Lenses: Drawings Lesson 9 November 23rd, 2010.

Slides:



Advertisements
Similar presentations
Created by Stephanie Ingle Kingwood High School
Advertisements

Convex and Concave Lenses
LENSES. LENSES A light ray bends as it enters glass and bends again as it leaves ◦This refraction is due to the difference in the average speed of light.
Convex and Concave Lenses
All visible objects emit or reflect light rays in all directions.
Types of Lenses If you have ever used a microscope, telescope, binoculars, or a camera, you have worked with one or more lenses. A lens is a curved transparent.
Chapter 11 Review Mirrors & Lenses. What is an angle of incidence? 2 The angle between an incident ray and the normal of an optical device. Category:
Ray Diagrams Notes.
Section 12.2 Pages Lens Terminology The principal axis is an imaginary line drawn through the optical centre perpendicular to both surfaces.
Optics.
Mirrors & Reflection.
Optics 2: REFRACTION & LENSES. REFRACTION Refraction: is the bending of waves because of the change of speed of a wave when it passes from one medium.
Curved Lenses SNC2P – Optics. Lenses Lenses are thin pieces of glass or plastic that have at least one curved side. There are two basic types of lenses:
 When light strikes the surface of an object  Some light is reflected  The rest is absorbed (and transferred into thermal energy)  Shiny objects,
Its now time to see the light…..  A lens is a curved transparent material that is smooth and regularly shaped so that when light strikes it, the light.
 Mirrors that are formed from a section of a sphere.  Convex: The reflection takes place on the outer surface of the spherical shape  Concave: The.
Mirrors.
Mirrors. Types of mirror There are two types of mirror Plane (flat) Curved Concave (curves in) Convex (curves out)
Refraction of light pg. 77.
Refraction. Refraction of Light When light waves pass from one medium to the next, its speed changes, causing it to bend. Going from lower to higher index.
Physics REVISION – Light - Reflection The law of reflection Sound waves and light waves reflect from surfaces. The angle of incidence equals the angle.
Unit 3 Lesson 3 Mirrors and Lenses
Chapter 23.
Optics: Reflection, Refraction Mirrors and Lenses
Reflection and Refraction
Lenses and Mirrors Mrs. Gergel. Lenses and Mirrors Mrs. Gergel.
While you are watching the video think about why this is happening.
Ch. 30 Lenses.
Lecture 47 – Lecture 48 Mirrors and Lenses Ozgur Unal
OPTICS Refraction in Lenses.
the change of direction of a ray of light
Refraction & Lenses Sections 11.7 and 11.8.
Chapter 13: Lenses and Optical Devices
Notes 23.3: Lenses and Images
Thin Lenses 1/p + 1/q = 1/f 1/f = (n -1) (1/R1 - 1/R2)
The Study of Mirrors and Lenses
Geometric Optics.
Lenses.
17.2 Mirrors, Lenses, and Images
Lesson P4 Part 2 ~ Lenses & Refraction
Converging Lenses Section 4.6 Lesson 13.
Lenses and Ray Diagrams.
Lenses and Ray Diagrams.
14-2 Thin lenses.
5.3 Using Lenses to Form Images
5.3 Using Lenses to Form Images
Lenses and Image.
Lenses Lesson 10.
the change of direction of a ray of light
Convex and Concave Lenses
Mirrors and Lenses A mirror is a sheet of glass that has a smooth, silver-colored coating on one side. When light passes through the glass, the coating.
Reflection from mirrors
LENSES.
LENSES A lens is defined as - A ground or molded piece of glass, plastic, or other transparent material with opposite surfaces either or both of which.
Lenses A lens is a transparent material (with at least one curved side) that causes light refracts in a predictable and useful way. Each ray is refracted.
5.3 Using Lenses to Form Images
Light and Lenses While Mirrors involve the reflection of light and the images we see, Lenses involve another property of light, refraction, or the effects.
Lenses.
5.3: Using Lenses to Form Images
Lenses: Day 1 -Converging Lenses
Transparent substances refract light
Thin Lenses.
Lenses 2: DIVERGING LENSES
Using Lenses to Form Images
Lenses
Lesson P4 Part 2 ~ Lenses & Refraction
5.3: Using Lenses to Form Images
(c) McGraw Hill Ryerson 2007
5.3 Using Lenses to Form Images
Unit 3 Lesson 3 Mirrors and Lenses
Presentation transcript:

Lenses: Drawings Lesson 9 November 23rd, 2010

Seeing in the Dark Modern night vision goggles are so sensitive that the tiny amounts of starlight reflecting off forests can be amplified to levels visible to pilots and rescue staff to give a clear view of the countryside. With these ultra-sensitive devices, you can literally fly and search by starlight.

