BAE4400 Topics in Processing

Slides:



Advertisements
Similar presentations
CHE Pumps and gas moving equipment  For the fluid flow from point to another, a driving force is needed.  The driving force may be supplied by.
Advertisements

Pumps, Compressors, Fans, Ejectors and Expanders
Our Plan – Weeks 6 and 7 Review energy relationships in single pipes Extend analysis to progressively more complex systems – Pipes in parallel or series.
Advanced Pump Fundamentals Agenda
Pumping Plants. Types of Pumps Positive displacement pumps – Rotary (gear, screw, etc.) – Reciprocating (piston, diaphragm, etc.) – Used as injection.
The Centrifugal Pump.
1 Dr. C. L. Jones Biosystems and Ag. Engineering Topics in Processing Materials Handling.
MER Design of Thermal Fluid Systems Pumps and Fans Professor Anderson Spring Term
Pumps Machine that provides energy to a fluid in a fluid system.
Pumps.
Fluid Mechanics and Applications MECN 3110
After successfully completing this lesson, you will be familiar with:  Head-Flow Curves  Power-Flow Curves  Net Positive Suction  Head  Cavitation;
Conservation of Mass, Flow Rates
Components of Centrifugal pumps
Pumping System A major ancillary item Considerations
Fans Part 1 Reading: Chapter 5 in Henderson/Perry
1 Pumping Learning Outcomes Upon completion of this training one should be able to: Know what are the key pump components and how they impact pump.
So Far: Mass and Volume Flow Rates Reynolds No., Laminar/Turbulent Pressure Drop in Pipes Flow Measurement, Valves Total Head, Pump Power, NPSH This Week:
Pump Selection Centrifugal - low P (
Pumps and Lift Stations. Background Fluid Moving Equipment Fluids are moved through flow systems using pumps, fans, blowers, and compressors. Such devices.
Things to grab for this session (in priority order)  Pencil  Henderson, Perry, and Young text (Principles of Process Engineering)  Calculator  Eraser.
Fluid Mechanics and Applications Inter American Chapter 7 MEEN 3110 – Fluid Mechanics and Applications Fall Lecture 07 CENTRIFUGAL PUMP CHARACTERISTICS.
PUMPS, VALVES, & FANS …Moving fluids Objectives Comprehend the basic construction and application of valves used Comprehend the basic construction and.
Positive Displacement Pumps.
Process Design CEN 574 Spring 2004
PRESENTED BY : N.SRIKAUSIGARAMAN
Parul Institute of Engineering & Technology Subject Code : Name Of Subject : Fluid Power Engineering Name of Unit : Pumps Topic : Reciprocating.
Urban Storm Drain Design: Pump Performance Curves.
1 CEE 426 Wastewater Treatment Plant Design November 12, 2012 Thomas E. Jenkins President JenTech Inc N. Elm Tree Road Milwaukee, WI
Introduction to Energy Management
CE 3372 Water Systems Design
Things to grab for this session (in priority order)  Pencil  Henderson, Perry, and Young text (Principles of Process Engineering)  Calculator  Eraser.
Parul Institute of Technology
FLUID FLOW FOR CHEMICAL ENGINEERING Dr Mohd Azmier Ahmad Tel: +60 (4) EKC 212 CHAPTER 8 (Part 5) TRANSPORTATION SYSTEM.
Power Consuming Fluid Machines BY Dr. P M V Subbarao Mechanical Engineering Department I I T Delhi Small Things Make Huge Events possible!!!
System One Pumps S1-200 Centrifugal Hydraulics
Centrifugal Pumps Operation, Selection, Types, Performance
CENTIFUGAL PUMP OPERATION
Continental AG Manufacturing Facility
Deptt. of Irrigation and Drainage Engineering, Dr. PDKV, Akola
RECIPROCATING MACHINES
CE 3372 Water Systems Design
Unit No.-06 Reciprocating Pump Fluid Mechanics And Machinery
CENTRIFUGAL PUMP OVERVIEW
Chemical Engineering Explained
Chapter 16 A: PUMPS AND SYSTEM EFFECTS
Pumps Outline: Where are pumps used
Process Equipment Design and Heuristics - Pumps
Pumps – Lectures 1 Outline: Where are pumps used
PUMPS The Goals Describe how centrifugal and positive-displacement pumps operate and common applications. Calculate system head requirements. Determine.
Pumps – Lectures 1 Outline: Where are pumps used
Lecture 15 TDH and NPSH Dr. C. L. Jones Biosystems and Ag. Engineering.
Fans Reading: Chapter 5 in Henderson/Perry
Fans Part 1 Reading: Chapter 5 in Henderson/Perry
Pumps – Lectures 1 & 2 Reading: Chapter 4 in Henderson/Perry Handouts:
BAE4400 Topics in Processing
CE 356 Elements of Hydraulic Engineering
Pumps and Lift Stations
Fans Part 1 Reading: Chapter 5 in Henderson/Perry
Pumps – Lectures 1 Outline: Where are pumps used
Fans Part 1 Reading: Chapter 5 in Henderson/Perry
Review from Lecture 1: Pumps
Fans Part 1 Reading: Chapter 5 in Henderson/Perry
Review from Lecture 1: Pumps
Review from Lecture 1: Pumps
Performance Curves Dr. C. L. Jones Biosystems and Ag. Engineering.
Pumps and pumping station
Presented By: Vinod Dahiya Lecturer Mechanical Engg. RGGP Narwana.
Introduction to Fluid Mechanics
Hydraulic Pump Power Power = rate of conversion of energy.
Presentation transcript:

