Eye and Pen currently support: EyelinkII, Eyelink 1000 (S.R. research, Ltd.) i-ViewX HED (SensoMotoric Instruments GmbH, S.M.I.) ASL 504 (Applied Science Laboratories, A.S.L.) [ support for ASL5000/6000 series is on the way ] EyePuter (Alphabio ) If using an S.R. Research eyetracker, install the Display PC Software on the computer running Eye and Pen (includes required librairies). Eyelink and i-ViewX require an Ethernet cable and a network adapter. ASL504 and EyePuter require a serial cable. Install each eye tracker following its manufacturers manual. Eye and Pen and eye tracking devices April 2012, Mshs, University of Poitiers, France

Using the eye tracker in Eye and Pen 1. Configure the eye tracker as an acquisition device Select the Configuration | Acquisition menu April 2012, Mshs, University of Poitiers, France

1. a. Select the eye tracker model / brand Tick this box to enable eye tracker recording Tablet is not a true eye tracker, but the ability to record pen movements data (even when pen is in the air above the surface) like if it was an eye tracker. This model has no options to set. Click this button to set options for this eye tracker April 2012, Mshs, University of Poitiers, France

1. b. Options for EyelinkII Only one eye will be recorded, Eye and Pen does monocular Allows Eyelink host to record data in its own files and format Select a color Calibration uses a disk with a hole in the center Hint: choose a color close to the global color of what you will display during experiment (pupil dilatation control). Unique calibration point used to check calibration validity during experiment Selects the center of the (current) screen Hint: drift test can be invoked by script at any time during an experiment April 2012, Mshs, University of Poitiers, France

1. c. Set eye tracker options When ticked, starting the eye tracker will automatically launch its own calibration procedure ( not supported by ASL and Eyeputer). Tick this box to discard successive identical data (coordinates) Must be set by hand (most eye tracker do not return this information) April 2012, Mshs, University of Poitiers, France

1. d. Set calibration options You will calibrate using a screen or an LCD tablet You will calibrate using a classic tablet: a calibration on paper should be performed Calibration takes place in a window (can be smaller than the screen) Select the whole screen for calibration When ticked, Eye and Pen will provide a window for calibration (required for Eyelink) A picture can be set on screen Eye and Pen will wait until the ESC key is pressed to end the calibration procedure April 2012, Mshs, University of Poitiers, France

2. Testing the eye tracker Select the Device tests | Eye tracker | Visual menu. gaze coordinates gaze location is realized under the shape of a cross on the screen April 2012, Mshs, University of Poitiers, France