Night vision goggles use lenses to focus light onto a device called an image intensifier. Inside the intensifier, the light energy releases a stream of particles. These particles then hit a phosphor-coated screen. The phosphors glow when the particles strike them. The person wearing the goggles sees a glowing green image

Lenses: Drawings

Types of Lenses If you have ever used a microscope, telescope, binoculars, or a camera, you have worked with one or more lenses. A lens is a curved transparent material that is smooth and regularly shaped so that when light strikes it, the light refracts in a predictable and useful way. Most lenses are made of transparent glass or very hard plastic.

Types of Lenses By shaping both sides of the lens, it is possible to make light rays diverge or converge as they pass through the lens. The most important aspect of lenses is that the light rays that refract through them can be used to magnify images or to project images onto a screen.

Types of Lenses Relative to the object, the image produced by a thin lens can be real or virtual, inverted or upright, larger or smaller.

Lens Terminology • The principal axis is an imaginary line drawn through the optical centre perpendicular to both surfaces. • The axis of symmetry is an imaginary vertical line drawn through the optical centre of a lens.

Lens Terminology • Both kinds of lenses have two principal focuses. The focal point where the light either comes to a focus or appears to diverge from a focus is given the symbol F, while that on the opposite side of the lens is represented by Fʹ.

Lens Terminology • The focal length, f, is the distance from the axis of symmetry to the principal focus measured along the principal axis. • Since light behaves the same way travelling in either direction through a lens, both types of thin lenses have two equal focal lengths.

Drawing a Ray Diagram for a Lens A ray diagram is a useful tool for predicting and understanding how images form as a result of light rays emerging from a lens. The index of refraction of a lens is greater than the index of refraction of air

Drawing a Ray Diagram for a Lens The light rays will then bend, or refract, away from the lens surface and toward the normal. When the light passes out of the lens at an angle, the light rays refract again, this time bending away from the normal. The light rays undergo two refractions, the first on entering the lens and the second on leaving the lens

Drawing a Ray Diagram for a Lens A thin lens is a lens that has a thickness that is slight compared to its focal length. An example of a thin lens is an eyeglass lens. You can simplify drawing a ray diagram of a thin lens without affecting its accuracy by assuming that all the refraction takes place at the axis of symmetry.

Concave Lenses A diverging lens is sometimes called a concave lens because it is thinner in the centre than at the edges. As parallel light rays pass through a concave lens, they are refracted away from the principal axis. The light rays diverge and they will never meet on the other side of the lens. The image formed is always upright, virtual and smaller than the object

Drawing a Concave Lens Ray Diagram Any two of the following rays may be used to locate the image: Draw a ray parallel to the principal axis that is refracted through the principal focus (F). Draw a ray that passes through the secondary principal focus (F') and refracts parallel to the principal axis. A ray that passes through the optical center goes straight through, without bending. Only two of these lines are needed to find the image

Drawing a Concave Lens Ray Diagram 2F F F’’ 2F’ S: Smaller A: Upright L: In front of F T: Virtual

Concave Lenses

Convex Lenses A converging lens is also called a convex lens because it is thicker at the centre than at the edges. As parallel light rays travel through a convex lens, they are refracted toward the principal axis. This causes the rays to move toward each other. The light rays cross at the focal point of the lens. Converging lenses are often used as magnifying glasses

Forming a Real Image During Reading Convex lenses are useful because they can form a real image on a screen. - - The screen must be placed so that the light rays strike it exactly as they converge. This way, when the light rays reflect off the screen, they are coming from a single point. -When the rays from every point on the candle are sent to the screen, a complete image is formed.

Drawing a Convex Lens Ray Diagram Any ray that is parallel to the principal axis is refracted through the principal focus (F). A ray that passes through the secondary principal focus (F') is refracted parallel to the principal axis. A ray that passes through the optical center goes straight through, without bending As with converging mirrors, only two rays are required to locate an image. The third one acts as a check

Object between 2F’ and F’ Ended here S: Larger A: Inverted L: Behind 2F T: Real

Object beyond 2F’ (An object more than two times the distance of the focal length from the lens) S: Smaller A: Inverted L: Between F and 2F T: Real

More examples

Object at 2F’ 2F’ F’ F 2F S: Same size A: Inverted L: At 2F T: Real

Object at F’ NO IMAGE FORMED 2F’ F’ F 2F

Object in front of F’ S: Larger A: Upright L: Behind F’ T: Virtual 2F’

Convex Lenses

Work on the Lens Ray Diagram Problems Hand in