EE 294 Master’s Project Spring 2006 D.A.S. Deaf Alert System By Robert Wangai Samer Ashkouri

Introduction Build & design a fire alarm alert system for a hearing-impaired person. Build & design a fire alarm alert system for a hearing-impaired person. This system will inform the user of a fire visually and physically. This system will inform the user of a fire visually and physically. As an added feature, a door bell system will be integrated with the fire alarm system to indicate to the user that someone is at the front door. As an added feature, a door bell system will be integrated with the fire alarm system to indicate to the user that someone is at the front door. This system will be monitored through a computer to keep an updated status in case of an emergency. This system will be monitored through a computer to keep an updated status in case of an emergency.

4 Major Parts Smoke detector with designed circuit. Smoke detector with designed circuit. Door bell system. Door bell system. Pager like portable device. Pager like portable device. Computer interface board. Computer interface board. All of these parts will use wireless communications to interact with each other… All of these parts will use wireless communications to interact with each other…

Smoke detector with designed circuit A communication circuit board was designed to transmit data from the smoke detector to the portable device. A communication circuit board was designed to transmit data from the smoke detector to the portable device. In addition, we integrated a strobe light in this circuit to visually alert the user. In addition, we integrated a strobe light in this circuit to visually alert the user. The smoke detector requires a 9-volt battery to operate. The smoke detector requires a 9-volt battery to operate. The circuit board requires a 9-volt battery to operate. The circuit board requires a 9-volt battery to operate. The strobe light requires 2 AA (3-volt) batteries to operate. The strobe light requires 2 AA (3-volt) batteries to operate. The user will have the option of using either batteries or an AC adapter for their source of power. The user will have the option of using either batteries or an AC adapter for their source of power.

Smoke detector with designed circuit

Door bell system The door bell system is an added feature to help improve the user’s life style. The door bell system is an added feature to help improve the user’s life style. It will transmit signals to the portable device, which can then inform the user when there is a person at the door. It will transmit signals to the portable device, which can then inform the user when there is a person at the door. The door bell system requires a 9-volt battery to operate. The door bell system requires a 9-volt battery to operate.

Door bell system circuit

Pager like portable device This pager like portable device will act as a receiver and will gather data from the smoke detector & the door bell. This pager like portable device will act as a receiver and will gather data from the smoke detector & the door bell. This portable device alerts the user both physically (by vibration) & visually. This portable device alerts the user both physically (by vibration) & visually. Visually, a red LED light will turn on incase of a fire. In case of the door bell being pressed, a green LED light will turn on. Visually, a red LED light will turn on incase of a fire. In case of the door bell being pressed, a green LED light will turn on. Ideally, this portable device will be worn on the belt or on the wrist of the user. Ideally, this portable device will be worn on the belt or on the wrist of the user.

Pager like portable device circuit

Computer interface board A communication circuit board was designed to receive data from the smoke detector and the door bell device. A communication circuit board was designed to receive data from the smoke detector and the door bell device. In addition, it will monitor alarms through an RS pin cable connection to a computer. In addition, it will monitor alarms through an RS pin cable connection to a computer. An AC adapter will be needed to help power this device. An AC adapter will be needed to help power this device.

Computer interface board circuit Part-1

Computer interface board circuit Part-2

Schedule

Cost Estimate $54 for smoke detector unit 1. $ 8 for transmitter 2. $ 10 for circuit board 3. $ 2 for encoder 4. $ 8 for smoke detector 5. $ 12 for strobe light 6. $ 14 for 9v battery & AC adapter $24 for door bell system 1. $ 8 for transmitter 2. $ 10 for circuit board 3. $ 2 for decoder 4. $ 4 for 9v battery $24 for pager like portable device 1. $ 8 for receiver 2. $ 10 for circuit board 3. $ 2 for decoder 4. $ 4 for 9v battery $23 for computer interface board 1. $ 3 for PIC16F628A 2. $ 8 for receiver 3. $ 2 for decoder 4. $ 10 for circuit board $125 Total cost

Deaf Alert System

Conclusion The Deaf Alert System will be used as an early warning system incase of a fire emergency. The Deaf Alert System will be used as an early warning system incase of a fire emergency. It will additionally help the user find out when someone is at the front door. It will additionally help the user find out when someone is at the front door. Finally, this system will keep an updated status and monitor any kind of alarm on the user’s personal computer. Finally, this system will keep an updated status and monitor any kind of alarm on the user’s personal computer.

Thank You Questions?