LEYARD DIRECTLIGHT LED VIDEO WALL SYSTEM Product Overview October 2017

DirectLight Naming Terminology Generation 1 (Launched March 2015) Generation 2 (Launched November 2016) Generation 1 Product Terminology Public name Planar® DirectLight® LED Video Wall System Power DirectLight® Power Supply Module Software DirectLight® Control Software Mounting Planar® EasyAlign™ Mounting System Generation 2 Product Terminology Public name Leyard® DirectLight® LED Video Wall System Power DirectLight® Remote Power Supply (RPS) Software Leyard® LED Control Software Mounting Leyard® EasyAlign™ Mounting System

Leyard DirectLight LED Video Wall System Premier Ultra-Slim, Fine Pitch Solution Unique fine pitch video wall system available in range of pitches Wall-mounted, full front access video wall that takes less room Ultra-slim 27” diagonal display Pitches: 0.9, 1.2, 1.5 and 1.8mm Hits Full HD, 4K, 8K exactly Incorporates mount and alignment features that reduce time to deployment and produce perfectly aligned walls Built for image quality, reliability, redundancy, hot-swap and long life Low power consumption and circuit consumption by design

Complete LED Video Wall System Adjustable Wall Mount Front Access Display Module Alignment features < 4” depth mounted Off-board, Redundant Power with Hot-swap and 220V support Leyard LED Control software for management

Leyard DirectLight vs Planar DirectLight Supports finer pitches – 0.9 and 1.2mm Faster, easier, more precise installation, alignment and service access 18 mechanical innovations make significant improvements Less power and improved remote power supply Lower power consumption Standby mode for dramatically lower power when wall is not in use 3-4 times more power from same rack space Hot swap power supplies Optional 220V version for greater density and fewer circuits Circuit level redundancy 16:9 aspect ratio allows all pitches to hit Full HD, 4K, 8K exactly Larger (68% more area), easy to handle display requires fewer units per wall Supports 90° outside corners with only 15mm gap Supports front tilted walls and more tightly concave walls with front service

Leyard DirectLight 16:9 Aspect Ratio Walls

Leyard EasyAlign Mounting System Next-Generation in Front Access Installation and Service New 3-part construction and numerous mechanical improvements make it: Easier to install Easier to eject Smoother to align More securely in place

Superior Front Access with Leyard DirectLight Front Access Feature Leyard DirectLight (Gen. 2) Other Guys Wall-mounted Yes ?? Includes the wall mount Front installable Front replace modules Front replace cables Front replace power and electronics 2 levels of Z axis plus X and Y axis adjustment Positive locking for forward tilt walls Supports concave walls while maintaining front service Supports 90° corner with wall mount and front access Hot swap power supplies (via remote power supply)

Rear View: Installed Centrally located I/O, mount designed back from the edge and angled display edge together enable 90°corner wrap

Built-in Feature: 90° Corner Support Support for 90° exterior corners built in Leyard EasyAlign Mounting System designed to accommodate required spacing Front service features still operate properly 15mm corner seam can be trimmed to black

Built-in Feature: 90° Corner Support Mounting, alignment and service access features all continue to work unobstructed

The Result is Highly Integrated Installations

Why Remote Power? Removes from the video wall: Depth Weight Heat Points of service No outlets required at the video wall And adds at the rack: Reliability Redundancy – Power module and circuit level Hot swap module replacement Diagnostics

Introducing DirectLight Remote Power Supply (RPS) Power Improvements Leyard DirectLight Series (Gen. 2) itself is a low power design New RPS is 3 to 4 times higher power density – fewer RUs Redundant and now hot swappable 220V support to further reduce circuits used Ultra-low Standby power mode (< 3 Watts) Leyard® Variable Power Restriction™ (VPR™) feature: User-controlled power capping mechanism allows the wall to be safely commissioned using fewer circuits

Correct RPS Included with Leyard DirectLight Two form factors (depending on the installation) RPS110 100-240V | Maximum 3,600 Watts output | 1 RU RPS220 200-240V | Maximum 7,200 Watts output | 1.5 RU - Greater power density

Leyard LED Control Software Video Wall Image Control Windows®-based app for set- up and image control Brightness control RGB adjustment Gamma gray scale adjustment Switch between HDMI input and test patterns Electronic seam correction – per edge control

Leyard DirectLight Key Selling Points Full range of fine pitch LED displays 0.9, 1.2, 1.5, 1.8mm pixel pitches Wall mounted – requires no mounting frame Includes it’s own mount with Leyard EasyAlign features Installs <4” to the wall – ADA compliant Off-board power to reduce heat and points of failure from video wall No power outlets needed at the video wall Redundant and hot-swappable power supplies with circuit redundancy Power-efficient LED design and 220V support to reduce circuit requirements 90° corner wrap support, front tilted video walls and more tightly concave walls with front service Get the Leyard DirectLight (Gen. 2) architecture while competitors are trying to copy Planar DirectLight (Gen. 1) Leyard MicroGrid Shader at 1.5mm produces deep black Optimized for Full HD, 4K and 8K From the worldwide market leader in fine-pitch LED

Introducing Leyard® LED MultiTouch Industry’s First Standard, Completely Seamless Interactive Fine-Pitch LED Video Wall High performance touch 32 simultaneous touch points Excellent tactile feel Anti-static Visually superior Uniform color and brightness Anti-glare surface No parallax error Easy to deploy and maintain Lightweight, thin and unobtrusive No additional structure or special reinforcement needed Simplifies service Features Leyard® PLTS™ (Pliable LED Touch Surface™) Technology, a specially formulated, lightweight and durable touch material Available in 108”, 151” and 196” diagonal LED video walls

Leyard LED MultiTouch Available Models Sleek multi-touch frame 108” 151” 196” 59.5” (1510.5mm) 100.8” (2560.5mm) 148” (3760.5mm) 195” (4960.5mm) P1.2 1920x1080 P0.9 2560x1440 P1.2 2880x1080 P0.9 3840x1440 P1.2 3840x1080 P0.9 5120x1440 Sleek multi-touch frame 32-point IR touch technology 3.16” (80.25mm) wide x 4.6” (117.4mm) depth installed Leyard PLTS (Pliable LED Touch Surface) Unique and proprietary touch surface with numerous customer advantages Installed in the field and serviceable Integrated with Leyard DirectLight DL2-1.2 and Leyard DirectLight DL2-0.9 in three configurations

THANK YOU