professional TELECOM solutions Corporate Presentation – Jan 2012

Who we are? the accumulation of minor adaptive traits, over time, leads to new species C. Darwin Telecom Experts since 1983

Network Designers (Hardware, Firmware, Software) ALBEDO Telecom is a manufacturer of test solutions, measurement and monitoring solutions. We provide telecom operators tools to install, troubleshoot and maintain those infrastructures that support voice, video, internet and data applications. ALBEDO core expertise range from SyncE, GbE, E1, TDM, Jitter/Wander, QoS, and SLA technologies that we have implemented on WAN Emulators, Filtering / Aggregation Taps, hand-held Testers, and Monitoring Systems.

QoS / SLA Monitoring & Certification ITU-T Y Bandwidth Profile - Availability

GbE Taps Filtering, Aggregation, Regeneration capture / drop / storage

IPTV, VoIP, SDH, C-Ethernet, QoS, Synchronization, FTTH Interconnectivity Labs

IPTV consultancy, integration, roll-out, approval, monitoring.

VoIP consultancy, roll-out, approval, troubleshooting.

Synchronization – Jitter – Wander

Emulation of Mobile Network Conditions

BA ONE-WAY measurements: delay, jitter, loss, error, …

T&M hand-held testers for E1, SDH, Jitter/Wander, Datacom, IP, VoIP, IPTV, Ethernet, SyncE, 10G

With today's ever-changing and always demanding market, ALBEDO Telecom continues generating high quality results which often surpasses our customer's expectations by means of a qualified team of engineers and the most advanced tools.

Albedo is a global supplier of customized laboratories capable to execute interoperability test suites to ensure the continuity – and growth – of telecom equipment based on VoIP, IPTV, C- Ethernet, NG-SDH, EFM, and FTTH. Test results make it easy your organization to decide if the products meet your business requirements, and if they do, you can use our test reports to make sure that the equipment gets seamlessly integrated into your network. VoIP / IPTV INTEROPERABILITY LABS

The AT-2048 is the ultimate E1 tester just designed for field engineers that are installing, commissioning and trouble-shooting E1, Wander, Pulse Mask, and Datacom circuits. The AT-2048 analyzer is a rugged hand set, equipped with a full color GUI, designed for field use in the analysis and maintenance of telecom circuits. You may need to test framed, unframed, signaling, drop and insert Nx64Kbps, data, and jitter into any time slot. AT-2048 hand held tester

NetStorm emulates unified networks including those perturbances typical of packet networks. The objective is to test applications, devices and protocols that should be tolerant with packet delay, jitter, loss, duplication, reordering, error and bandwidth variations. NetStorm is a tool for developers debugging new IP equipment, acceptance test laboratories, design and configuration of unified Ethernet/IP networks, QoS/QoE test, HDTV, IPTV, VoIP, Internet radio, Video Streaming, VPN data, High Speed Internet, Satellite and Undersea traffic applications. All of then may suffer the network conditions found on the Internet and enterprise. ALBEDO NET.STORM

ALBEDO Net.Shark is an FPGA tap that improves Wireshark performance by means of hardware programmable filters. It can capture packets at wire-speed (2 x GbE) something that Wireshark CPUs can't do without delaying the stream. Powerful and lightweight, allowing hours of continuous operation with batteries. ALBEDO NET.SHARK

ALBEDO Ether.Giga is a field Gigabit Ethernet / IP tester, and full equipped with all the features required for the installation, maintenance, and troubleshoot Ethernet and IP infrastructures and applications. ETHER.GIGA

ALBEDO Ether.Sync is ALBEDO Ether.Giga is a field Synchronous Gigabit Ethernet / IP tester, and full equipped with all the features required for the installation, maintenance, and troubleshoot Ethernet and IP infrastructures and applications, including the SyncE clock requirement such as Jitter and Wander. ETHER.SYNC

ALBEDO Ether.Genius is ALBEDO Ether.Giga is a field Synchronous Gigabit Ethernet / IP tester, and full equipped with all the features required for the installation, maintenance, and troubleshoot Ethernet and IP infrastructures and applications, including the SyncE clock requirement such as Jitter and Wander. Simultaneously this is an E1 tester just designed for field engineers that are installing, commissioning and trouble-shooting E1, Wander, Pulse Mask, and Datacom circuits ETHER.GENIUS

The provision of telecommunications services should be subject to a formal agreement to bind customer and supplier by means of a contract that describes the service which will be the reference framework for conflict resolution by means of the mechanisms of monitoring, the management of events, description of fees and penalties. The milestone for the SLAs has been the adoption of Ethernet / IP /MPLS as a unified transport network. NET AUDIT

Thats all