Make a connection and relationship of wood Plane The Wood

Learning Objectives: Students can explain the procedures that governed the selection of wood and applied according to company requirements.  Students can choose the appropriate timber based on its quality procedures.  Students can harvest timber properly. Teknik Konstruksi Kayu

Kinds of Plane Various kinds of crabs are often used is: Jack plane smooth plane jointer plane rabbet plane spoke shave Teknik Konstruksi Kayu

Section crab Crab house Crab eyes Baji crab Teknik Konstruksi Kayu

Setting Crab PROCESS Teknik Konstruksi Kayu

Step work plane Preparing the work piece in the size of a / net should consider steps - steps that work properly and systematically, such as the following:  The first plane side of the board width (face 1) first to clean the desired size, then give a sign that the harvest has been completed properly.  Both sides reap the thick planks (face 2) until the desired size.  Teknik Konstruksi Kayu

Step harvest work (continued) Third reaping results signaled that the surface of a wide board (face 1) have been perpendicular to the surface of thick boards (face 2).  The fourth plane thick side boards (face 3). The fifth plane wide boards side (face 4).  The sixth cut the length of the board according secant existing  Teknik Konstruksi Kayu

Step harvest work (continued) First  Reap the broad side Second Thick side of the plane Third  Tick  perpendicular Fourth  Reap the broad side  Until the desired size Fifth  Thick side of the plane  Until the desired size Sixth  Cut length Teknik Konstruksi Kayu

Example Teknologi dan Rekayasa

Thank You Teknologi dan Rekayasa