Air Canada Technical Services

Slides:



Advertisements
Similar presentations
Superior Turbine Solutions, Inc. Steam Path Capabilities Rotor Repair
Advertisements

Air Canada Technical Services
Air Canada Technical Services
Superior Turbine Solutions, Inc. Steam Path Capabilities Diaphragm Repairs Minor Repairs Major/Minor Repairs Major Repairs Sidewall Repairs Horizontal.
Steering Systems Chapter 44.
J.P. Langston Brake Retrofit
Engineered Isostatic Ceramics
Brake System Diagnosis and Repair
JET ENGINE MECHANICAL ARRANGEMENT
FAA Repair Station #VTVR906K EASA #
5 Engine Blocks. 5 Engine Blocks Learning Objectives Explain how to gain access to the components in a stationary engine. Explain how to remove a mobile.
Service Training PV Series 42 PVplus
JET PROPULSION Part 3 The Jet Engine.
INTRODUCTION TO THE SERVICE RIFLE AND MAINTENANCE 1.
860 21/2”-10”. Modification Overview  Production of the 2½” – 10 sizes began in  Lead free version (LF860) was introduced in Parts do not.
Tire Servicing Program. Agenda WorkSafeBC Requirements Definitions Responsibilities General safety.
The art of Engineering TURBINE PARTS. The art of Engineering TURBINE PARTS Valve Parts A. Stems, Disc, Seats B. Crosshead Assembly, Crosshead Bushings,
Aviation Repair & Overhaul
1 Hose and Lines. 2 High side / low side System with an expansion valve High SideLow Side Condenser Evaporator Receiver/Drier Compressor Expansion valve.
© 2012 Delmar, Cengage Learning Ordering Parts, Short and Long Blocks, and Engine Assembly Chapter 55.
MACHSEAL 101. Design Information Stationary rotary face seal that utilizes axial spring force to positively mate the optically flat seal face against.
J. H. ChrzanowskiNSTX TF Flag Joint Design Review1 NSTX TF Flag Joint Design Review Fabrication and Assembly April 10, 2003 By: James H. Chrzanowski.
Chapter 17 Torque Converters.
Propeller Shaft survey
DIESEL ENGINE ENGINE DEVELOPMENT DIRECTORATE
Automotive Bearings and Sealants
Genex Turbine Technologies LLC 135 Sheldon Road Manchester, Connecticut / USA P: +1 (860) / F: +1 (860)
…an innovative shell and tube heat exchanger with an exceptionally high heat transfer coefficient for industrial fluid cooling and air conditioning.
© 2015 Cengage Learning. All Rights Reserved. May not be scanned, copied, duplicated, or posted to a publicly accessible website, in whole or in part.
Bearings -Disassembly &Assembly Nizwa College of Technology.
This task covers: a. Removal b. Cleaning and Inspection c. Installation INITIAL SETUP: Equipment Condition  Front axle spindle removed. Materials/Parts.
place where air is expanded and accelerated rearward by the turbine, creating energy needed for reaction of the aircraft.
INTRODUCTION Definition:
2010 PWCS Symposium Presentation PRESENTATION BY MIKE GARSKE, JOHN GIGLIO.
INTER-LAKES BASES PRODUCTS. MODEL B-75 MACHINE BASE B-75 Model with panels and doors.
Modern Automotive Technology PowerPoint for by Russell Krick
Flat Saw Training. Flat Saw Sizes –Low Horsepower Blade diameters range from 8” (200mm) to 18” (450mm) Power ranges from 4 to 25 horsepower.
825, 825Y, 825YD 21/2”-10”. Modification Overview  825- ( ) Cast iron body- Threaded in seats- Internal check parts are epoxy coated iron. Old.
© 2012 Delmar, Cengage Learning Manual Transmission Diagnosis and Repair Chapter 72.
994 2½ ”- 10”. Modification Overview  Production for the 994 began in 1999 and is current.
Fasteners and Thread Repair
Note location of different length bolts
LF866 2½”-10”. Product Overview  Production of the 2½” – 10” sizes began in  The LF866 utilizes a Type 2 bypass (Model LF619 single check).
Model 12 Intek Horizontal OHV
Tim Mathis Director of Engineering, Components
Motor Mounting MECH1200 Foot Mount: Simple and common Tabs or feet that are attached at the four corners of the motor and attaches to a bedplate. Sometimes.
Tim Marker Discussion of Burnthrough Test Method for Aircraft Thermal Acoustic Insulation Blankets FAA Technical Center.
Genex Turbine Technologies LLC 135 Sheldon Road Manchester, Connecticut / USA P: +1 (860) / F: +1 (860)
MICE RF Coupler Modifications Update 4/30/2015 Allan DeMello.
USCMS Pixel PMG, Nov 29, Mechanics Status Disks, ½ Service Cylinders Installation USCMS FPIX FNAL PMG Joe Howell Bruno Gobbi Nov. 29, 2006.
TASK Maintain an M16-Series Rifle. TASK Maintain an M16-Series Rifle.
Engine Lubrication Systems
ENGINE MODE CODES.
Manual Drivetrains and Axles
Automotive Engines Theory and Servicing
System One Pumps S1-101 Construction and Features
MAGM 262 Hydraulic Seals Mr. Conrado.
Engine Lubrication Systems
826YD 21/2”-10”.
OBJECTIVES Discuss the procedure recommended for brake drum removal.
Automotive Engines Theory and Servicing
PROTOTYPE CENTRIFUGAL FUEL CELL
“V” MACHINE PROBLEMS & SOLUTIONS
850 2½”-10”.
LF856 2½”-10”.
880V 21/2”-10”.
856 2½”-10”.
Pipe fitting Threads on pipe fittings are tapered and rely on the stress generated by forcing the tapered threads of the male half of the fitting.
Automotive Engines Theory and Servicing
Automotive Engines Theory and Servicing
Presentation transcript:

