Colorimeters OR photometers

Slides:



Advertisements
Similar presentations
Spectrophotometry Basics Adapted from Basic Laboratory Methods for Biotechnology by Lisa Seidman and Cynthia Moore.
Advertisements

SPECTROSCOPY.
What is Spectroscopy? The study of molecular structure and dynamics through the absorption, emission and scattering of light.
Introduction to Spectrophotometry
Principles of instrumentation.
Introduction to Spectrophotometry
Colors  UV – VIS spectroscopy Jakub Kovář  Jiří Stančík.
Ultraviolet – Visible Spectrophotometer. What is UV – Vis spectroscopy? Ultraviolet – visible spectroscopy is a measure of the absorbance of radiation.
Introduction to Instrumental Analysis - Spectrophotometry
Dr. Maha Al-Sedik. Objectives:  Electromagnetic Radiation  White light  Beer’ s law  Spectrophotometer  Components of spectrophotometer  Types.
COLORIMETRYCOLORIMETRY Prepared By Michigan Department of Environmental Quality Operator Training and Certification Unit Note: A printed description of.
Spectrophotometry and Plotting of Calibration Curve
5 Components Common to All Optical Spectrometers Source Transparent Sample Holder Wavelength Selector Radiation Detector Signal Processor and Readout.
Principles of instrumentation Prepared by: Ibtisam H. AlAswad Reham S. Hammad.
ANALYTICAL CHEMISTRY CHEM 3811 CHAPTER 18 DR. AUGUSTINE OFORI AGYEMAN Assistant professor of chemistry Department of natural sciences Clayton state university.
Colorimetry & Spectrophotometry.
SPECTROPHOTOMETRY. Determines concentration of a substance in solution by Measures light absorbed by solution at a specific wavelength by using spectrophotometer.
Spectrophotometer Prof.Dr. Moustafa M. Mohamed Vice Dean Faculty of Allied Medical Science Pharos University in Alexandria, EGYPT.
spectrophotoMETER Dr. Beenish Zaki, Instructor
ANALYTICAL CHEMISTRY CHEM 3811 CHAPTER 19 DR. AUGUSTINE OFORI AGYEMAN Assistant professor of chemistry Department of natural sciences Clayton state university.
Spectrophotometry.
Introduction to Spectrophotometry
Spectrofuorometer lab. 1. Fluorescence spectroscopy or (spectrofluorometry) Is a type of electromagnetic spectroscopy which analyzes fluorescence from.
Introduction to Spectrochemical Methods
Colorimeters or photometers
Dr. Beenish Zaki, Department of Biochemistry.  When the white light passes through a coloured substance, a portion of it is absorbed by the colouring.
Centrifuges.
Spectrophotometer.
SPECTROPHOTOMETRY. Spectrophotometry Determines concentration of a substance in solution –Measures light absorbed by solution at a specific wavelength.
CLS 332 CLINICAL INSTRUMENTAL ANALYSIS. A VISIBLE ABSORPTION SPECTROMETER.
Summary: (Last lecture) Absorption spectroscopy definition electromagnetic spectroscopy matter absorption spectroscopy fundamental terms (transmittance,
Photometry.
Lab (9): Measurement of colors Spectrophotometry Analytical biochemistry lab KAU-Biochemistry dep. Nouf Alshareef
Spectrophotometry at a Glance
COLORIMETRY & SPECTROPHOTOMETR
Cairo University Faculty Of Engineering chemical engineering department SPECTROPHOTOMETER.
hn1 hn2 optical l selector source sample detector signal processor
Principles of spectroscopy. Basics of atom Atom : Atom consists of electrons, protons and neutrons. Molecule : Atoms when assembled in an orderly manner.
Lab1 A VISIBLE ABSORPTION SPECTROMETER. -One of the simplest and most widely used methods to determine concentration of a substance in solution -Measures.
1 Instrumental Analysis Tutorial 2. 2 Objectives By the end of this session the student should be able to: 1.Describe the grating principle of work. 2.Describe.
Theory of Spectrophotometry
Principles of instrumentation. Photometry - Photometry means “the measurement of light” If a substance can be converted to a soluble, colored material,
Chem. 133 – 3/16 Lecture.
Introduction to Spectrophotometry
Lab1 A VISIBLE ABSORPTION SPECTROMETER
Laboratory equipment Lecture (4).
Beer-Lambert law Gihan Gawish.Dr.
Principles and practice of Spectrophotometer
Spectrophotometer - Visible Type Spectro - photometer consists of two instruments : Spectrometer   Photometer  Spectrometer   for producing light.
Introduction to Spectrophotometry
Estimation of analyte concentration on the basis of light absorption
Colorimeters or photometers
Introduction to Spectrophotometry
Principles of Spectrophotometer
Spectrophotometer Dr . S. Jayakumar.
RINCIPLE OF COLORIMETER AND SPECTOPHOTOMETER AND VARIOUS TYPE OF ANALYSER USED IN CLINICAL BIOCHEMISTRY.
Measurements involving light –A Basic Principles and Instrumentation
Satish Pradhan Dnyanasadhana College, Thane. Department of Chemistry S
Dnyanasadhana College, Thane. Department of Chemistry T. Y. B. Sc
INTRODUCTION TO SPECTROPHOTOMETRY
Measurement of Analytes
INTRODUCTION TO SPECTROSCOPIC METHODS OF ANALYSIS
Instrumental Analysis
WELCOME S.Y.B.Sc. (Analytical Chemistry)
SPECTROPHOTOMETRY Applied Chemistry.
Spectrophotometer.
Spectrophotometry A method to determine concentration of a species exploiting the absorption of EMR.
WELCOME S.Y.B.Sc. (Analytical Chemistry)
Clinical instrumental analysis
Spectrophotometric Analysis
Presentation transcript:

