Chapter 3 - Lesson 3 Sculpture

Unique Quality of Sculpture Exists in space Viewed from all sides Actual space rather than illusion of space A sculptor sets out to fill space with original, visually appealing forms. These forms may echo reality, express powerful emotions, or communicate ideas.

Vocabulary of sculpture Bas relief High relief Sculpture in the round Modeling Carving Casting Assembly Kinetic art

Relief Sculpture Not all sculpture can be viewed from all sides. Relief sculptures are 3-d forms mounted to a flat surface. Like paintings these sculptures are designed to be viewed form the front. Bas relief – the sculptured forms project only slightly from the background High relief – the sculptured forms extend boldly out into space

Bas Relief- Donatello - Feast of Herod

High Relief – Andrea della Robbia – Madonna & child

Sculpture in the round Any freestanding work surrounded on all sides by space. Not all freestanding sculptures are meant to be viewed from all sides.

Processes of Sculpture Modeling – is a process in which a soft, pliable material is built up and shaped into a sculptural form. Clay Wax or Plaster Sculptor will gradually add more and more material to build a 3-D form, this is known as the additive process

Processes of Sculpture Carving – is cutting or chipping a form from a given mass of material to create a sculpture. Stone Wood Removing material in order to create a sculpture is known as the subtractive process. Each type of stone has unique characteristics which create individual challenges and textures.

I saw the angel in the marble and carved until I set him free. Michelangelo To insert this slide into your presentation Save this template as a presentation (.ppt file) on your computer. Open the presentation that will contain the quote slide. On the Slides tab, place your insertion point after the slide that will precede the quote slide. (Make sure you don't select a slide. Your insertion point should be between the slides.) On the Insert menu, click Slides from Files. In the Slide Finder dialog box, click the Find Presentation tab. Click Browse, locate and select the presentation that contains the quote slide, and then click Open. In the Slides from Files dialog box, select the quote slide. Select the Keep source formatting check box. If you do not select this check box, the copied slide will inherit the design of the slide that precedes it in the presentation. Click Insert. Click Close.

Processes of Sculpture Casting – a melted-down metal or other liquid substance is poured into a mold to harden. This method allows the artist to duplicate an original sculpture done in wax, clay, plaster or some other material. Most widely used for is known as the “cire-perdu” or lost wax. Well over a thousand years old method.

Processes of Sculpture Assembly – The artist gathers and joins together a variety of materials to construct a 3-D work of art. Assemblage is a modern technique usually utilizing found items. Kinetic Art – is a sculptural form that actually moves in space. (both externally and internally.)

Sculpture No one can predict what the sculptures of the future will look like. In one important way, however, they will be like the ones of past and present: They will continue to record the full range of human experience in ways that are sometimes shocking, sometimes touching, but always thrilling to see, to touch, and to appreciate.