HP Envy 4525 Printer Setup Best HP Printer Support Call: Visit: http: // hp.help /

The printer setup instruction has information to setup the HP Envy 4525 printer on the go. Check this and know how to install hardware, fix the ink cartridge, set the preference, and install the printer driver. Check our website for more details. HP Envy 4525 Printer

As soon as you receive the printer at your place, open the package, and cross check if all the accessories mentioned in the manual are received. Steps are given below for HP Envy 4525 printer setup: Open the package, take out the HP Envy 4525 printer from it, and remove all the plastic tapes and bubble wrapper present around it.

� Make sure that the plastic tapes present on the outside of the printer are removed. Close the output tray, and hold the ink cartridge access door. Check and remove all plastic tapes and materials present inside the printer. Subsequently, close the ink cartridge access door. Use a power cord to connect the printer to the power supply. Once the printer is switched on, go to the control panel to set preferences.

� By doing this, the carriage moves to the center of the HP Envy 4525 printer setup. Do not proceed until it becomes idle. After you remove any one of the ink cartridges from the package, place it in slot. � To place it, hold the ink cartridges on its sides with the nozzle faces the printer and then fix it. � The same procedure is for all the ink cartridges irrespective of colors. Pay attention while installing and make sure that the correct color is placed in the provided slot.

Place plain, U.S letter or A4 paper. Check the paper type and size before you load the input tray of the printer. Place paper of similar types with the short edge forward and the print side stay closet to you. Drag the tray until it rests in a place and then slide the paper width guide to the right corner until it settles at the edge of the paper. � Align the ink cartridge in order to get best results out of your printer. After you place the paper in the loading tray, the HP Envy 4525 printer starts printing the alignment page.

Open the scanner lid and keep the alignment page with the print side down on the scanner glass, and then place it liable to the engraved guides around the glass. � After closing the lid choose either the Start Copy Black or Start Copy Color option from the control panel. l After the alignment gets completed, look for the driver and install it on the computer. The procedure to download and install the driver for Mac and Windows computer remains the same except the file format.

Use the prompts to accomplish the downloading procedure. Once the driver and software is completed, take a print of a test page to affirm that everything is all set. If you find any difficulties while setting up the printer, give us a ring on the toll- free number. Get the Best and Quick support for HP Envy 4525 Printer setup at 123.hp.com