Date of download: 10/16/2017 Copyright © ASME. All rights reserved. From: A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram J. Manuf. Sci. Eng. 2014;136(2):021005-021005-7. doi:10.1115/1.4025514 Figure Legend: Machine main structure and an illustration of the spindle with the belt transmission. (a) Machine main structure. (b) Spindle set and belt transmission.

Date of download: 10/16/2017 Copyright © ASME. All rights reserved. From: A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram J. Manuf. Sci. Eng. 2014;136(2):021005-021005-7. doi:10.1115/1.4025514 Figure Legend: Closed-loop control of the CNC spindle, supplied by the manufacturer [29]

Date of download: 10/16/2017 Copyright © ASME. All rights reserved. From: A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram J. Manuf. Sci. Eng. 2014;136(2):021005-021005-7. doi:10.1115/1.4025514 Figure Legend: Set up used to obtain the FRFs. (a) Data acquisition system. (b) Hammer and accelerometer.

Date of download: 10/16/2017 Copyright © ASME. All rights reserved. From: A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram J. Manuf. Sci. Eng. 2014;136(2):021005-021005-7. doi:10.1115/1.4025514 Figure Legend: Setup used for machining tests. (a) Test piece fixed on the machine table. (b) Position of the accelerometers.

Date of download: 10/16/2017 Copyright © ASME. All rights reserved. From: A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram J. Manuf. Sci. Eng. 2014;136(2):021005-021005-7. doi:10.1115/1.4025514 Figure Legend: Magnitude of FRF with spindle free and with M19 activated on the X direction

Date of download: 10/16/2017 Copyright © ASME. All rights reserved. From: A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram J. Manuf. Sci. Eng. 2014;136(2):021005-021005-7. doi:10.1115/1.4025514 Figure Legend: Magnitude of FRF with spindle free and with M19 activated on the Y direction

Date of download: 10/16/2017 Copyright © ASME. All rights reserved. From: A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram J. Manuf. Sci. Eng. 2014;136(2):021005-021005-7. doi:10.1115/1.4025514 Figure Legend: Stability Lobes Diagram for spindle free and with M19 activated. (a) Spindle free (without M19). (b) Spindle with M19 activated.

Date of download: 10/16/2017 Copyright © ASME. All rights reserved. From: A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram J. Manuf. Sci. Eng. 2014;136(2):021005-021005-7. doi:10.1115/1.4025514 Figure Legend: SLD for spindle free and with M19 together with the marks resulting from the end milling tests

Date of download: 10/16/2017 Copyright © ASME. All rights reserved. From: A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram J. Manuf. Sci. Eng. 2014;136(2):021005-021005-7. doi:10.1115/1.4025514 Figure Legend: Vibration levels for 0.4 mm and 1.0 mm depth of cut at 2500 rpm with photos of the surface aspect Fig. 9 (a) 0.4 mm depth of cut (b) 1.0 mm depth of cut