PANDA Yoke of the Magnet

Slides:

Advertisements

Similar presentations

SiD Surface assembly Marco Oriunno (SLAC) MDI-CFS Meeting Sep. 4-6, 2014, Ichinoseki (Japan)

Advertisements

Cylinder Design Cylinder Liner (Barrel) Design

01/07/2008HCAL Main Meeting- Mechanical Integration1 ILD HCAL Mechanical Integration HCAL Main Meeting Kirsten Kschioneck, DESY.

Rosier Ph. – IPNO – Detector Dpt. – 27/05/2011APRIME HPS collaboration meeting 1/24 1- Vacuum chamber proposal 1.1- Stainless steel chamber design and.

WA105 General Meeting at CERN 21 & 22-January-2014 Enrique Calvo Alamillo.

MICE Collaboration Meeting at Frascati, Jun 26~29, 2005 Iron Shield Mounting Design Stephanie Yang.

ILC Main Linac Superconducting Cryogen Free Splittable Quadrupole Progress Report V. Kashikhin for Superconducting Magnet Team.

Design Group: Wei-Yuan Chu Adrian Conrad Thomas Hylton Scott Jean Nicholas Metzger IUPUI Faculty Advisor: Dr. Jie Chen Rolls-Royce Advisor: Timothy Fuesting.

Dec. 4, 2001 CERN-1 Hans de Vries VELO Mechanics  RF/vacuum foil  Rectangular bellow  Wake field suppressors  Cabling Summary & Outlook VELO mechanical.

Joint Institute for Nuclear Research Further optimization of the solenoid design A.Efremov, E.Koshurnikov, Yu.Lobanov, A.Makarov, A.Vodopianov GSI, Darmstadt,

1 Advanced Endplate - mechanics: Development of a Low-Material TPC Endplate for ILD Dan Peterson Laboratory for Elementary-Particle Physics, Cornell University.

09/03/2010 ADO-PO section meeting Beam Pipe Extraction/Insertion R. Vuillermet.

IPN Lyon ILD Mechanical structure April 2012 DHCAL Assembly, Tooling, Cooling J.C Ianigro - IPN Lyon -

10/28/2015Pierre Moyret1 Production of SQXF Magnet Components: Return on experience P.MOYRET EN-MME-FS.

DHCAL m3 module Ciemat status Enrique Calvo Alamillo EVO meeting 1 July 2010.

SAXS/WAXS Conversion for Beamline Engineering Review.

PRY Base - Contents l PRY Support/Base/Platform in the MICE Hall l History l Requirements l Environment l Design l Structural Integrity l Preparation l.

Support and magnet coil KEK Hiroshi Yamaoka Nov. 10, ‘04.

SBS Magnet John J. LeRose. Assembly drawing of 48D48 magnet as used at BNL (vertical field)

Mechanical Designs of The Central Detector Jinyu Fu

Status report AHCAL Mechanics Karsten Gadow CALICE Collaboration Meeting KEK, Studies of AHCAL absorber structure stability.

Pure Tungsten HCal: ‘staircase’ design Structural analyses and possible optimizations.

IPN Lyon ILD Mechanical structure February 2015 Design, Integration & Services J.C Ianigro - IPN Lyon -

Status of the PANDA Magnet Yoke Presented by E. Koshurnikov GSI, February 7, 2013.

Joint Institute for Nuclear Research Deformations and stresses in the flux return yoke A.Efremov, Yu.Lobanov, A.Makarov Darmstadt,

Thermal screen of the cryostat Presented by Evgeny Koshurnikov, GSI, Darmstadt September 8, 2015 Joint Institute for Nuclear Research (Dubna)

Status of the Yoke Interfaces Presented by Evgeny Koshurnikov February 2013.

PANDA Yoke unsolved Interface problems Presented by E. Koshurnikov (Dubna) December 9, 2011, GSI.

SPS High Energy LSS5 Thermal contact & cooling aspects

Status of the PANDA Magnet Yoke Presented by E. Koshurnikov GSI, June 26, 2013.

Summary of Platform and Hilman Rollers Deformation Studies John Amann ILC Mechanical Engineering 7/11/07.

Panda Forward Dipole Magnet design status International Workshop on Antiproton Physics and Technology at FAIR November 2015 Budker Institute of Nuclear.

M.Oriunno, SLAC 1 SiD installation with horizontal access shafts Marco Oriunno, SLAC SiD/ILD Engineering Meeting SLAC, December 2011.

EUDET HCAL prototype; mechanics Felix Sefkow Work by K.Gadow, K.Kschioneck CALIC collaboration meeting Daegu, Korea, February 20, 2009.

