2. The F3+ has been updated over the original F3 with a whole range of new features, and is more powerful than ever before – the world’s most powerful single chip DLP™ projector!

3. SXGA+ (1400 x 1050) resolution Up to 6500 ANSI lumens Up to 7500 : 1 contrast ratio Built-in RealColor™ colour management suite Range of six projection lenses; 0.8 – 7.0 : 1 key features

4. target markets rental / staging –high brightness and multiple configuration options –configurable colour wheel options –easily changeable lenses – bayonet mount visualisation / simulation –multiple lens options –high brightness and perfect colour uniformity –DLP™ colour reproduction control rooms –rear projection lenses –configurable brightness –long lamp life, up to 8000 hours –24/7 reliability –single chip DLP™ technology for long life medical imaging –highly precise grey scale –high resolution –high contrast and deep black levels

5. target markets projectiondesign entertains a number of applications, from simulation and visualisation, through home theater, public displays and office use. Common for all is high resolution and needs for long lasting displays, often run in 24/7 environments.

6. The F3+ targets markets in need of very high performance graphical reprodcution SXGA+ resolution provides 87% resolution increase over XGA, and is 4:3 aspect ratio XGA SXGA+ target markets

7. completely configurable performance IRIS fully adjustable from F/2.1 to 6.9 for all lenses – anbling Enables any brightness level from full specification – 6500 ANSI lumens, down to about 1000 ANSI lumens at full power Contrast increases correspondingly, from about 1700 : 1 to full specification 7500 : 1 at smaller IRIS setting Enables unprecedented flexibility in application adaptation

8. long life DuArch™ architecture dual high performance lamps allow long life continuous operation, with no down time Hot Swap lamps allow lamp change while in operation – without shutting down the projector UHP™ lamps yield higher performance over time than other, competitive lamps from other manufacturers configurable lamp output gives wide range of possible brightness confirgurations and lamp life combinations, suitable for a wide range of applications

9. patented DuArch™ dual architecture optical system complete dual optical architecture – independently driven –lamps – 2x300W UHP –colour wheels – multiple different configurations: high brightness, graphical presentation and viz/sim options –light control apertures – illumination and projection lens fail-safe and high reliability –if one lamp fails, the other continues or starts up –HOT SWAP system – change one while the other is running

10. RealColor™ colour management projector colour management by projectiondesign Enables easy on-site matching of projectors using built-in software A simple and accurate colour management suite that enables accurate white point and grey scale calibration Each projector is uniquely characterized and calibrated during the manufacturing process. Provides easy access to x,y colour coordinates and accurate black body curve colour temperature tracking

11. remote asset management and control full remote management –built-in TCP/IP interface with access to all functionality and status information – without the need for special tools or software –the industry’s most complete control and status management over linked RS232 – up to 128 devices on a single UART –large, back-lit status information display on unit for direct view management –”direct view” lamp status monitoring via side-view –RCID and direct cable link from remote control for multi-projector environments

12. DLP™ reliability designed for 24/7 continous use –process control rooms –surveillance control rooms –public displays extremely long life time expectancy –> 100,000 hrs for the core display technology medical imaging –Uniform grayscale, no colour shifts –Deep blacks –No bright pixel defects –Colour matched system possibilities –No convergence errors

13. integrated design philosophy integrated design philosophy realises better and noise free video, through using a single board for all video signal processing lifelike colours and seamless images from using DLP™ technology Faroudja DCDi™ (FLI2310) video processing and scan conversion for the best possible video image, including film mode detection and processing, and increased noise reduction philips uhp™ lamps provide the most stable and reliable light output the DVI digital interface provides lossless transfer of video image data –includes HDCP RealColor™ colour management suite allows perfect colour reproduction and matching capabilities

14. unique performance features the F3+ features computer modelled 3D gamma correction for optimal colour reproduction, key performance for working with graphically intensive and challenging applications a fully sealed optical architecture prevents dust and particles from entering the delicate optics – needed for operation in harsh environments

15. lens shift with very large adjustment range enables total freedom in placement of projector during installation ±110% vertically, ±90% horizontally lens shift easily enables stacking of two or more projectors

16. multiple lens options 0.8 : 1 super wide angle for on-axis rear projection 1.2 : 1 wide angle - fully shiftable 1.3 – 1.7 : 1 wide angle zoom 1.7 – 2.5 : 1 standard zoom 2.5 – 4.0 : 1 short tele zoom 4.0 – 7.0 : 1 long tele zoom All lenses similar in size and weight to enable easy installation and physical dimensioning All lenses use single-key release bayonet mounts

17. advanced connectivity wide range of inputs, digital and analogue, with backlight for connections in the dark XPort™ expandable interface for front- and back-end signal processing –alternative input sections (front end) –blending, warping and shading functions (back end)

18. available colours silver metallic black metallic