN ENHANCING OUR PRODUCT ACCORDINGLY. WE INTRODUCED THE SAME INTO MARKET. ANJNEY OFFERS PPRC HEAT SAVING PIPES WITH A CHALLENGE TO SAVE UP TO 60 % ENERGY, IN BOTH COLD AND HOT APPLICATIONS. SO IT IS SUITABLE FOR ANY TYPE OF CORROSIVE FLUID, CHEMICAL OR WATER. RESULT:- IN THE LAST 2-3 YEARS PHOENIX HAS COMPLETED 100 SUCCESSFUL INSTALLATIONS IN VARIOUS CHEMICAL, PHARMACEUTICALS AND DIES INDUSTRIES. 4/28/2015

AGAINST G.I.PROPERTIES :- 4/28/2015

U.V.STABILISED CHAPTER FOR OUTDOOR APPLICATION [SUN PROTECTION LAYER]:- 4/28/2015

ACTUAL PERFORMANCE IN CORROSIVE ATMOSPHERE:- 4/28/2015

SCRUBBER PIPELINES BY CONVERTING THE HDPE PIPING

4/28/2015 D.M.WATER PLANT – PPRC PIPES & FITTINGS.

4/28/2015 PPRC PIPING FOR SUCTION PUMP CUM HEADER

4/28/2015 VARIOUS CHEMICAL PIPING – PPRC PIPES & FITTINGS

4/28/2015 TURNKEY PROJECTS – ETP PIPING BY REPLACING THE HDPE PIPING

4/28/2015 GNFC LIMITED – D.M.WATER PLANT PIPING ( REPLACING HDPE PIPING)

4/28/2015 GNFC LIMITED – FRP TANK PPRC PIPING CONNECTION

4/28/2015 HEAT EXCHANGER PLANT – PPRC-PPCH PIPES & FITTINGS AT BLUSTAR LIMITED

4/28/2015 REMI METAL GUJARAT LIMITED-4 YEARS BEFORE INSTALLATION

4/28/2015 PP-RC PIPES & FITTINGS HEADER PART-I

4/28/2015 PPRC PIPES & FITTINGS HEADER PART II

4/28/2015 PPRC PIPES & FITTINGS HEADER PART-III

4/28/2015 EFFULENT WATER TRASFER PIPING AT ETP PLANT

4/28/2015 VARIOUS BRANCHES FROM ONE PPRC HEADER FOR ETP

4/28/2015 PUMP TO DISCHARGE PPRC PIPELINES

S 4/28/2015 INFACT, WE HAVE THREADED PARTS IN PPRC FITTINGS FOR PRESS.GAUGE & TEMP.GAUGE

4/28/2015 FABRICATION WAS ON FOR PPCH PIPES & FITTINGS WHILE CAPTURE WAS DONE AT FIRST CARBON TECHNO-DAHEJ

4/28/2015 AUTHORISED DISTRUBUTOR FOR BHARUCH DISTRICT