Colorimeters OR photometers Introduction To Medical Technology - Lab 14 - Colorimeters OR photometers

Introduction Characteristics Of Light Photometry means “The Measurement Of Light” Photometer & spectrophotometer are instruments used for this type of measurement, in which a photocell or photomultiplier tube is used to detect the amount of light that passes through a colored solution from a light source. Characteristics Of Light Light is a form of electromagnetic energy that travels in waves. The wavelength of light is the distance between two beaks of the light wave, is inversely proportional with its energy. In the visible region, the color of light is a function of its wave length, increasing from violet towards the red color. Objects that appear colored absorb light at particular wavelength and reflect the other parts of the visible spectrum resulting in many shades of color.

principle If a substance can be converted to a soluble, colored material, its concentration may be determined by the amount of color present in the solution. The greatest sensitivity is obtained when the light permitted to pass through the solution is of a particular wavelength.(The wavelength shows the maximum absorbance for the solution color).

Wavelengths Of Various Types Of Radiation Approximately wavelength Types of radiation < 0.1 Gamma 0.1 -10 X-rays < 380 Ultraviolet 380 - 750 Visible >750 Infrared > 25 x 107 Radio-waves Energy Wavelength

The visible Spectrum Green–Yellow Violet 400-435 Yellow Blue 435-500 Color Of Reflected Light Color Of Absorbed Light Approximately Wavelength Green–Yellow Violet 400-435 Yellow Blue 435-500 Red Green 500-570 570-600 Green blue Orange 600-630 630-700

Example a substance that absorbs violet light at 400 nm reflects all other light and appears as yellow green. To measure the concentration of a blue solution, light is passed through it at about 590 nm. The amount of yellow light absorbed varies directly in proportion to the concentration of the blue substances in the solution.