Air Canada Technical Services Engine Component Repair Capabilities CFM56-5A Engines

Engine Components - Repair Development Expertise With over 60 years of experience in engine maintenance, Air Canada Technical Services’ ability to reduce your engine maintenance costs is second to none. We have a strong engineering team dedicated specifically to address your needs for engine component repairs. You send the damaged component to us and we fix it. Simple as that! Our expertise in engine component repair development has resulted in significant savings for Air Canada and our numerous customers over the years. We can offer you our existing repairs or develop one unique to your requirements and have it approved by Transport Canada (AE- 100) or by an FAA/DER (8110-3). You can’t afford to wait any longer. Let us show you what we can do.

CFM56-5A HPC Front Stator Assy ATA 72-32-00 CFM56-5A HPC Front Stator Assy Typical P/N’s 1318M75G09 Major EM Repairs Performed R001-Repair Key Locked Insert. R002- Weld Repair Rotation Stop. R003- Repair Boroscope Port Thread. R004- Repair Fwd or Aft Flange Rabbet Diameter. R005-Replace Vane Sector Stop. R006-T Slot Repair. R007- Crack Repair Titanium Case. R008- Repair Flow Path. R009-Repair Threaded Holes. R010-repair Boroscope Port Threads. R011-Crack Repair Boroscope Boss. R012- Heat Treat Temper Repair. R014- Repair Stage 4 -5 Vane Rails. Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A HPC Rear Stator Assembly ATA 72-33-00 CFM56-5A HPC Rear Stator Assembly Typical P/N’s 1316M51G01 Major EM Repairs Performed R001-Repair Boroscope Port Threads. R002- Replace Welded Anti-Rotation Lugs. R003/4-Repair Aft Flange Rabbit Diameter. R005-Apply Rub Coat. R006- Repair Forward Lip Outer Diameter. R007-Weld Repair Cracked Incoloy 903 Cases. R008-Weld Repair Cracked Incoloy 907/909 Cases. R009-Weld Repair Cracked Incoloy 909 Cases. SB72-126 Modify Holes Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A Fuel Manifold Typical P/N’s Major EM Repairs Performed ATA 72-41-04 CFM56-5A Fuel Manifold Typical P/N’s 9393M59G05 Major EM Repairs Performed Inspect and Clean Blend Repair Nicks and Scratches Apply SB 73-133. Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A Combustion Chamber Assembly (Bolted Dome) ATA 72-42-00 CFM56-5A Combustion Chamber Assembly (Bolted Dome) Typical P/N’s 1493M73G01 Major EM Repairs Performed Disassemble,Inspect,Repair or Replace Sub Components As Required. Apply Thermal Barrier Coating. New Nuts and Bolts. All Additional Replacement Parts Charged Separately. Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A Combustor Outer Cowl ATA 72-42-01 CFM56-5A Combustor Outer Cowl Typical P/N’s 9531M61G06 1968M59G01 (SB72-576) Major EM Repairs Performed R001- Inspect and Rework Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A Combustor Inner Cowl ATA 72-42-01 CFM56-5A Combustor Inner Cowl Typical P/N’s 9531M11G02 Major EM Repairs Performed R002- Inspect and Rework Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A Combustor Dome (Bolted) ATA 72-42-02 CFM56-5A Combustor Dome (Bolted) Typical P/N’s 1317M58G01 Major EM Repairs Performed R001-Weld Repair, Re-size, Stress Relief. R002-Primary Swirler Nozzle Repair/Replacement. R003-Repair Swirler Anti-Rotation Tangs. R005-Remove Thermal Barrier Coating R006-Apply Thermal Barrier Coating R007-Replace Secondary Nozzle Flange R008-Replace Primary Swirler Retainer. R009-Weld Repair Bolt Holes. R010-Deflector Replacement. R012-Swirler Replacement. R013-Resize Dome. Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A Combustor Inner Liner ATA 72-42-03 CFM56-5A Combustor Inner Liner Typical P/N’s 1317M57G02 Major EM Repairs Performed R001-Weld Repair,Resize Stress Relief. R002-DTW Repair of Inner Liner Seal R003-Remove Nut Plates. R004-Replace Nut Plates. R005-Remove Thermal Barrier Coating R006-Replace Thermal Barrier Coating R007-Repair Liner Bolt Holes. R008-Weld Patch Repair. R009- Repair Inner Liner Aft Support Ring. R010-Repair Bolt Holes. R011-Support Leg Weld Repair R012-Apply Thicker Thermal Barrier Coating Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A Combustor Outer Liner ATA 72-42-04 CFM56-5A Combustor Outer Liner Typical P/N’s 1317M56G03 Major EM Repairs Performed R001- (Only for P# 1317M56G03/G04) R002-Aft Seal Flange restoration. R003- Remove Thermal Barrier Coating R004-Replace Thermal Barrier Coating R005-Remove Lug Ring R006- Replace Lug Ring R007-Repair Bolt Holes. R008-Weld, Resize, Stress Relief. R009- Igniter Sleeve Ferrule Repair/Replacement. R012-Weld Patch repair. R013-Repair Lug Ring Aft Surface. R014-Replace Igniter Ferrule. R015-Weld Repair Aft Seal Flange. R016-Apply Thick Thermal Barrier Coating R017-Igniter Port Local Sizing Repair. R019-Replace Outer Liner Support Ring. Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A HPT Shroud Support ATA 72-53-02 CFM56-5A HPT Shroud Support Typical P/N’s 1358M15G06 Major EM Repairs Performed R004-Repair Forward Flange Wear R006-Restore Worn Mid-Shield R011-Repair Forward Rail R012-Resize Support R018-Weld Wear on Vane Mount Face R019-Restore Front Flange Dimensions R020-Restore Aft Flange Dimensions R021-Repair Surface and Face SB72-227 Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A Air Impingement Manifold ATA 72-53-05 CFM56-5A Air Impingement Manifold Typical P/N’s 1319M81G02 Major EM Repairs Performed R003-Plasma Coat. R004- Weld Repair Splash Plate. R007-Weld Repair Joint Braze. R009-Weld Repair Aft Outer Tube Support. R010-Plasma Repair Forward Tabs. R013- Weld Repair Axial Cracks. Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A L. P. Turbine Shaft Typical P/N’s Major EM Repairs Performed ATA 72-55-01 CFM56-5A L. P. Turbine Shaft Typical P/N’s 336-009-705-0 Major EM Repairs Performed R001- Replace Paint R002- Restore Aft Diameter R006- Restore #4 Diameter R008- Restore #5 Diameter R010- Restore LPT Diameter Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/

CFM56-5A Turbine Rear Frame ATA 72-56-01 CFM56-5A Turbine Rear Frame Typical P/N 336-028-601-0 Major EM Repairs Performed R001 To R005 Replace Details R006- Restore Face R007- Restore Diameter R008- Restore Face R009- Replace Tube Fittings R011 To R013 Restore Faces R015,016- Restore diameters R017- Replace Tube R018- Replace Tube R020- Weld Repair Cracks ACR01- Blend Repair Cracks (DER # RDE 50001 ) ACR02- Weld Repair Cracks (DER# RDE 50002 ) R022- Stud Replacement. R023- Install Bushings R025- Install Bushings R026-Replace Clevis Bushes. R027-Replace Heat Shields. Note: ACR01 and ACR02 are in-house developed repairs based on R021. Air Canada Technical Services Centre Air Canada 1026, C.P. 9000, Dorval, Quebec H4Y 1C2 - Canada Toll Free Canada & US: 1-866-833-3033 / Outside Canada & US: 1-800-8008-0066 / Telephone: 1-514-422-7010 www.aircanada.ca/acfamily/technical/