Bioreactor Analysis and Operation Chapter 9&10 (textbook)

Slides:



Advertisements
Similar presentations
Introduction to Bioreactors
Advertisements

Reactor Design for Cell Growth
Fermentation Technology
By: Mdm. Noor Amirah Abdul Halim BIOREACTION AND BIOREACTOR.
Activated Sludge Design (Complete Mix Reactor)
Chapter 3: Bioreactor Design
Production Of Enzymes By Fermentation Method
Respiration.
Fermentation Kinetics of Yeast Growth and Production
Industrial Production of Citric Acid Application of Citric Acid: (text,p.524) -Acidulant in food, confectionary, and beverage (75%) -Pharmaceutical (10%),
Cell Growth Kinetics Introduction
Microbial Growth Kinetics
Chapter 3: Types of BioreactorS
F215 control, genomes and environment
Cells Growth in Continuous Culture Continuous culture: fresh nutrient medium is continually supplied to a well-stirred culture and products and cells are.
Reaction Engineering.
Choosing the Cultivation Method
What is a Fermenter? Vessel or tank in which whole cells or cell-free enzymes transform raw materials into biochemical products and/or less undesirable.
Microorganisms used in food production
HCDC of E. coli under Fed- Batch conditions High cell density cultures Chemostat and Batch culture have different advantages and problems Productivity.
Microbial Biotechnology Commercial Production of Microorganism
FERMENTATION.
Running of a pilot fermentor
Lecture 6: Product Formation Stoichiometry
FERMENTATION.
Chpt. 12: Respiration. Two types of respiration External Respiration Internal respiration -is the process by which - is the controlled organisms exchange.
Microbial Fermentation (Enzymology, Metabolic pathways and Fermentation aspects) OSAMA O. IBRAHIM, PH.D. CONSULTANT BIOTECHNOLOGY GURNEE IL
An Empirical Investigation of Delayed Growth Response in Escherichia coli Nariman Ghoochan Jerald D. Hendrix Sean Ellermeyer Department of Biological and.
Lecture 1: Kinetics of Substrate Utilization and Product Formation
 Those that aim to produce cell mass (biomass)  Those where the product is produced by the cells, eg enzyme or metabolite  Those that modify a compound.
Instrumentation and control
Batch Growth Kinetics Heat generation by microbial growth
Continuous & Batch Fermentation
Title: The growth curve Homework: complete learning package 1214 January 2016.
Miss : SALSABEEL H. AL JOUJOU
Immobilized Cell System
HCDC of E. coli under Fed- Batch conditions Whiffin Cooney Cord-Ruwisch High cell density cultures Chemostat and Batch culture have different advantages.
Presented by: Shehneela Baseer Zainab Sajjad
Lec # 8 Fermentation biotechnology
Types of Bioreactors / Fermenters
Metabolites – primary and secondary. Learning Outcomes Compare and contrast the processes of continuous culture and batch culture. Describe the differences.
Microbial growth in:- Closed Cultivation Systems Open Cultivation Systems Semi-Open Cultivation Systems.
Cell Growth Kinetics -Introduction -Growth patterns and kinetics in batch culture - growth phases - effect of factors: oxygen supply - heat generation.
Fermentation Technology
What do plants use the energy from respiration for? What is the product of anaerobic respiration? The graph above shows how Fred’s heart rate changed during.
Bioreactors.
Chapter 6: Plant and Animal Cell Bioreactors
Industrial Biotechnology First generation processes  Fermentation based processes using ‘native’ organisms Wine- and beer-making Baking Second generation.
Chemical Engineering Department Government Engineering College
Lecture 9. Material Balance for Processes Involving Reaction.
Lecture 2: Advanced Growth Kinetics
TYPES OF FERMENTATION.
Multi-stage Chemostat System
Scale of Fermentation process:- Large Scale, Small Scale & Pilot Scale Fermentation Presented by: Neha Agrawal m.sc. 3rd sem.
Lignin to Adipic Acid By: Jose Cabrera, Amanda McAliney,
Optimal Reactor Configuration for Lactic Acid Production
Micro-organisms understand the role of yeast in the production of beer
Prof. Dr. Ir. Sri Kumalaningsih, M.App.Sc
Prof. Karkaz M. Thalij. PhD
MIC 303 INDUSTRIAL AND ENVIRONMENTAL MICROBIOLOGY
Cellular Respiration Section 9-3.
Growth & Metabolism of Micro-organisms
Bioreactors Engineering
Basis Operations in Industrial Fermentations
Large-Scale Production of Recombinant Proteins Lecture 6
4. Basis Operations in Food Fermentations (Biotechnology)
Bioreactors What two type of bioreactors have we discussed in Chapter Six? Batch and Chemostat (CSTR). What are the characteristics of each type of these.
Production of penicillin
Learning Outcomes By the end of this lesson: Define respiration
Presentation transcript:

