Assembly Modeling Constraints

Slides:



Advertisements
Similar presentations
S2 INVENTOR GAME BOY part one MAIN BODY. S2 INVENTOR Here is what the finished result might look like once put together...
Advertisements

Feature-Based Modeling and Optional Advanced Modeling
Solidworks: Lesson 4 – Assembly Basics and Toolbox
Inventor Or How to build things.
© Project Lead The Way, Inc.
Constraint Based Modeling Geometric and Dimensional
SolidWorks This is a Powerful and User-friendly software to design 3D model of Mechanical parts and Assemblys,Drawings to manufacture and also FEM analysis,
Solidworks Exercise Modeling the bearing block (40 minutes)
Engineering 1182 College of Engineering Engineering Education Innovation Center Assembly Modeling Constraints Rev: AJPAssembly Modeling Constraints1.
Exploded View Extracting Drawings
• Open a new part file • Create Cylinder
Introduction to Assemblies Chapter 6. Assemblies Assembly files consist of multiple parts and the mates that define constraints between parts By default,
Ken YoussefiMechanical Engineering Dept., SJSU 1 Introduction to Fundamentals of Assembly.
SolidWorks: Extruded Cuts, Fillets, and Patterns Introduction to Robotics.
SOLIDWORKS: Lesson III – Patterns & Mirrors
SOLIDWORKS: Lesson 1 - Basics and Modeling Fundamentals
Solidworks Lesson 5 - Assembly Configurations and Motion
Basic Assembly Constraints and Concepts
SolidWorks Teacher Guide Lesson2
Tutorial (Basics in SolidWorks) 小明 in ERB106.  Modeling  2D ▪ Sketching ▪ Dimensioning ▪ Mirror/Pattern ▪ Trim/Extend ▪ Fillet/Chamfer  3D ▪ Extruded/
SOLIDWORKS: Lesson II – Revolutions, Fillets, & Chamfers UCF Engineering.
Engineering 1182 College of Engineering Engineering Education Innovation Center Extracting Drawings Rev: , AJPExtracting Drawings1.
This is what we want to draw Extrude Mirror Round Edges.
Assembly Modeling Constraints ENGR 1182 SolidWorks 05.
Solidworks Exercise Modeling the piston (30 minutes) Open a new part file and Save as Piston.sldprt Create the Cylinder Click on Top Plane (or plane 2)
Image courtesy of National Optical Astronomy Observatory, operated by the Association of Universities for Research in Astronomy, under cooperative agreement.
Extrusion Revolve ENGR 1182 SolidWorks 02.
Assembly Modeling © Project Lead The Way, Inc.. The following presentation will guide you through the construction and assembly of a toy train engine.
Assembly Practice Step by step instructions. Basics of Constraint Dialog Box Preview Solutions Surface or Edge Selectors Offset Mate Angle Tangent Insert.
Engineering 1182 College of Engineering Engineering Education Innovation Center Assembly Modeling Constraints Rev: AJPAssembly Modeling Constraints1.
This is what we want to create Add component and fix in place Add component and make it spin (Get propeller from the CD or use skills from previous tutorials.
Basic Assembly © 2012 Project Lead The Way, Inc.Introduction to Engineering Design.
Engineering 1182 College of Engineering Engineering Education Innovation Center Constraint Based Modeling Geometric Constraints Rev: , AJPGeometric.
Train Body The next series of slides will guide you through the construction of the train body. Start a new drawing and save it as Train Body.
Engineering 1182 College of Engineering Engineering Education Innovation Center SolidWorks Layout Model Tree Viewing Options Rev: , AJPSolidWorks.
Solid Modeling SolidWorks Layout ENGR 1182 SolidWorks 01.
Solid Modeling SolidWorks Layout 2D Sketching ENGR 1182 SolidWorks 01.
Model Tree Viewing Options
Solid Modeling SolidWorks Layout
Lecture 14 SolidWorks Basic Functionality
Extracting Drawings - DEMO
Exploded View Extracting Drawings
Forging new generations of engineers
Basic Assembly.
Forging new generations of engineers
Design Intent ENGR 1182 SolidWorks 4.
Exploded View Extracting Drawings
Constraint Based Modeling Geometric and Dimensional
Extracting Drawings - DEMO
Introduction to SolidWorks
Basic Assembly Constraints
Forging new generations of engineers
Assembly Modeling Constraints
Basic Assembly.
Fusion 360 Pac Man Tutorial
CAD Parts
Solid Modeling SolidWorks Layout
Basic Assembly Introduction to Engineering Design
In this chapter, you will learn the following:
Basic Assembly.
In this chapter, you will learn the following:
Basic Assembly.
In this chapter, you will learn the following:
Extracting Drawings - DEMO
Constraint Based Modeling Geometric and Dimensional
Basic Assembly Constraints
Instructor’s Guide to Teaching SolidWorks Software Lesson 4
Basic Assembly Constraints
Presentation transcript:

Assembly Modeling Constraints ENGR 1182 SolidWorks 05

Today’s Objectives Creating assemblies by constraining 3D parts together Movement and Location dictated by Constraints SW05 Activity SW05 Application

Assemblies Assemblies are collections of 3D parts that form one engineering system Modeled to Fit Together Location defined by 6 degrees of freedom 3 translational (x,y,z) 3 rotational (about x,y,z axes) Assembly Constraints in SolidWorks are applied using the Mates tool which positions two components relative to one another. Assemblies are collections of 3D parts that form one engineering system The parts are modeled separately to the correct dimensional constraints so that they assemble correctly The location of the part is defined by 6 quantities 3 translational (x,y,z) 3 rotational (about x,y,z axes) Mating Features are used to assemble the model Vertices Faces Axes

