1. Vocational school Jean De Berry
THE JOINERY WORKSHOP MACHINES
USED TO PLANE IN FRANCE
Vocational school
Jean De Berry

2. Planing consists of :
Step 1 : surfacing and squaring one face (reference n°1)and one edge (reference n°2).
Step 2 : making the section of the piece .
I start by making the width, I put the reference n°2 on the table and after the thickness ,I put the surface the reference n°1 on the table.
Reference n°1
thickness
Reference n°2
width

3. is used to plane a piece of wood .
The surface planer
is used to plane a piece of wood .
Adjust the infeed table
Adjust the outfeed table
extraction
Bridge protector

4. The surface planer
Power control
The fence
Infeed table
Outfeed table

5. Is used to thick a piece of wood
Thickness planer
Is used to thick a piece of wood
Extraction
Adjustment of thickness
Power control
Raise and lower the table

6. A four side straightening
Is used to plane and square a piece of wood
Protection
extraction
Power control
Tools of a four side straightening

7. Cutter Head used on these different machines

8. THE END