WinIso 2D The software solution calculates heat flows in any two-dimensional cross sections. These are the basics to determine the heating demands and loss and the prevention of moisture in building components and its surface.
WinIso 2D the programm calculates: temperature, isothermal lines, heat flows heat transfer coefficient of single components and of the hole building component surface temperature thermal bridges value Ψ condensate water in the building components temperatur factor fRsi
CAD - Import you can import CAD-drawings with the DXF-Converter or you can draw cross sections in the program
material the project is defined by filling the cells with project material material with thermal and hygrothermal characteristics are saved in the material data base you can add or change materials
illustration you can define or accept climate conditions shows the temperature distribution shows the heat flows
illustration isothermal lines simplify the interpretation
fRsi and surface temperature you can get the suface temperature and the fRsi by one click
condensate water to check the condensate water in the building components or on the surface press
U - value it is possible to show u-value and temperature distribution at every point of the cross section
Uf- und Ψ - value Uf-value and Psi-value are calculated according to EN10077
Uw - value the Uw-value can be calculated with Ug, Uf, Ψ and the measurements of the Window
printout cross section in any illustration complete documentation of all values, materials, temperatures and U-values personal title block can be inserted
for further information www.winiso2d.de Sommer Informatik GmbH Sepp-Heindl-Str. 5 D-83026 Rosenheim Tel.: +49 (0)8031 2488-1 Fax: +49 (0)8031 2488-2