Beer’s law Io It %T = It Io x 100% When the light of an appropriate wavelength strikes a cuvette that contains a colored sample, some of the light is absorbed and the rest is transmitted through the sample to the detector. % percent transmittance which represents the proportion of light reaches the detector. %T = It Io x 100% Where: Io: is the intensity of light striking the sample. It: is the intensity of transmitted light. Io It

Beer’s law If the concentration of a solution is increased, the It will decrease and then % T is decreased. The relationship between the concentration and %T is not linear, but if the logarithm of the %T is plotted against the concentration, a straight line is obtained The term absorbance is used to represent (- log % T). A = - log % T = 1 log % T

A = a b c Beer-Lambert Law Which states that “the absorbance of a solution is directly proportional with the concentration of the dissolved substance” Where: A is the absorbance a is the molar absorptivity coefficient. b is the light bath through a solution. For x substance: Abs(x) = a b Conc.(x) (1) For standard substance: Abs(st) = a b Conc.(st) (2)

From 1, 2 𝑨𝒃𝒔.(𝒙 𝑨𝒃𝒔. (𝒔𝒕 = 𝒄𝒐𝒏𝒄. (𝒙 𝒄𝒐𝒏𝒄. (𝒔𝒕 𝑪𝒐𝒏𝒄. 𝑿 = 𝑨𝒃𝒔.(𝑿) 𝑨𝒃𝒔.(𝑺𝒕) 𝒙 𝑪𝒐𝒏𝒄.(𝑺𝒕) Then we can determine the concentration of x substance by measuring both sample and standard absorbance, which can be made by spectrophotometers.

Requirements for the Beer’s - Lambert’s law to hold true Solution Requirements The solution must be the same through out the test time, and the molecules of which it is composed must not associate or dissociate at the time absorbance is being measured. Instrument Requirement The instrument used in colorimetric tests must show satisfactory accuracy, sensitivity and reproducibility at the different wavelengths used. The cuvettes used in the instrument must be optically matched, free from scratches clean.

UV – Visible Photometry Typical coloremetric instruments contain five components: Stable source of radiation energy. A device that isolates a restricted region of the spectrum for measurement. A transparent container for holding the sample. A radiation detector which converts radiant energy to electrical signals. A signal processor and read out which displays the transudated signals, a meter scale, a digital meter or a recorder chart.

UV – Visible Photometry

Radiation Sources In UV region: The most commonly used is deuterium lamp or hydrogen lamp. That produced light with (160-375) nm. In visible region: Tungeston filament lamp is the most commonly used and produces light at (350-2500) nm.

Wavelength Selectors Filters may be formed of a transparent dielectric layer such as calcium fluoride, the thickness of this layer is controlled carefully and determines the wave length of transmitted light. Or formed of colored glass that absorbs certain portions of spectrum and transmits others, according to its color. Monochromators Which may be: Grating monochromator: A monochromator is a device used in optics to select a range of the narrowest possible wavelengths from a polychromatic luminous beam. Grooves formed of relatively broad faces and narrow unused face.

Prism Principle Suppose a radiation of 2 wave length enter from the entrance slit, they strike the mirror to be reflected on the dispersing element to produce angular dispersion of light which face a black surface and come out from the exit slit only, by moving monochromator, a specific wave length will pass from the exit slit. For prism by moving it only one  will exit.

Used Monochromators as Colorimeters Spectrophotometer Used Monochromators as Wavelength selector Photometers Used Filters as wavelength selector

silicon diode electrode Photoconductivity detector Sample containers Cuvettes that hold the samples must be made of material that passes radiation in the spectral region of interest. Quartz or fused silica may be used in the spectral region (350-3000 nm), mean it may be used in the UV, visible and a part of infrared. Radiation detectors and read out Photomultiplier Tube Phototubes silicon diode electrode Photoconductivity detector One of them may be used to transform radian energy into electrical energy. Which may be measured by galvanometer or any or any read out device.

Principle of phototube Photo-emissive cathode that tends to emit electrons when irradiated. These electrons flow to the anode generating current.

Flame Photometry Or Flame Emission Spectroscopy Flame photometry is a spectral method in which excitation is caused by spraying a solution of the sample in a hot flame. A characteristic radiation is emitted in a flame by individual elements and the emission intensity is proportional to the concentration of the element introduced into the flame. Flame photometry is used for the determination of electrolytes in a given solution. It is most commonly used for the quantitative analysis of sodium and potassium ions in body fluids.