BAE4400 Topics in Processing Fall 2006 August 22 through September 21 1 hour credit Dr. C. L. Jones Biosystems and Ag. Engineering

Review from Lecture 1: Pumps Difference between pumps, fans, and compressors Mechanical Efficiency Dr. C. L. Jones Biosystems and Ag. Engineering

Review from Lecture 1: Pumps Two types Flow rates Pressure Flow characteristics Displacement - plunger - piston - rotary Low High Pulsating Dynamic - centrifugal - jet - airlift Steady Flow Dr. C. L. Jones Biosystems and Ag. Engineering

Review from Lecture 1: Pumps Recip Pumps have a crank, connecting rods, and pistons or plungers Rotary gear pumps provide more constant output Recip Pump eqtns. Dr. C. L. Jones Biosystems and Ag. Engineering

Review: Dynamic Pumps Centrifugal Relative simplicity Can handle fluids containing suspended solids Ease of maintenance…good for food products 2 parts: impeller and casing Radial, mixed, axial flow Dr. C. L. Jones Biosystems and Ag. Engineering

Performance Curves Dr. C. L. Jones Biosystems and Ag. Engineering

Performance Curves Dr. C. L. Jones Biosystems and Ag. Engineering

Review: Centrifugal Pump Affinity Laws Dr. C. L. Jones Biosystems and Ag. Engineering

Centrifugal Pump Affinity Laws Dr. C. L. Jones Biosystems and Ag. Engineering

Centrifugal Pump Fundamentals Static head: the height of a column of liquid Units: feet or meters Pump imparts velocity to liquid…velocity energy becomes pressure energy leaving the pump. Head developed = vel. energy at the impeller tips. Why do we use “feet” or “head” instead of “psi” or “pressure”? Pump with impeller D will raise a liquid to a certain height regardless of weight of liquid Dr. C. L. Jones Biosystems and Ag. Engineering

Converting pressure to head in feet Dr. C. L. Jones Biosystems and Ag. Engineering

Suction Lift Dr. C. L. Jones Biosystems and Ag. Engineering

Suction Head Dr. C. L. Jones Biosystems and Ag. Engineering

Static Discharge Head Static Discharge Head = vertical distance from pump centerline to the point of free discharge or the surface of the liquid in the discharge tank. Dr. C. L. Jones Biosystems and Ag. Engineering

Total Static Head Vertical distance between the free level of the source of supply and the point of free discharge or the free surface of the discharge liquid. Dr. C. L. Jones Biosystems and Ag. Engineering

Total Dynamic Suction Lift or Head (fluid below suction) Static suction lift - velocity head at suction + total friction head in suction line (fluid above suction) Static suction head + velocity head at pump suction flange – total friction head in suction line Velocity head = energy of liquid due to motion, Usually insignificant Dr. C. L. Jones Biosystems and Ag. Engineering

Total Dynamic Discharge Head Static discharge head + velocity head at pump discharge flange plus discharge line friction Total Dynamic Discharge Head (TH or TDH) (this is what we design for!!!) Total dynamic discharge head – total dynamic suction head (tank above suction)…. Or…. Total dynamic discharge head + total dynamic suction lift (tank below suction) Dr. C. L. Jones Biosystems and Ag. Engineering

TDH includes friction losses due to piping and velocity Total Dynamic Discharge Head (TH or TDH) (this is what we design for!!!) TDH includes friction losses due to piping and velocity Dr. C. L. Jones Biosystems and Ag. Engineering

One last item to consider… NPSH (net positive suction head) Dr. C. L. Jones Biosystems and Ag. Engineering

NPSHR Dr. C. L. Jones Biosystems and Ag. Engineering

NPSHA Dr. C. L. Jones Biosystems and Ag. Engineering

NPSHA Dr. C. L. Jones Biosystems and Ag. Engineering

Capacity, Power, Efficiency Capacity Q, gpm = 449 x A, ft2 x V, ft/sec Where A = cross-sectional area of the pipe in ft2 V = velocity of flow in feet per second Bhp = actual power delivered to pump shaft by driver Whp = pump output or hydraulic horsepower Dr. C. L. Jones Biosystems and Ag. Engineering

Pump Efficiency Ratio of whp to bhp: Dr. C. L. Jones Biosystems and Ag. Engineering

System Example: 80 ft of 4” ID galv System Example: 80 ft of 4” ID galv. iron pipe with 3 elbows, 75’ lift, pumps from an open tank, discharges through a pipe to a tank at atm. Pressure (find rate, imp. dia., eff., motor size, rpm) Ratio of whp to bhp: Dr. C. L. Jones Biosystems and Ag. Engineering

Questions??? Dr. C. L. Jones Biosystems and Ag. Engineering