RESCUE BOAT DAVIT CME Models: D39-11.5-11-24 & D50-14.75-11-24

Davit Specifications Model D39-11.5-11-24 Model D50-14.75-11-24 SOLAS/ABS/USCG Certification & Approval SWL 3,100 LBS (1409KG) Electric Hoist – 2,800 lbs. at 60 FPM Electric Hoist Motor – 8.25 HP Electric Slew Motor – 5.4 HP Gravity Lower 180 FPM (55m/min) Electric Slew Speed – 0.8-1.7 RPM Launch and Recovery Vertical Distance – 50 ft. Slewing – 360° Electric and Manual Emergency Slew – by hand Emergency Hoist – by hand Operational Condition – 20° List – 10° Trim

Main Electric Hoist Electric Hoist Motor with Failsafe Caliper Brake – for controlled drag braking Removeable Emergency Handwheel – for manual operation Sprag Clutch – allows for controlled freefall Stainless Steel Brake Disc Limit Switch – stops power to hoist motor

Boom Details Mounted to boom Wired to starter box Switch inside cover Boom mounted flood light Mounted to boom Wired to starter box Switch inside cover

All pins are made of 17-4 stainless steel Sheave is made of machined stainless steel Boom consists of heavy duty welded steel construction with anti-2-block, to limit the height of the hook Permanently lubricated bushing – means no more trouble with sheaves not turning

Eagle USCG Approved Release Hook Hook operation is off-load only Hook certification provided upon delivery Rescue Boat Davit Release Hook

Self-contained, no hydraulic fluid Clean, efficient Low Maintenance Removable cover for manual slew operation The slewing drive train consists of a planetary reducer through an electric brake motor enclosed in the davit column. Added benefits: Self-contained, no hydraulic fluid Clean, efficient Low Maintenance Electric Slew Motor – 110V Space Heater Planetary Reducer

Permanently lubricated slew bushings are mounted inside the column, riding on stainless steel wear plates. Standard 24” tall mounting pedestal

Why CME Rescue Boat Davits? Manufactured in the USA Domestic Service and Support No more long lead time for replacement parts. Coastal Marine Equipment is stocking all key components to eliminate future down times due to the rescue boat davit. Maintenance friendly design No more accumulator to corrode or leak and no hydraulic leaks. Our davit is 100% electric. Electric slew motor is mounted inside the column, the electric hoist is IP56 rated mounted to the underside of the boom. No more slewing gear/gear teeth to corrode or replace. Our new davit incorporates permanently lubricated slew bushings mounted inside the column riding on stainless steel wear plates. Anti rotation, galvanized wire rope with hook pre-rigged to the davit. Electric motors and control panel include anti-condensation heaters. Stainless steel fasteners ½” and smaller Teflon® coated fasteners larger than ½” Corrosion Protection – All steel parts are blasted and painted using Coastal Marine’s three-part marine duty paint system (zinc-based primer, epoxy intermediate coat, and epoxy topcoat.