Bioreactor Analysis and Operation Chapter 9&10 (textbook) Overview of bioreactors Modified batch and continuous reactors Scale up/down Immobilized cell systems Operation consideration Sterilization Bioreactor Instrumentation and control

Bioreactor Analysis and Operation Fermentation processes - solid state: water content: 40~ 80%, mostly mold fermentation on agriculture products and food: rice, wheat, barley, corn and soybean. e.g.rotary drum fermentator - submerged systems: water content > 95% e.g. bacteria, yeast.

Bioreactor Analysis and Operation Overview of bioreactors for submerged system - Classification: operation modes: - batch: stirred tank - continuous: chemostat, fluidized-bed - modified types of the above modes: fed-batch, chemostat with recycle, multi-stage continuous reactors Oxygen supply: - aerobic: airlift - anaerobic Form of biocatalyst: free cell (enzyme) immobilized cell (enzyme) packed-bed, membrane reactor

Industrial Bioreactor Glacial Lakes Energy in Watertown, South Dakota 47+ million gallon per year ethanol production .

World's Largest Industrial Fermenter (Chem. Eng. News,10-Apr-78) The fermenter is 200' high and 25 ft diam.

Requirements for Cultivation Methods Biomass concentration which must remain high Sterile conditions being maintained Effective agitation so that the distribution of substances in the reaction is uniform Heat removal Creation of the correct shear conditions - high may damage cells, low may lead to flocculation or growth on wall and stirrer

Chemostat with Cell Recycle - To keep the cell concentration higher than the normal steady-state level in a chemostat. - To increase the cell and growth-associated product yield. - For low-product-value processes: e.g. waste treatment. fuel ethanol X1, S v ,

Chemostat with Cell Recycle Cell mass balance (qp=0, kd ≈0, X0=0, Monod equation is applied): where µ=µnet=µg-kd A chemostat can be operated at dilution rates higher than the specific growth rate when cell recycle is used.

Chemostat with Cell Recycle When kd=0

Chemostat with Cell Recycle Mass balance on growth-limiting substrate (qp=0, kd ≈0, X0=0, Monod equation is applied):

Chemostat with Cell Recycle No recycle µm=1.00h-1, S0=2.0g/l, Ks=0.01 g/l, Yx/s=0.5 g/g, concentration factor C=2.0 and recycle ratio α=0.5

Chemostat with Cell Recycle Cell mass balance around the cell separator. X1, S v

Example-Chemostat with Cell Recycle Organisms are cultured in a chemostat with cell recycle. The system is operated under glucose limitation. Determine specific growth rate μnet, S in the reactor effluent, cell concentration in the recycle stream (CX1) and in the concentrator effluent (X2) If the concentrator has a volume of 300 mL, what is the residence time in it?

Fed-Batch Nutrients are continuously or semi-continuously fed, while effluent is removed discontinuously. - overcome substrate inhibition or catabolite repression by intermittent feeding of substrate by maintaining low substrate concentration. for production of secondary metabolites e.g. antibiotics, lactic acid, E. Coli making proteins from recombinant DNA technology.

Fed-Batch Analysis of fed-batch with substrate continuously fed and no output: t=0, V0=0, F is constant. Volume: At quasi steady state, S added=S consumed, X, S, P concentrations are constant. Cell mass balance: (Monod growth model applied)

Fed-Batch M where S≈0 assuming X≈Xm M where Xt=Xt0 at t=0

Fed-Batch (g) qp (i.e. g product/g cells-min) at Pt=Pt0, t=0

Fed-Batch

Example: Fed- Batch In a fed-batch culture operating with intermittent addition of glucose, the value of V is given at time t=2hr, when the system is at quasi-steady state. Determine V0. At t=2 hr, find S, X and Xt and P at quasi-steady state if qp=0.2 g product/g cells-h, P0=0.