PRESSURE VESSEL. 1.Determine the bursting steam pressure of a steel shell with diameter of 10 inches and made of ¼ in thick steel plate. The joint efficiency.

Miscellaneous MEC Topics Mainz, CM September 2016, MEC Session J

PANDA Magnet Iron Yoke Strength Analysis

Status of the PANDA Solenoid Magnet Production in BINP

CBM magnet overview of the BINP work

Ferrara MECHANICAL SUPPORT for forward tracking detectors Federico Evangelisti INFN - Ferrara GSI – 2-6 march 2009.

Status of the PANDA Magnet mechanics (yoke & cryostat)

Miscellaneous Topics MEC Session, CM March 2017 at GSI J. Lühning, GSI

LBNF CAD models, Drawings and Component list

Platform Design for the Target Spectrometer using Heavy-Weight Rollers J. Lühning, GSI Darmstadt, Three design goals for Platform: Low construction.

Solenoid Yoke Door-Barrel Connection

Update of MVD services and requests

6th BINP-FAIR-GSI Workshop,

Present status of the flux return yoke design

The Budker Institute of Nuclear Physics

Crab Cavity HOM Coupler Specification Drawings & Tolerances

MICE Partial Return Yoke Mechanical Design

Micro Vertex Detector of PANDA Strip Detector

BINP, Sergey Pivovarov, Panda magnet meeting at GSl, June 07, 2016

PANDA Collaboration Meeting , BINP Sergey Pivovarov.

SiD Muon Yoke Structure - Deformation Studies -

Status of the PANDA Magnet

FRESCA2 Update on the dipole design and new calculations

Integration issues at IHEP

D2 and Q4 orbit corrector status

Challenges for FCC-ee MDI mechanical design

Status of the PANDA Solenoid Magnet Production in BINP

Final Design CGEM Workshop HIEP, 14/03/2017 M. Melchiorri - INFN FE.

Assembly, survey, alignment of the CBM Dipole Magnet

Status of the PANDA Solenoid Magnet Production in BINP

PANDA The conceptual design of the control Dewar

as a prototype for Super c-tau factory

Neutron guide Shielding Concept

After service guide for changing PCB

PANDA Cryostat and Yoke

BaBar LST Upgrade Richard F Boyce

Presentation transcript:

PANDA Yoke of the Magnet Preliminary Design Report Sergey Pivovarov, BINP, 03.10.2017

3D model of the Magnet, Yoke, Platform and Frame. The main parts of the detector PANDA for production at BINP

Configuration 12th layers of Yoke At the request of the GSI, the thickness of the inner plate of the downstream door was changed from 60 to 50 mm. The total thickness of the downstream door is 410 mm.

New Barrel part of the Yoke of the PANDA Detector After contact with the plant it was proposed to change the design of the octants of the yoke.

The old design of the octant of the Yoke The Octant consists of the plates and bars. The bars connect the plates of the octant by welding. Disadvantage of such design: 1. A lot of welds. 2. Final machining on the surface of welded joints. It's very bad for a tools. 3. Octant construction is not so rigid.

The modified octant of the Yoke The bars was replaced by a side plates. The side plates are manufactured using water cutting machine. Advantage of such design: The number of welds is reduced. Final machining on the surface of the side plates (not welded joints). 3. Octant construction is more rigid.

The Octant of the Yoke of the PANDA Detector For moving, rotation, assembling to be used the ears which will be removed after final assembly

Drawing of the Yoke, Platform and Frame.

Drawing of the Yoke, Platform and Frame.

Drawing of the Yoke.

Drawing of the Yoke.

Drawing of the Octant.

Drawing of the Octant.

3D-Model of the Upstream Door of Yoke. The door is made of 100 mm thick plates by welding. For moving, rotation and assembling the doors to be used the ears which will be removed after final Assembly.

Drawing of the Upstream Door.

Drawing of the half of Upstream Door.

Drawing of the half of Upstream Door.

3D-Model of the Downstream Door of Yoke. For moving, rotation and assembling the doors to be used the ears which will be removed after final Assembly.

Drawing of the Downstream Door.

Drawing of the Downstream Door.

3D model of the Platform and Frame. The weight of assembling is c~60 t

Drawing of the Platform and Frame.

Drawing of the Beam of Frame.

Drawing of the Beam of Frame.

Drawing of the Top Beam of Frame.

Calculatuonl of the Platform and Frame.

Results of calculation of the Platform and Frame. Stress The maximum equivalent stress is 50 MPa.

Results of calculation of the Platform and Frame. Deformation The maximum deformation is 0.5 mm.

3D model of the Magnet, Yoke, Platform and Frame.

Thank you for your attention!