Copyright Silca S.p.A TRIAX-E.CODE

TRIAX-E.CODE Triax-e.code Triax-e.code is a new Silca electronic high security key machine for duplication and code cutting of dimple and sidewinder keys.

Copyright Silca S.p.A TRIAX-E.CODE Our innovative technology guarantees maximum quality and precision in movements thanks to the combined action of sensors and photocells. This system results in very smooth movements of the machine and guarantees centesimal precision results in duplication.

Copyright Silca S.p.A TRIAX-E.CODE Innovative design Back-lite display 4x20 characters Mobile safety shield Safety stop Test functions on board Machine built to CE standards

Copyright Silca S.p.A TRIAX-E.CODE Axes and jaw automatic calibration Tracer Tower Innovative system enabling decoding of dimple, sidewinder and more Quick and easy tool release Movements on three axis Dual speed motor Standard jaw

Copyright Silca S.p.A TRIAX-E.CODE Triax-e.code has been designed to work either Stand-Alone or with a Personal Computer. STAND ALONE or WITH PC

Copyright Silca S.p.A TRIAX-E.CODE Triax-e.code Stand Alone Triax-e.code is the first electronic three axes key cutting machine which operates in Stand Alone mode for both duplication and code cutting automatically converting the decoded information to original lock specifications. STAND ALONE

Copyright Silca S.p.A TRIAX-E.CODE The on board machine program memory includes over data cards that can be processed for code cutting a wide range of lock systems. The machine software is also designed to receive customized configurations for both data cards and tables used for indirect code searches. On board user friendly functions: calibrations, diagnostics and configurations… The machine and data base can be easily updated by Personal Computer via serial port.

Copyright Silca S.p.A TRIAX-E.CODE Triax-e.code with PC: Silca Key Programs for Windows Silca Key Programs includes all lock systems and cards containing lists of codes that are available to Silca. WITH P.C.

Copyright Silca S.p.A TRIAX-E.CODE The Silca Key Programs permits you to utilise the Triax-e.code machine to its fullest potential: Management of Customer archives Planning and transmission of a queue management system Reference search by means of entering direct or indirect codes Partial combination search Possibility to correct existing key card data manually by the operator Complete integration with the Marker 2000 machine Compatible with most Master Keying Programs available on the market

Copyright Silca S.p.A TRIAX-E.CODE The Silca Key Programs provides not only key technical drawings, but also all useful information regarding the selected key.

Copyright Silca S.p.A TRIAX-E.CODE Personal Computer requirements: Minimum PC characteristics Pentium ® 90MHz - 16 MB RAM SVGA board - 640x colours 60 MB free on hard disk Cd-Rom 12x reader - Serial port - Windows ® 95 Recommended parameters Pentium ® II - 32 MB RAM SVGA board - 800x colours 200 MB free on hard disk Cd-Rom 24x reader - Windows ® 95/98/NT ®

Copyright Silca S.p.A TRIAX-E.CODE OPTIONALS Jaws and adaptors Personalized data base Vacuum system* Numerous specific clamps and adaptors designed to cut personalised special systems are made available on request. *Activated by compressed air from a separate unit.

Copyright Silca S.p.A TRIAX-E.CODE Technical Data Cutter Motor:Two-speed single phase Power:Single phase 230V/50Hz Movements:On three axes with preloaded re-circulating ball screw roller guides that are are activated by step motors Runs:X: 55 mm - Y: 25 mm - Z: 27 mm Cutter Spindle Speed: 3500 rpm/7000 rpm Standard Jaw:interchangeable “R1” jaw Tolerances:X-Y-Z Axes =+/- 0,03 mm Dimensions:length 500mm-width 500mm-height 500mm (with shield raised 700mm)