Modeled to Work Together Compatible Components Dimensional Tolerances Assembly Constraints Operational Requirements Moving? Fixed? When parts are originally constructed they must be made according to dimensions The system is then assembled by adding relations between the compatible components These relationships are determined by the operational requirements of the system

Defining Location 6 degrees of freedom constrain an instance of a part file X,Y,Z Translation X,Y,Z Rotation

Assembly Constraints (position two components relative to one another) Coincident Parallel Perpendicular Tangent Concentric Lock Distance Angle The bridge example will be used to demonstrate these core concepts

Concentric Constraints Axes of cylindrical features and holes can be selected Concentric constraints align centerline axes

Mating Surfaces 2D surfaces can be mated using the Coincident Constraint to become flush with one another but the correct direction must be given to the computer

Additional Constraints Distance between entities if not flush Coincident Lines or Vertices

SolidWorks Adding Components Select from the open parts listed or use the Browse to find saved files In the Assembly tab (similar to the Features tab of a Part file) use the Insert Components button to add part files to this assembly

SolidWorks: First Component INSERTING ADDITIONAL PARTS ANCHORING THE BASE AT THE ORIGIN After placing the base part, reopen the Insert Component dialog box and click on the pin to keep the box open. Now browse and double click on or Open the second part and left SINGLE click in SolidWorks window to place second part. Next go to the Insert Component dialog box and single left click on the second part just inserted so that it’s blue high-lighting is removed. Now click on browse and select the third part, left SINGLE click to place it, left click on the third part in the Insert Component dialog box to remove the blue high-lighting and repeat sequence. After placing the last part, select the green check mark or hit ESC to complete the insertion of parts. Note that if multiple copies of any part are needed, one can SINGLE click again after the part has been placed to produce another copy of the part. The first part inserted will become fixed in space and should be placed at the origin as a base for the assembly. This must be done by selecting the part and then clicking the green check mark to default to the origin instead of just left clicking in space.

SolidWorks Constraints/Mates In the figure window it will show a preview of the mating and a smaller dialog box will appear In SolidWorks these are the Standard Constraints used in Assemblies Change Direction Confirm Mate

The Secret to Successful Assemblies Move components to be constrained close to each other Rotate one component so the constrained surfaces or edges can be easily viewed Zoom in so that the surface or edges are easy to select

Verifying that Assemblies are Fully Defined Before saving your assembly as a PDF using PrtScrn and File/Save As, check that the Fully Defined message appears at the bottom of the display. Apply the Lock constraint to all rotating parts Apply the FIX constraint to any Titles (textboxes) If an assembly is not Fully Defined, using your mouse, “tug” on various parts. Eventually you will find a part that you can move. From the movement you should be able to determine which Mating constraint(s) needs to be applied to achieve the Fully Defined condition.

In the future, all SolidWorks Assemblies homework and exam problems requiring Fully Defined will require the following: Note that using the LOCK and FIX constraints described above are required in order that the FULLY DEFINED indication described on the next slide will appear if all the proper part constraints have been applied by the student. This process allows both the student and the grader to easily determine if the proper part constraints have been applied.

Examples of Fully Defined Part File - *.SLDPRT The only Sketch with a minus sign in front of it is the Text Block, so object is FULLY DEFINED Note that for a Part File, once you leave the Sketching Mode, there is no Fully or Under Defined notation on the drawing. Assembly File - *.SLDASM To achieve FULLY DEFINED status, the propeller was “LOCKED” to the generator and if a text box is supplied it must have a “FIX” applied

SolidWorks Example http://youtu.be/1s-1CUoq1zE Assembly of a water filtering pitcher http://youtu.be/1s-1CUoq1zE

Water Pitcher Start The first part inserted will become fixed in space and will be placed at the origin aligning the 3 major planes (front, right, top) as a base for the assembly by selecting the part in the open parts list and clicking the green check mark Origin of Assembly Origin of Base Part Aligned Origins

Water Pitcher Example: First Mate Next lets bring in the top compartment and mate the two back surfaces

Water Pitcher: Top Compartment Similar constraints are added to the sides and top ridge in order to fully constrain the top compartment

We’ll add a concentric constraint in order to align the axis Water Pitcher: Filter Now lets add to our assembly the water filter which fits into the circular hole of the top compartment We’ll add a concentric constraint in order to align the axis

Water Pitcher: Inserted Filter The bottom ridge of the filter and the top of the compartment are selected and the faces are constrained to be flush

Water Pitcher: Section View A section view can be used in order to see that the mates are correct Choose the correct plane that cuts through an object

Water Pitcher: Sub-Assembly The top cover of the water pitcher consists of 2 pieces that were put together in a separate assembly and then brought into the current assembly

All Constraints applied are located in the Model Tree under Mates Deleting Constraints All Constraints applied are located in the Model Tree under Mates

Constraints can be selected and removed using the delete key Deleting Constraints Constraints can be selected and removed using the delete key

Assemblies Wrap-Up Assemblies – collection of 3D parts that form a system 6 Degrees of Freedom XYZ Translation XYZ Rotation Assembly Constraints Concentric Mating Surfaces Coincident Distance Application SW06: Buck-Eye-Phone Assembly

Activity (SW06) Create the base of any pinewood derby racer by inserting the chassis (first) and then inserting the axles Using the pre-made blocks and wheels construct some kind of pinewood derby racer using assembly constraints

Important Takeaways Assemblies are collections of 3D parts that form one engineering system Assembly constraints are used to locate parts in the assembly relative to each other

What’s Next? Due Next Class: SW06 Application Before next class, you will read about Exploded View and Extracting Drawings and Optional Extra Credit Advanced Assembly Modeling