Class F3P Indoor Aerobatic Power Model aIRCRafts Schedule F3P – AF-15

( not judged, not scored ) Take-off procedure ( not judged, not scored ) Security line

F3P-AF-15. 01: Knife Edge Golf Ball with 3/4 roll up, half roll F3P-AF-15.01: Knife Edge Golf Ball with 3/4 roll up, half roll integrated, 1/4 roll down ½ roll integrated ¼ roll ¾ roll F3P-AF-15.01.01

F3P-AF-15. 01: Knife Edge Golf Ball with 3/4 roll up, half roll F3P-AF-15.01: Knife Edge Golf Ball with 3/4 roll up, half roll integrated, 1/4 roll down ½ roll integrated ½ roll is integrated on circular flightpath of the ¾ loop. ¾ roll and ¼ roll on middle of the lines. All radii are equal. ¼ roll ¾ roll 45° During the knife edge flight the wing must be in the vertical plane. F3P-AF-15.01.01

F3P-AF-15.02: Vertical Eight

F3P-AF-15.02: Vertical Eight All radii are equal. F3P-AF-15.02.02

F3P-AF-15. 03: Knife Edge Flight Combination with 1/4 roll, F3P-AF-15.03: Knife Edge Flight Combination with 1/4 roll, roll, 1/4 roll Part rolls must have the same roll rate. Between rolls and part rolls in opposite direction there must be no line. F3P-AF-15.03.01

F3P-AF-15.04: Figure 6 with stall turn, 1/2 roll down Pivot on CG Stop before pivot ½ roll F3P-AF-15.04.01

F3P-AF-15.04: Figure 6 with stall turn, 1/2 roll down Pivot on CG ½ roll F3P-AF-15.04.02

F3P-AF-15.04: Figure 6 with stall turn, 1/2 roll down Pivot on CG Two wing spans or more – zero points! ½ roll ½ roll on middle of the line. All radii are equal. F3P-AF-15.04.03

F3P-AF-15. 05: Cubic Top–Hat with 3/4 roll up, 1/4 roll down, F3P-AF-15.05: Cubic Top–Hat with 3/4 roll up, 1/4 roll down, 1/2 roll, 3/4 roll up, 1/4 roll down ¼ roll ¾ torque roll ¼ roll ¾ torque roll ½ roll F3P-AF-15.05.01

F3P-AF-15. 05: Cubic Top–Hat with 3/4 roll up, 1/4 roll down, F3P-AF-15.05: Cubic Top–Hat with 3/4 roll up, 1/4 roll down, 1/2 roll, 3/4 roll up, 1/4 roll down ¼ roll ¾ torque roll ¼ roll ¾ torque roll ½ roll All radii are equal. ¾ torque rolls, ¼ rolls and ½ roll on middle of the lines. F3P-AF-15.05.02

F3P-AF-15. 06: Half Horizontal Square Circle on Corner with F3P-AF-15.06: Half Horizontal Square Circle on Corner with ¼ roll, ½ roll, ½ roll, ¼, roll ¼ roll ½ roll ½ roll ¼ roll F3P-AF-15.06.01

F3P-AF-15. 06: Half Horizontal Square Circle on Corner with F3P-AF-15.06: Half Horizontal Square Circle on Corner with ¼ roll, ½ roll, ½ roll, ¼, roll ½ rolls on middle of the line. ¼ roll ½ roll During the knife edge flight the wing must be in the vertical plane. ½ roll ¼ roll All radii are equal. F3P-AF-15.06.02

F3P-AF-15. 06: Half Horizontal Square Circle on Corner with F3P-AF-15.06: Half Horizontal Square Circle on Corner with ¼ roll, ½ roll, ½ roll, ¼, roll ¼ roll Option ½ roll ½ roll ¼ roll F3P-AF-15.06.03

F3P-AF-15. 07: Eye-Catcher with two 3/4 rolls integrated in F3P-AF-15.07: Eye-Catcher with two 3/4 rolls integrated in opposite directions ¾ roll integrated ¾ roll integrated F3P-AF-15.07.01

F3P-AF-15. 07: Eye-Catcher with two 3/4 rolls integrated in F3P-AF-15.07: Eye-Catcher with two 3/4 rolls integrated in opposite directions Roll reversal is immediate. ¾ roll integrated ¾ roll integrated Rolls must be in opposite directions. Al radii are equal. ¾ rolls must be integrated on circular flight path of the ¾ loops. F3P-AF-15.07.02

F3P-AF-15. 08: Half Horizontal Hour Glass with ½ roll down, roll up F3P-AF-15.08: Half Horizontal Hour Glass with ½ roll down, roll up ½ roll down ½ roll roll ½ roll F3P-AF-15.08.1

F3P-AF-15. 08: Half Horizontal Hour Glass with ½ roll down, roll up F3P-AF-15.08: Half Horizontal Hour Glass with ½ roll down, roll up ½ roll down ½ rolls and roll on middle of the lines. 45° roll ½ roll ½ roll All radii are equal. F3P-AF-15.08.2

F3P-AF-15. 09: Horizontal Triangular Circle with 1/4 roll, F3P-AF-15.09: Horizontal Triangular Circle with 1/4 roll, 1/2 roll integrated, roll, 1/2 roll integrated, roll, 1/2 roll integrated, 1/4 roll ½ roll outside integrated roll inside roll inside ½ roll outside integrated ¼ roll F3P-AF-15.09.01

F3P-AF-15. 09: Horizontal Triangular Circle with 1/4 roll, F3P-AF-15.09: Horizontal Triangular Circle with 1/4 roll, 1/2 roll integrated, roll, 1/2 roll integrated, roll, 1/2 roll integrated, 1/4 roll ½ roll outside integrated roll inside roll inside ½ roll outside integrated ¼ roll F3P-AF-15.09.02

F3P-AF-15. 09: Horizontal Triangular Circle with 1/4 roll, F3P-AF-15.09: Horizontal Triangular Circle with 1/4 roll, 1/2 roll integrated, roll, 1/2 roll integrated, roll, 1/2 roll integrated, 1/4 roll All sides are of equal length, all angles are 60°. During the knife-edge the wing must be in the vertical plane. All radii are equal. All ½ rolls are outside and integrated on the flightpath in the corners. All full rolls are inside and on middle of the lines. F3P-AF-15.09.03

F3P-AF-15.10: Tail Slide with two consecutive 1/8 rolls up

F3P-AF-15.10: Tail Slide with two consecutive 1/8 rolls up Stick back tail slide. F3P-AF-15.10.02

F3P-AF-15.10: Tail Slide with two consecutive 1/8 rolls up 1/8 rolls centered on middle of the line. 1/8 roll 1/8 roll Between part rolls in opposite direction there must be no line. Flipover = 0 points. All radii are equal. F3P-AF-15.10.03

F3P-AF-15. 11: Roll Combination with 1 3/4 roll, 1 3/4 roll in F3P-AF-15.11: Roll Combination with 1 3/4 roll, 1 3/4 roll in opposite direction 1 ¾ roll 1 ¾ roll Between rolls and in opposite direction there must be no line. F3P-AF-15.11.01

( not judged, not scored ) Landing sequence ( not judged, not scored ) security line Peter Uhlig, November 2013